DOUBLE PRECISION routines for symmetric or Hermitian positive definite, packed storage matrix
dppcon
USAGE:
rcond, info = NumRu::Lapack.dppcon( uplo, ap, anorm, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPCON( UPLO, N, AP, ANORM, RCOND, WORK, IWORK, INFO )
* Purpose
* =======
*
* DPPCON estimates the reciprocal of the condition number (in the
* 1-norm) of a real symmetric positive definite packed matrix using
* the Cholesky factorization A = U**T*U or A = L*L**T computed by
* DPPTRF.
*
* An estimate is obtained for norm(inv(A)), and the reciprocal of the
* condition number is computed as RCOND = 1 / (ANORM * norm(inv(A))).
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* AP (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* The triangular factor U or L from the Cholesky factorization
* A = U**T*U or A = L*L**T, packed columnwise in a linear
* array. The j-th column of U or L is stored in the array AP
* as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
* ANORM (input) DOUBLE PRECISION
* The 1-norm (or infinity-norm) of the symmetric matrix A.
*
* RCOND (output) DOUBLE PRECISION
* The reciprocal of the condition number of the matrix A,
* computed as RCOND = 1/(ANORM * AINVNM), where AINVNM is an
* estimate of the 1-norm of inv(A) computed in this routine.
*
* WORK (workspace) DOUBLE PRECISION array, dimension (3*N)
*
* IWORK (workspace) INTEGER array, dimension (N)
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
*
* =====================================================================
*
go to the page top
dppequ
USAGE:
s, scond, amax, info = NumRu::Lapack.dppequ( uplo, ap, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPEQU( UPLO, N, AP, S, SCOND, AMAX, INFO )
* Purpose
* =======
*
* DPPEQU computes row and column scalings intended to equilibrate a
* symmetric positive definite matrix A in packed storage and reduce
* its condition number (with respect to the two-norm). S contains the
* scale factors, S(i)=1/sqrt(A(i,i)), chosen so that the scaled matrix
* B with elements B(i,j)=S(i)*A(i,j)*S(j) has ones on the diagonal.
* This choice of S puts the condition number of B within a factor N of
* the smallest possible condition number over all possible diagonal
* scalings.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* AP (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* The upper or lower triangle of the symmetric matrix A, packed
* columnwise in a linear array. The j-th column of A is stored
* in the array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*
* S (output) DOUBLE PRECISION array, dimension (N)
* If INFO = 0, S contains the scale factors for A.
*
* SCOND (output) DOUBLE PRECISION
* If INFO = 0, S contains the ratio of the smallest S(i) to
* the largest S(i). If SCOND >= 0.1 and AMAX is neither too
* large nor too small, it is not worth scaling by S.
*
* AMAX (output) DOUBLE PRECISION
* Absolute value of largest matrix element. If AMAX is very
* close to overflow or very close to underflow, the matrix
* should be scaled.
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: if INFO = i, the i-th diagonal element is nonpositive.
*
* =====================================================================
*
go to the page top
dpprfs
USAGE:
ferr, berr, info, x = NumRu::Lapack.dpprfs( uplo, ap, afp, b, x, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPRFS( UPLO, N, NRHS, AP, AFP, B, LDB, X, LDX, FERR, BERR, WORK, IWORK, INFO )
* Purpose
* =======
*
* DPPRFS improves the computed solution to a system of linear
* equations when the coefficient matrix is symmetric positive definite
* and packed, and provides error bounds and backward error estimates
* for the solution.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* NRHS (input) INTEGER
* The number of right hand sides, i.e., the number of columns
* of the matrices B and X. NRHS >= 0.
*
* AP (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* The upper or lower triangle of the symmetric matrix A, packed
* columnwise in a linear array. The j-th column of A is stored
* in the array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
*
* AFP (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* The triangular factor U or L from the Cholesky factorization
* A = U**T*U or A = L*L**T, as computed by DPPTRF/ZPPTRF,
* packed columnwise in a linear array in the same format as A
* (see AP).
*
* B (input) DOUBLE PRECISION array, dimension (LDB,NRHS)
* The right hand side matrix B.
*
* LDB (input) INTEGER
* The leading dimension of the array B. LDB >= max(1,N).
*
* X (input/output) DOUBLE PRECISION array, dimension (LDX,NRHS)
* On entry, the solution matrix X, as computed by DPPTRS.
* On exit, the improved solution matrix X.
*
* LDX (input) INTEGER
* The leading dimension of the array X. LDX >= max(1,N).
*
* FERR (output) DOUBLE PRECISION array, dimension (NRHS)
* The estimated forward error bound for each solution vector
* X(j) (the j-th column of the solution matrix X).
* If XTRUE is the true solution corresponding to X(j), FERR(j)
* is an estimated upper bound for the magnitude of the largest
* element in (X(j) - XTRUE) divided by the magnitude of the
* largest element in X(j). The estimate is as reliable as
* the estimate for RCOND, and is almost always a slight
* overestimate of the true error.
*
* BERR (output) DOUBLE PRECISION array, dimension (NRHS)
* The componentwise relative backward error of each solution
* vector X(j) (i.e., the smallest relative change in
* any element of A or B that makes X(j) an exact solution).
*
* WORK (workspace) DOUBLE PRECISION array, dimension (3*N)
*
* IWORK (workspace) INTEGER array, dimension (N)
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
*
* Internal Parameters
* ===================
*
* ITMAX is the maximum number of steps of iterative refinement.
*
* =====================================================================
*
go to the page top
dppsv
USAGE:
info, ap, b = NumRu::Lapack.dppsv( uplo, n, ap, b, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPSV( UPLO, N, NRHS, AP, B, LDB, INFO )
* Purpose
* =======
*
* DPPSV computes the solution to a real system of linear equations
* A * X = B,
* where A is an N-by-N symmetric positive definite matrix stored in
* packed format and X and B are N-by-NRHS matrices.
*
* The Cholesky decomposition is used to factor A as
* A = U**T* U, if UPLO = 'U', or
* A = L * L**T, if UPLO = 'L',
* where U is an upper triangular matrix and L is a lower triangular
* matrix. The factored form of A is then used to solve the system of
* equations A * X = B.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The number of linear equations, i.e., the order of the
* matrix A. N >= 0.
*
* NRHS (input) INTEGER
* The number of right hand sides, i.e., the number of columns
* of the matrix B. NRHS >= 0.
*
* AP (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* On entry, the upper or lower triangle of the symmetric matrix
* A, packed columnwise in a linear array. The j-th column of A
* is stored in the array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
* See below for further details.
*
* On exit, if INFO = 0, the factor U or L from the Cholesky
* factorization A = U**T*U or A = L*L**T, in the same storage
* format as A.
*
* B (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
* On entry, the N-by-NRHS right hand side matrix B.
* On exit, if INFO = 0, the N-by-NRHS solution matrix X.
*
* LDB (input) INTEGER
* The leading dimension of the array B. LDB >= max(1,N).
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: if INFO = i, the leading minor of order i of A is not
* positive definite, so the factorization could not be
* completed, and the solution has not been computed.
*
* Further Details
* ===============
*
* The packed storage scheme is illustrated by the following example
* when N = 4, UPLO = 'U':
*
* Two-dimensional storage of the symmetric matrix A:
*
* a11 a12 a13 a14
* a22 a23 a24
* a33 a34 (aij = conjg(aji))
* a44
*
* Packed storage of the upper triangle of A:
*
* AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
* =====================================================================
*
* .. External Functions ..
LOGICAL LSAME
EXTERNAL LSAME
* ..
* .. External Subroutines ..
EXTERNAL DPPTRF, DPPTRS, XERBLA
* ..
* .. Intrinsic Functions ..
INTRINSIC MAX
* ..
go to the page top
dppsvx
USAGE:
x, rcond, ferr, berr, info, ap, afp, equed, s, b = NumRu::Lapack.dppsvx( fact, uplo, ap, afp, equed, s, b, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPSVX( FACT, UPLO, N, NRHS, AP, AFP, EQUED, S, B, LDB, X, LDX, RCOND, FERR, BERR, WORK, IWORK, INFO )
* Purpose
* =======
*
* DPPSVX uses the Cholesky factorization A = U**T*U or A = L*L**T to
* compute the solution to a real system of linear equations
* A * X = B,
* where A is an N-by-N symmetric positive definite matrix stored in
* packed format and X and B are N-by-NRHS matrices.
*
* Error bounds on the solution and a condition estimate are also
* provided.
*
* Description
* ===========
*
* The following steps are performed:
*
* 1. If FACT = 'E', real scaling factors are computed to equilibrate
* the system:
* diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B
* Whether or not the system will be equilibrated depends on the
* scaling of the matrix A, but if equilibration is used, A is
* overwritten by diag(S)*A*diag(S) and B by diag(S)*B.
*
* 2. If FACT = 'N' or 'E', the Cholesky decomposition is used to
* factor the matrix A (after equilibration if FACT = 'E') as
* A = U**T* U, if UPLO = 'U', or
* A = L * L**T, if UPLO = 'L',
* where U is an upper triangular matrix and L is a lower triangular
* matrix.
*
* 3. If the leading i-by-i principal minor is not positive definite,
* then the routine returns with INFO = i. Otherwise, the factored
* form of A is used to estimate the condition number of the matrix
* A. If the reciprocal of the condition number is less than machine
* precision, INFO = N+1 is returned as a warning, but the routine
* still goes on to solve for X and compute error bounds as
* described below.
*
* 4. The system of equations is solved for X using the factored form
* of A.
*
* 5. Iterative refinement is applied to improve the computed solution
* matrix and calculate error bounds and backward error estimates
* for it.
*
* 6. If equilibration was used, the matrix X is premultiplied by
* diag(S) so that it solves the original system before
* equilibration.
*
* Arguments
* =========
*
* FACT (input) CHARACTER*1
* Specifies whether or not the factored form of the matrix A is
* supplied on entry, and if not, whether the matrix A should be
* equilibrated before it is factored.
* = 'F': On entry, AFP contains the factored form of A.
* If EQUED = 'Y', the matrix A has been equilibrated
* with scaling factors given by S. AP and AFP will not
* be modified.
* = 'N': The matrix A will be copied to AFP and factored.
* = 'E': The matrix A will be equilibrated if necessary, then
* copied to AFP and factored.
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The number of linear equations, i.e., the order of the
* matrix A. N >= 0.
*
* NRHS (input) INTEGER
* The number of right hand sides, i.e., the number of columns
* of the matrices B and X. NRHS >= 0.
*
* AP (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* On entry, the upper or lower triangle of the symmetric matrix
* A, packed columnwise in a linear array, except if FACT = 'F'
* and EQUED = 'Y', then A must contain the equilibrated matrix
* diag(S)*A*diag(S). The j-th column of A is stored in the
* array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
* See below for further details. A is not modified if
* FACT = 'F' or 'N', or if FACT = 'E' and EQUED = 'N' on exit.
*
* On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by
* diag(S)*A*diag(S).
*
* AFP (input or output) DOUBLE PRECISION array, dimension
* (N*(N+1)/2)
* If FACT = 'F', then AFP is an input argument and on entry
* contains the triangular factor U or L from the Cholesky
* factorization A = U'*U or A = L*L', in the same storage
* format as A. If EQUED .ne. 'N', then AFP is the factored
* form of the equilibrated matrix A.
*
* If FACT = 'N', then AFP is an output argument and on exit
* returns the triangular factor U or L from the Cholesky
* factorization A = U'*U or A = L*L' of the original matrix A.
*
* If FACT = 'E', then AFP is an output argument and on exit
* returns the triangular factor U or L from the Cholesky
* factorization A = U'*U or A = L*L' of the equilibrated
* matrix A (see the description of AP for the form of the
* equilibrated matrix).
*
* EQUED (input or output) CHARACTER*1
* Specifies the form of equilibration that was done.
* = 'N': No equilibration (always true if FACT = 'N').
* = 'Y': Equilibration was done, i.e., A has been replaced by
* diag(S) * A * diag(S).
* EQUED is an input argument if FACT = 'F'; otherwise, it is an
* output argument.
*
* S (input or output) DOUBLE PRECISION array, dimension (N)
* The scale factors for A; not accessed if EQUED = 'N'. S is
* an input argument if FACT = 'F'; otherwise, S is an output
* argument. If FACT = 'F' and EQUED = 'Y', each element of S
* must be positive.
*
* B (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
* On entry, the N-by-NRHS right hand side matrix B.
* On exit, if EQUED = 'N', B is not modified; if EQUED = 'Y',
* B is overwritten by diag(S) * B.
*
* LDB (input) INTEGER
* The leading dimension of the array B. LDB >= max(1,N).
*
* X (output) DOUBLE PRECISION array, dimension (LDX,NRHS)
* If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to
* the original system of equations. Note that if EQUED = 'Y',
* A and B are modified on exit, and the solution to the
* equilibrated system is inv(diag(S))*X.
*
* LDX (input) INTEGER
* The leading dimension of the array X. LDX >= max(1,N).
*
* RCOND (output) DOUBLE PRECISION
* The estimate of the reciprocal condition number of the matrix
* A after equilibration (if done). If RCOND is less than the
* machine precision (in particular, if RCOND = 0), the matrix
* is singular to working precision. This condition is
* indicated by a return code of INFO > 0.
*
* FERR (output) DOUBLE PRECISION array, dimension (NRHS)
* The estimated forward error bound for each solution vector
* X(j) (the j-th column of the solution matrix X).
* If XTRUE is the true solution corresponding to X(j), FERR(j)
* is an estimated upper bound for the magnitude of the largest
* element in (X(j) - XTRUE) divided by the magnitude of the
* largest element in X(j). The estimate is as reliable as
* the estimate for RCOND, and is almost always a slight
* overestimate of the true error.
*
* BERR (output) DOUBLE PRECISION array, dimension (NRHS)
* The componentwise relative backward error of each solution
* vector X(j) (i.e., the smallest relative change in
* any element of A or B that makes X(j) an exact solution).
*
* WORK (workspace) DOUBLE PRECISION array, dimension (3*N)
*
* IWORK (workspace) INTEGER array, dimension (N)
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: if INFO = i, and i is
* <= N: the leading minor of order i of A is
* not positive definite, so the factorization
* could not be completed, and the solution has not
* been computed. RCOND = 0 is returned.
* = N+1: U is nonsingular, but RCOND is less than machine
* precision, meaning that the matrix is singular
* to working precision. Nevertheless, the
* solution and error bounds are computed because
* there are a number of situations where the
* computed solution can be more accurate than the
* value of RCOND would suggest.
*
* Further Details
* ===============
*
* The packed storage scheme is illustrated by the following example
* when N = 4, UPLO = 'U':
*
* Two-dimensional storage of the symmetric matrix A:
*
* a11 a12 a13 a14
* a22 a23 a24
* a33 a34 (aij = conjg(aji))
* a44
*
* Packed storage of the upper triangle of A:
*
* AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
* =====================================================================
*
go to the page top
dpptrf
USAGE:
info, ap = NumRu::Lapack.dpptrf( uplo, n, ap, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPTRF( UPLO, N, AP, INFO )
* Purpose
* =======
*
* DPPTRF computes the Cholesky factorization of a real symmetric
* positive definite matrix A stored in packed format.
*
* The factorization has the form
* A = U**T * U, if UPLO = 'U', or
* A = L * L**T, if UPLO = 'L',
* where U is an upper triangular matrix and L is lower triangular.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* AP (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* On entry, the upper or lower triangle of the symmetric matrix
* A, packed columnwise in a linear array. The j-th column of A
* is stored in the array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
* See below for further details.
*
* On exit, if INFO = 0, the triangular factor U or L from the
* Cholesky factorization A = U**T*U or A = L*L**T, in the same
* storage format as A.
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: if INFO = i, the leading minor of order i is not
* positive definite, and the factorization could not be
* completed.
*
* Further Details
* ======= =======
*
* The packed storage scheme is illustrated by the following example
* when N = 4, UPLO = 'U':
*
* Two-dimensional storage of the symmetric matrix A:
*
* a11 a12 a13 a14
* a22 a23 a24
* a33 a34 (aij = aji)
* a44
*
* Packed storage of the upper triangle of A:
*
* AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
*
* =====================================================================
*
go to the page top
dpptri
USAGE:
info, ap = NumRu::Lapack.dpptri( uplo, n, ap, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPTRI( UPLO, N, AP, INFO )
* Purpose
* =======
*
* DPPTRI computes the inverse of a real symmetric positive definite
* matrix A using the Cholesky factorization A = U**T*U or A = L*L**T
* computed by DPPTRF.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangular factor is stored in AP;
* = 'L': Lower triangular factor is stored in AP.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* AP (input/output) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* On entry, the triangular factor U or L from the Cholesky
* factorization A = U**T*U or A = L*L**T, packed columnwise as
* a linear array. The j-th column of U or L is stored in the
* array AP as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
* On exit, the upper or lower triangle of the (symmetric)
* inverse of A, overwriting the input factor U or L.
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: if INFO = i, the (i,i) element of the factor U or L is
* zero, and the inverse could not be computed.
*
* =====================================================================
*
go to the page top
dpptrs
USAGE:
info, b = NumRu::Lapack.dpptrs( uplo, n, ap, b, [:usage => usage, :help => help])
FORTRAN MANUAL
SUBROUTINE DPPTRS( UPLO, N, NRHS, AP, B, LDB, INFO )
* Purpose
* =======
*
* DPPTRS solves a system of linear equations A*X = B with a symmetric
* positive definite matrix A in packed storage using the Cholesky
* factorization A = U**T*U or A = L*L**T computed by DPPTRF.
*
* Arguments
* =========
*
* UPLO (input) CHARACTER*1
* = 'U': Upper triangle of A is stored;
* = 'L': Lower triangle of A is stored.
*
* N (input) INTEGER
* The order of the matrix A. N >= 0.
*
* NRHS (input) INTEGER
* The number of right hand sides, i.e., the number of columns
* of the matrix B. NRHS >= 0.
*
* AP (input) DOUBLE PRECISION array, dimension (N*(N+1)/2)
* The triangular factor U or L from the Cholesky factorization
* A = U**T*U or A = L*L**T, packed columnwise in a linear
* array. The j-th column of U or L is stored in the array AP
* as follows:
* if UPLO = 'U', AP(i + (j-1)*j/2) = U(i,j) for 1<=i<=j;
* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = L(i,j) for j<=i<=n.
*
* B (input/output) DOUBLE PRECISION array, dimension (LDB,NRHS)
* On entry, the right hand side matrix B.
* On exit, the solution matrix X.
*
* LDB (input) INTEGER
* The leading dimension of the array B. LDB >= max(1,N).
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
*
* =====================================================================
*
* .. Local Scalars ..
LOGICAL UPPER
INTEGER I
* ..
* .. External Functions ..
LOGICAL LSAME
EXTERNAL LSAME
* ..
* .. External Subroutines ..
EXTERNAL DTPSV, XERBLA
* ..
* .. Intrinsic Functions ..
INTRINSIC MAX
* ..
go to the page top
back to matrix types
back to data types