| Subroutine : |
|
| FlagSSModelSO : | logical , intent(in ), optional
| : | スラブオーシャン オン／オフ. flag for use of slab ocean on/off
|
|
| xy_SoilMoistB(0:imax-1, 1:jmax) : | real(DP), intent(in ), optional
| : | $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2) Soil moisture (kg m-2)
|
|
| xy_SurfSnowB(0:imax-1, 1:jmax) : | real(DP), intent(in ), optional
| : | $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2) Surface snow amount (kg m-2)
|
|
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | 地表面温度. Surface temperature
|
|
| xy_SurfAlbedo(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
|
| xy_SurfHumidCoef(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | 地表湿潤度. Surface humidity coefficient
|
|
| xy_SurfRoughLength(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | 地表粗度長. Surface rough length
|
|
| xy_SurfHeatCapacity(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | 地表熱容量. Surface heat capacity
|
|
| xy_GroundTempFlux(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | 地中熱フラックス. Ground temperature flux
|
|
| xy_SurfCond(0:imax-1, 1:jmax) : | integer , intent(inout), optional
| : | 地表状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)
|
|
| xy_SurfHeight(0:imax-1, 1:jmax) : | real(DP), intent(inout), optional
| : | $ z_s $ . 地表面高度. Surface height.
|
|
| xy_SeaIceConc(0:imax-1,1:jmax) : | real(DP), intent(inout), optional
| : | 海氷密度 (0 <= xy_SeaIceConc <= 1) Sea ice concentration (0 <=
xy_SeaIceConc <= 1)
|
|
subroutine SetSurfaceProperties( FlagSSModelSO, xy_SoilMoistB, xy_SurfSnowB, xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoef, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_GroundTempFlux, xy_SurfCond, xy_SurfHeight, xy_SeaIceConc )
!
! 惑星表面特性を設定します.
!
! Set surface properties.
!
! モジュール引用 ; USE statements
!
! 雪と海氷の定数の設定
! Setting constants of snow and sea ice
!
use constants_snowseaice, only: SeaIceThreshold
! 地表面データ提供
! Prepare surface data
!
use surface_data, only: SetSurfData
! Matthews のデータに基づく惑星表面アルベド設定
! set surface albedo based on data by Matthews
!
use albedo_Matthews, only: SetAlbedoMathews
! バケツモデル
! Bucket model
!
use Bucket_Model, only : BucketModHumidCoef
! 雪と海氷によるアルベド変化
! modification of surface albedo on the snow covered ground and on the sea ice
!
use modify_albedo_snowseaice, only: ModAlbedoDueToSnowSeaIce
! 粗度長の設定, 陸面と海洋の差のみ考慮
! Set roughness length, only considering land-ocean contrast
!
use roughlen_landoceancontrast, only: SetRoughLenLandOceanContrast
! Matthews のデータに基づく地面粗度の設定
! set roughness length on land surface based on data by Matthews
!
use roughlen_Matthews, only: SetRoughLenLandMatthews
! gtool4 データ入力
! Gtool4 data input
!
use gtool_history, only: HistoryGet
! 文字列操作
! Character handling
!
use dc_string, only: toChar
! 時刻管理
! Time control
!
use timeset, only: TimeN, EndTime, TimesetClockStart, TimesetClockStop
use read_time_series, only: SetValuesFromTimeSeriesWrapper
! 宣言文 ; Declaration statements
!
implicit none
logical , intent(in ), optional:: FlagSSModelSO
! スラブオーシャン オン／オフ.
! flag for use of slab ocean on/off
real(DP), intent(in ), optional:: xy_SoilMoistB(0:imax-1, 1:jmax)
! $ M_ws (t-\Delta t) $ . 土壌水分 (kg m-2)
! Soil moisture (kg m-2)
real(DP), intent(in ), optional:: xy_SurfSnowB(0:imax-1, 1:jmax)
! $ M_ss (t-\Delta t) $ . 積雪量 (kg m-2)
! Surface snow amount (kg m-2)
real(DP), intent(inout), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
real(DP), intent(inout), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
! 地表アルベド.
! Surface albedo
real(DP), intent(inout), optional:: xy_SurfHumidCoef (0:imax-1, 1:jmax)
! 地表湿潤度.
! Surface humidity coefficient
real(DP), intent(inout), optional:: xy_SurfRoughLength (0:imax-1, 1:jmax)
! 地表粗度長.
! Surface rough length
real(DP), intent(inout), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
! 地表熱容量.
! Surface heat capacity
real(DP), intent(inout), optional:: xy_GroundTempFlux (0:imax-1, 1:jmax)
! 地中熱フラックス.
! Ground temperature flux
integer , intent(inout), optional:: xy_SurfCond (0:imax-1, 1:jmax)
! 地表状態 (0: 固定, 1: 可変).
! Surface condition (0: fixed, 1: variable)
real(DP), intent(inout), optional:: xy_SurfHeight (0:imax-1, 1:jmax)
! $ z_s $ . 地表面高度.
! Surface height.
real(DP), intent(inout), optional:: xy_SeaIceConc(0:imax-1,1:jmax)
! 海氷密度 (0 <= xy_SeaIceConc <= 1)
! Sea ice concentration (0 <= xy_SeaIceConc <= 1)
! 作業変数
! Work variables
!
real(DP), allocatable, save:: xy_SurfTempSave (:,:)
! 地表面温度の保存値 (K)
! Saved values of surface temperature (K)
real(DP), allocatable, save:: xy_SeaIceConcSave(:,:)
! 海氷面密度の保存値
! Saved values of sea ice concentration
real(DP), allocatable, save:: xy_SurfAlbedoSave(:,:)
! アルベドの保存値
! Saved values of albedo
logical, save:: flag_first_SurfCond = .true.
! 初回を示すフラグ.
! Flag that indicates first loop
!
logical, save:: flag_first_SeaIceConc = .true.
logical, save:: flag_first_SurfTemp = .true.
logical, save:: flag_first_SurfHeight = .true.
logical, save:: flag_first_SurfAlbedo = .true.
logical, save:: flag_first_SurfHumidCoef = .true.
logical, save:: flag_first_SurfRoughLength = .true.
logical, save:: flag_first_SurfHeatCapacity = .true.
logical, save:: flag_first_GroundTempFlux = .true.
logical:: flag_mpi_init
integer:: i ! 経度方向に回る DO ループ用作業変数
! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
! 実行文 ; Executable statement
!
! 計算時間計測開始
! Start measurement of computation time
!
call TimesetClockStart( module_name )
! 初期化
! Initialization
!
if ( .not. surface_properties_inited ) call SurfacePropertiesInit
flag_mpi_init = .true.
! NOTICE:
! The surface condition has to be set, before other fields are set.
!
! 地表状態
! Surface condition
!
if ( present(xy_SurfCond) ) then
if ( SurfCondSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfCond ) then
call HistoryGet( SurfCondFile, SurfCondName, xy_SurfCond, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( SurfCondSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfCond ) then
call SetSurfData( xy_SurfCond = xy_SurfCond )
end if
else
call MessageNotify( 'E', module_name, ' SurfCondSetting = %c is not appropriate.', c1 = trim(SurfCondSetting) )
end if
flag_first_SurfCond = .false.
end if
! NOTICE:
! The sea ice distribution has to be set, before set surface temperature.
!
! 海氷面密度
! Sea ice concentration
!
if ( present(xy_SeaIceConc) ) then
if ( flag_first_SeaIceConc ) then
! 保存用変数の割付
! Allocate a variable for save
!
allocate( xy_SeaIceConcSave(0:imax-1, 1:jmax) )
end if
if ( SeaIceSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
!!$ if ( flag_first_SeaIceConc ) then
!!$ call HistoryGet( &
!!$ & SeaIceFile, SeaIceName, & ! (in)
!!$ & xy_SeaIceConcSave, & ! (out)
!!$ & flag_mpi_split = flag_mpi_init ) ! (in) optional
!!$ end if
call SetValuesFromTimeSeriesWrapper( SeaIceFile, SeaIceName, xy_SeaIceConcSave, 'SIC' )
else if ( SeaIceSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SeaIceConc ) then
call SetSurfData( xy_SeaIceConc = xy_SeaIceConcSave )
end if
else
call MessageNotify( 'E', module_name, ' SeaIceSetting = %c is not appropriate.', c1 = trim(SeaIceSetting) )
end if
! 海氷面密度の設定 ( xy_SurfCond == 0 の場所のみ )
! Setting of sea ice concentration ( where xy_SurfCond == 0 only )
!
xy_SeaIceConc = xy_SeaIceConcSave
flag_first_SeaIceConc = .false.
end if
! NOTICE:
! Before set surface temperature, sea ice distribution has to be set.
!
! 地表面温度
! surface temperature
!
if ( present(xy_SurfTemp) ) then
if ( flag_first_SurfTemp ) then
! 保存用変数の割付
! Allocate a variable for save
!
allocate( xy_SurfTempSave (0:imax-1, 1:jmax) )
end if
if ( SurfTempSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
!!$ if ( flag_first_SurfTemp ) then
!!$ call HistoryGet( &
!!$ & SurfTempFile, SurfTempName, & ! (in)
!!$ & xy_SurfTempSave, & ! (out)
!!$ & flag_mpi_split = flag_mpi_init ) ! (in) optional
!!$ end if
call SetValuesFromTimeSeriesWrapper( SurfTempFile, SurfTempName, xy_SurfTempSave, 'SST' )
else if ( SurfTempSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfTemp ) then
call SetSurfData( xy_SurfTemp = xy_SurfTempSave )
end if
else
call MessageNotify( 'E', module_name, ' SurfTempSetting = %c is not appropriate.', c1 = trim(SurfTempSetting) )
end if
! 地表面温度を SST で置き換え ( xy_SurfCond <=0 の場所のみ )
! Surface temperature is replaced with SST ( only xy_SurfCond <=0 )
!
if ( present(xy_SurfTemp) ) then
do j = 1, jmax
do i = 0, imax-1
if ( ( xy_SurfCond(i,j) <= 0 ) .and. ( xy_SurfTempSave(i,j) > 0.0_DP ) .and. ( xy_SeaIceConc(i,j) < SeaIceThreshold ) ) then
if ( ( .not. present( FlagSSModelSO ) ) .or. ( .not. FlagSSModelSO ) ) then
xy_SurfTemp(i,j) = xy_SurfTempSave(i,j)
end if
end if
end do
end do
end if
flag_first_SurfTemp = .false.
end if
! 地形
! Topography
!
if ( present(xy_SurfHeight) ) then
if ( SurfHeightSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfHeight ) then
call HistoryGet( SurfHeightFile, SurfHeightName, xy_SurfHeight, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( SurfHeightSetting == 'generate_internally' ) then
if ( flag_first_SurfHeight ) then
xy_SurfHeight = 0.0_DP
end if
else
call MessageNotify( 'E', module_name, ' SurfHeightSetting = %c is not appropriate.', c1 = trim(SurfHeightSetting) )
end if
flag_first_SurfHeight = .false.
end if
! NOTICE:
! The surface condition and sea ice concentration have to be set, before albedo
! is set.
!
! アルベド
! Albedo
!
if ( present(xy_SurfAlbedo) ) then
if ( flag_first_SurfAlbedo ) then
! 保存用変数の割付
! Allocate a variable for save
!
allocate( xy_SurfAlbedoSave(0:imax-1, 1:jmax) )
end if
if ( AlbedoSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfAlbedo ) then
call HistoryGet( AlbedoFile, AlbedoName, xy_SurfAlbedoSave, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( AlbedoSetting == 'Matthews' ) then
! アルベドを Matthews のデータをもとに設定
! Surface albedo is set based on Matthews' data
!
call SetAlbedoMathews( xy_SurfCond, xy_SurfAlbedoSave )
else if ( AlbedoSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfAlbedo ) then
call SetSurfData( xy_SurfAlbedo = xy_SurfAlbedoSave )
end if
else
call MessageNotify( 'E', module_name, ' AlbedoSetting = %c is not appropriate.', c1 = trim(AlbedoSetting) )
end if
! アルベドの設定
! Setting of albedo
!
xy_SurfAlbedo = xy_SurfAlbedoSave
if ( present( xy_SurfCond ) ) then
! 雪と海氷によるアルベド変化
! modification of surface albedo on the snow covered ground and on the sea ice
!
call ModAlbedoDueToSnowSeaIce( xy_SurfCond, xy_SurfSnowB, xy_SeaIceConc, xy_SurfAlbedo )
else
call MessageNotify( 'E', module_name, ' xy_SurfCond has to be present to modify albedo due to snow and sea ice.' )
end if
flag_first_SurfAlbedo = .false.
end if
! NOTICE:
! The surface condition has to be set, before humidity coefficient is set.
!
! 惑星表面湿潤度
! Surface humidity coefficient
!
if ( present(xy_SurfHumidCoef) ) then
if ( HumidCoefSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfHumidCoef ) then
call HistoryGet( HumidcoefFile, HumidcoefName, xy_SurfHumidcoef, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( HumidCoefSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfHumidCoef ) then
call SetSurfData( xy_SurfHumidCoef = xy_SurfHumidCoef )
end if
else
call MessageNotify( 'E', module_name, ' HumidCoefSetting = %c is not appropriate.', c1 = trim(HumidCoefSetting) )
end if
if ( ( present( xy_SurfCond ) ) .and. ( present( xy_SoilMoistB ) ) .and. ( present( xy_SurfSnowB ) ) ) then
! バケツモデルに関わる地表面湿潤度の設定
! Setting of surface humidity coefficient
!
call BucketModHumidCoef( xy_SurfCond, xy_SoilMoistB, xy_SurfSnowB, xy_SurfHumidCoef )
else
call MessageNotify( 'E', module_name, ' xy_SurfCond and xy_SoilMoistB and Xy_SurfSnowB have to be present to modify humidity coefficient with bucket model.' )
end if
flag_first_SurfHumidCoef = .false.
end if
! 粗度長
! Roughness length
!
if ( present(xy_SurfRoughLength) ) then
if ( RoughLengthSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfRoughLength ) then
call HistoryGet( RoughLengthFile, RoughLengthName, xy_SurfRoughLength, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( RoughLengthSetting == 'LOContrast' ) then
! 粗度長の設定, 陸面と海洋の差のみ考慮
! Set roughness length, only considering land-ocean contrast
!
call SetRoughLenLandOceanContrast( xy_SurfCond, xy_SurfRoughLength )
else if ( RoughLengthSetting == 'Matthews' ) then
! 粗度長の設定, Matthews のデータに基づく
! Set roughness length based on Matthews dataset
!
call SetRoughLenLandMatthews( xy_SurfCond, xy_SurfRoughLength )
else if ( RoughLengthSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfRoughLength ) then
call SetSurfData( xy_SurfRoughLength = xy_SurfRoughLength )
end if
else
call MessageNotify( 'E', module_name, ' RoughLengthSetting = %c is not appropriate.', c1 = trim(RoughLengthSetting) )
end if
flag_first_SurfRoughLength = .false.
end if
! 地表熱容量
! Surface heat capacity
!
if ( present(xy_SurfHeatCapacity) ) then
if ( HeatCapacitySetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_SurfHeatCapacity ) then
call HistoryGet( HeatCapacityFile, HeatCapacityName, xy_SurfHeatCapacity, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( HeatCapacitySetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_SurfHeatCapacity ) then
call SetSurfData( xy_SurfHeatCapacity = xy_SurfHeatCapacity )
end if
else
call MessageNotify( 'E', module_name, ' HeatCapacitySetting = %c is not appropriate.', c1 = trim(HeatCapacitySetting) )
end if
flag_first_SurfHeatCapacity = .false.
end if
! 地中熱フラックス
! Ground temperature flux
!
if ( present(xy_GroundTempFlux) ) then
if ( TempFluxSetting == 'file' ) then
! データをファイルから取得
! Data is input from files
!
if ( flag_first_GroundTempFlux ) then
call HistoryGet( TempFluxFile, TempFluxName, xy_GroundTempFlux, flag_mpi_split = flag_mpi_init ) ! (in) optional
end if
else if ( TempFluxSetting == 'generate_internally' ) then
! データ (デフォルト値) を surface_data モジュールから取得
! Data (default values) is input from "surface_data" module
!
if ( flag_first_GroundTempFlux ) then
call SetSurfData( xy_GroundTempFlux = xy_GroundTempFlux )
end if
else
call MessageNotify( 'E', module_name, ' TempFluxSetting = %c is not appropriate.', c1 = trim(TempFluxSetting) )
end if
flag_first_GroundTempFlux = .false.
end if
! 計算時間計測一時停止
! Pause measurement of computation time
!
call TimesetClockStop( module_name )
end subroutine SetSurfaceProperties