Public Instance methods
albedo_Matthews_nml( flag_annual_mean, OceanAlbedo )
auxiliary_nml( RefPress )
axesset_nml( Sigma, OMPNumThreads, Depth, flag_generate_sigma, LonInDeg, LatInDeg )
| NAMELIST : |
|
| Sigma(1:MaxNmlArySize) : | real(DP), save
| : | $ sigma $ レベル (半整数). Half $ sigma $ level
|
|
| OMPNumThreads : | integer
| : | OpenMP での最大スレッド数. openmp_threads に 1 より大きな値を指定すれば ISPACK
の球面調和函数変換 OpenMP 並列計算 ルーチンが用いられる.
並列計算を実行するには, 実行時に環境変数 OMP_NUM_THREADS を OMPNumThreads
以下の数字に設定する 等のシステムに応じた準備が必要となる.
OMPNumThreads に 1 より大きな値を
指定しなければ並列計算ルーチンは呼ばれない.
|
|
| Depth(1:MaxNmlArySize) : | real(DP), save
| : | 入力用配列, 地下の鉛直層境界 array for input, layer interface of
subsurface vertical layer
|
|
| flag_generate_sigma : | logical
| : | 鉛直層数の内部生成のためのフラグ Flag for generation of sigma levels
internally
|
|
| LonInDeg : | real(DP)
| : | Longitude in unit of degree of a grid point in 1D mode
|
|
| LatInDeg : | real(DP)
| : | Latitude in unit of degree of a grid point in 1D mode
|
|
デフォルト値については初期化手続 "axesset#AxessetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "axesset#AxessetInit" for the default
values.
This namelist group name is input/output in axesset#AxessetInit
bucket_model_nml( FlagBucketModel, SoilMoistCritAmnt, SoilMoistCritAmntforEvapEff, FlagBucketModelSnow )
| NAMELIST : |
|
| FlagBucketModel : | logical, save, public
| : | バケツモデル オン／オフ. bucket model on/off.
|
|
| SoilMoistCritAmnt : | real(DP), save
| : | <Japanese> Critical amount of soil moisture
|
|
| SoilMoistCritAmntforEvapEff : | real(DP), save
| : | <Japanese> Critical amount of soil moisture for evaporation
efficiency
|
|
| FlagBucketModelSnow : | logical, save, public
| : | バケツモデル 雪の扱い オン／オフ. bucket model treatment of snow on/off.
|
|
実行文 ; Executable statement
This namelist group name is input/output in Bucket_Model#BucketInit
check_prog_vars_nml( VelMin, VelMax, TempMin, TempMax )
co2_phase_change_nml( FlagUse )
composition_nml( ncmax, Names, LongNames, FlagAdv )
constants_nml( RPlanet, Omega, Grav, MolWtDry, CpDry, MolWtWet, CpWet, LatentHeat )
| NAMELIST : |
|
| RPlanet : | real(DP), save, public
| : | $ a $ [m]. 惑星半径. Radius of planet
|
|
| Omega : | real(DP), save, public
| : | $ Omega $ [s-1]. 回転角速度. Angular velocity
|
|
| Grav : | real(DP), save, public
| : | $ g $ [m s-2]. 重力加速度. Gravitational acceleration
|
|
| MolWtDry : | real(DP), save, public
| : | $ M $ [kg mol-1]. 乾燥大気の平均分子量. Mean molecular weight of dry air
|
|
| CpDry : | real(DP), save, public
| : | $ C_p $ [J kg-1 K-1]. 乾燥大気の定圧比熱. Specific heat of air at constant
pressure
|
|
| MolWtWet : | real(DP), save, public
| : | $ M_v $ [kg mol-1]. 凝結成分の平均分子量. Mean molecular weight of
condensible elements
|
|
| CpWet : | real(DP), save, public
| : | $ C_v $ [J kg-1 K-1] . 凝結成分の定圧比熱. Specific heat of condensible
elements at constant pressure
|
|
| LatentHeat : | real(DP), save, public
| : | $ L $ [J kg-1] . 凝結の潜熱. Latent heat of condensation
|
|
デフォルト値については初期化手続 "constants#ConstantsInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "constants#ConstantsInit" for the
default values.
This namelist group name is input/output in constants#ConstantsInit
constants_snowseaice_nml( ThresholdSurfSnow , SnowAlbedo , TempCondWater , SeaIceVolHeatCap , SeaIceThermCondCoef, SeaIceThreshold , SeaIceThickness , TempBelowSeaIce , SeaIceAlbedo )
| NAMELIST : |
|
| ThresholdSurfSnow : | real(DP), public, save
|
| SnowAlbedo : | real(DP), public, save
|
| TempCondWater : | real(DP), public, save
| : | <Japanese> Condensation temperature of water
|
|
| SeaIceVolHeatCap : | real(DP), public, save
| : | Volumetric heat capacity of sea ice (J m-3 K-1)
|
|
| SeaIceThermCondCoef : | real(DP), public, save
| : | Thermal conductivity of sea ice (W m-1 K-1)
|
|
| SeaIceThreshold : | real(DP), public, save
|
| SeaIceThickness : | real(DP), public, save
|
| TempBelowSeaIce : | real(DP), public, save
|
| SeaIceAlbedo : | real(DP), public, save
|
デフォルト値については初期化手続 "constants#ConstantsInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "constants#ConstantsInit" for the
default values.
This namelist group name is input/output in constants_snowseaice#ConstantsSnowSeaIceInit
cumulus_adjust_nml( CrtlRH, ItrtMax, TempSatMax )
dcpam_main_nml( DynMode, PhysMode, RadModel, PhysImpMode, FlagVerticalFilter )
| NAMELIST : |
|
| DynMode : | character(STRING)
| : | Dynamics used in calculation
|
|
| PhysMode : | character(STRING)
| : | Physics used in calculation
|
|
| RadModel : | character(STRING)
| : | Radiation model used in calculation
|
|
| PhysImpMode : | character(STRING)
| : | Mode for implicit method used in calculation
|
|
デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"main/dcpam_main.F90#MainInit" for the default values.
This namelist group name is input/output in main/dcpam_main.f90#MainInit
dcpam_main_nml( DynMode, PhysMode, RadModel, PhysImpMode, FlagVerticalFilter )
| NAMELIST : |
|
| DynMode : | character(STRING)
| : | Dynamics used in calculation
|
|
| PhysMode : | character(STRING)
| : | Physics used in calculation
|
|
| RadModel : | character(STRING)
| : | Radiation model used in calculation
|
|
| PhysImpMode : | character(STRING)
| : | Mode for implicit method used in calculation
|
|
| FlagVerticalFilter : | logical
| : | flag for use of vertical filter
|
|
デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"main/dcpam_main.F90#MainInit" for the default values.
This namelist group name is input/output in main/dcpam_main.f90#dcpam_main
dry_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion, FlagUse )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| AdjustCriterion(1:MaxNmlArySize) : | real(DP), save
| : | 調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of
adjustment (temperature difference equivalent to difference of dry static
energy)
|
|
| FlagUse : | logical, save
| : | 使用フラグ flag for use of this scheme
|
|
デフォルト値については初期化手続 "dry_conv_adjust#DryConvAdjustInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "dry_conv_adjust#DryConvAdjustInit"
for the default values.
This namelist group name is input/output in dry_conv_adjust#DryConvAdjustInit
dryconv_adjust_nml( ItrtMax, TempSatMax, flag_dryconv_adjust )
dynamics_hspl_vas83_nml( TimeIntegScheme, HDOrder, HDEFoldTimeValue, HDEFoldTimeUnit, FlagSpongeLayer, FlagSpongeLayerforZonalMean, FlagSpongeLayerforHeat, SLEFoldTimeValue, SLEFoldTimeUnit, SLOrder, SLNumLayer, RefTemp, FlagDivDamp, DivDampPeriodValue, DivDampPeriodUnit, FlagMassFixer, FlagMassHorDifCor )
| NAMELIST : |
|
| TimeIntegScheme : | character(TOKEN)
| : | 時間積分法. 以下の方法を選択可能.
Time integration scheme. Available schemes are as follows.
- "Semi-implicit"
- "Explicit"
|
|
| HDOrder : | integer
| : | 超粘性の次数. Order of hyper-viscosity
|
|
| HDEFoldTimeValue : | real(DP)
| : | 最大波数に対する e-folding time. 負の値を与えると,
水平拡散係数をゼロにします.
E-folding time for maximum wavenumber. If negative value is given,
coefficients of horizontal diffusion become zero.
|
|
| HDEFoldTimeUnit : | character(TOKEN)
| : | 最大波数に対する e-folding time の単位. Unit of e-folding time for maximum
wavenumber
|
|
| FlagSpongeLayer : | logical
|
| FlagSpongeLayerforZonalMean : | logical
|
| FlagSpongeLayerforHeat : | logical
|
| SLEFoldTimeValue : | real(DP)
| : | スポンジ層の最上層における減衰時定数 Damping time constant at the top
model layer in a sponge layer
|
|
| SLEFoldTimeUnit : | character(TOKEN)
| : | SLEFoldTimeValue の単位 Unit of SLEFoldTimeValue
|
|
| SLOrder : | integer
| : | スポンジ層の減衰係数の sigma 依存性のオーダ Sigma dependence of damping
coefficient in a sponge layer
|
|
| SLNumLayer : | integer
| : | スポンジ層が適応されるモデル上端からの層の数 Number of layers which the
sponge layer is applied.
|
|
| RefTemp : | real(DP)
| : | $ overline{T} $ . 基準温度. Reference temperature
|
|
| FlagDivDamp : | logical , save
| : | Flag for divergence damping
|
|
| DivDampPeriodValue : | real(DP)
| : | Period for divergence damping application
|
|
| DivDampPeriodUnit : | character(TOKEN)
| : | Unit of DivDampPeriodValue
|
|
| FlagMassFixer : | logical , save
|
| FlagMassHorDifCor : | logical , save
| : | Flag for correction of horizontal diffusion of mass
|
|
デフォルト値については初期化手続 "dynamics_hspl_vas83#DynamicsInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "dynamics_hspl_vas83#DynamicsInit"
for the default values.
This namelist group name is input/output in dynamics_hspl_vas83#DynamicsInit
fileset_nml( FileTitle, FileSource, FileInstitution )
| NAMELIST : |
|
| FileTitle : | character(STRING), save, public
| : | 出力データファイルの表題. Title of output data files
|
|
| FileSource : | character(STRING), save, public
| : | データファイル作成の手段. Source of data file
|
|
| FileInstitution : | character(STRING), save, public
| : | データファイルを最終的に変更した組織/個人. Institution or person that
changes data files for the last time
|
|
デフォルト値については初期化手続 "fileset#FilesetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "fileset#FilesetInit" for the default
values.
This namelist group name is input/output in fileset#FilesetInit
gridset_nml( nmax, imax, jmax_global, jmax, kmax, kslmax )
| NAMELIST : |
|
| nmax : | integer, save, public
| : | 最大全波数. Maximum truncated wavenumber
|
|
| imax : | integer, save, public
| : | 経度格子点数. Number of grid points in longitude
|
|
| jmax_global : | integer, save, public
| : | 緯度格子点数 (全球). Number of grid points in latitude on whole globe
|
|
| jmax : | integer, save, public
| : | 緯度格子点数. Number of grid points in latitude
|
|
| kmax : | integer, save, public
| : | 鉛直層数. Number of vertical level
|
|
| kslmax : | integer, save, public
| : | 地下の鉛直層数. Number of subsurface vertical level
|
|
デフォルト値については初期化手続 "gridset#GridsetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "gridset#GridsetInit" for the default
values.
This namelist group name is input/output in gridset#GridsetInit
held_suarez_1994_nml( SigmaB, kfTimeScaleInDay, kaTimeScaleInDay, ksTimeScaleInDay )
initial_data_nml( Pattern, TempAvr, PsAvr, QVapAvr, Ueq )
| NAMELIST : |
|
| Pattern : | character(STRING), save, public
| : | 初期値データのパターン. 以下のパターンを選択可能.
Initial data pattern Available patterns are as follows.
- "Small Disturbance of Temperature" (default value)
- "AGCM 5.3 Default"
- "Sugiyama et al. (2008)"
|
|
| TempAvr : | real(DP), save, public
| : | $ bar{T} $ . 温度平均値. Mean temperature
|
|
| PsAvr : | real(DP), save, public
| : | $ bar{p_s} $ . 地表面気圧平均値. Mean surface pressure
|
|
| QVapAvr : | real(DP), save, public
| : | $ bar{q} $ . 比湿平均値. Mean specific humidity
|
|
| Ueq : | real(DP), save, public
| : | $ u_{eq} $ . 赤道上の東西風速. Eastward wind on the equator
|
|
デフォルト値については初期化手続 "initial_data#InitDataInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "initial_data#InitDataInit" for
the default values.
This namelist group name is input/output in initial_data#InitDataInit
lscond_nml( CrtlRH, ItrtMax, FlagUse )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| FlagUse : | logical, save
| : | 使用フラグ flag for use of this scheme
|
|
デフォルト値については初期化手続 "lscond#LSCondInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "lscond#LSCondInit" for the default
values.
This namelist group name is input/output in lscond#LSCondInit
moist_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion, FlagUse )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| AdjustCriterion(1:MaxNmlArySize) : | real(DP), save
| : | 調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of
adjustment (temperature difference equivalent to difference of moist static
energy)
|
|
| FlagUse : | logical, save
| : | 使用フラグ flag for use of this scheme
|
|
デフォルト値については初期化手続 "moist_conv_adjust#CumAdjInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "moist_conv_adjust#MoistConvAdjustInit"
for the default values.
This namelist group name is input/output in moist_conv_adjust#MoistConvAdjustInit
phy_implicit_sdh_nml( SOHeatCapacity )
rad_DennouAGCM_nml( SolarConst, DelTimeLongValue, DelTimeLongUnit, DelTimeShortValue, DelTimeShortUnit, LongBandNum, LongAbsorpCoefQVap, LongAbsorpCoefDryAir, LongBandWeight, LongPathLengthFact, ShortBandNum, ShortAbsorpCoefQVap, ShortAbsorpCoefDryAir, ShortBandWeight, ShortSecScat, ShortAtmosAlbedo, RstInputFile, RstOutputFile )
| NAMELIST : |
|
| SolarConst : | real(DP), save
|
| DelTimeLongValue : | real(DP), save
| : | 長波フラックスを計算する時間間隔の数値. Value of interval step of long
wave flux calculation
|
|
| DelTimeLongUnit : | character(STRING), save
| : | 長波フラックスを計算する時間間隔の単位. Unit of interval step of long wave
flux calculation
|
|
| DelTimeShortValue : | real(DP), save
| : | 短波 (日射) フラックスを計算する時間間隔の数値. Value of interval step of
short wave (insolation) flux calculation
|
|
| DelTimeShortUnit : | character(STRING), save
| : | 短波 (日射) フラックスを計算する時間間隔の単位. Unit of interval step of
short wave (insolation) flux calculation
|
|
| LongBandNum : | integer, save
| : | 長波バンド数. Number of long wave band
|
|
| LongAbsorpCoefQVap(1:MaxNmlArySize) : | real(DP), save
| : | $ k_R $ . 水の吸収係数. Absorption coefficient of water.
|
|
| LongAbsorpCoefDryAir(1:MaxNmlArySize) : | real(DP), save
| : | $ bar{k}_R $ . 空気の吸収係数. Absorption coefficient of air.
|
|
| LongBandWeight(1:MaxNmlArySize) : | real(DP), save
|
| LongPathLengthFact : | real(DP), save
| : | 光路長のファクタ. Factor of optical length
|
|
| ShortBandNum : | integer, save
| : | 短波バンド数. Number of short wave band
|
|
| ShortAbsorpCoefQVap(1:MaxNmlArySize) : | real(DP), save
| : | $ k_S $ . 水の吸収係数. Absorption coefficient of water.
|
|
| ShortAbsorpCoefDryAir(1:MaxNmlArySize) : | real(DP), save
| : | $ bar{k}_S $ . 空気の吸収係数. Absorption coefficient of air.
|
|
| ShortBandWeight(1:MaxNmlArySize) : | real(DP), save
|
| ShortSecScat : | real(DP), save
| : | 散乱の $ sec zeta $ . $ sec zeta $ of scattering
|
|
| ShortAtmosAlbedo : | real(DP), save
|
| RstInputFile : | character(STRING)
| : | 入力するリスタートデータのファイル名 Filename of input restart data
|
|
| RstOutputFile : | character(STRING)
| : | 出力するリスタートデータのファイル名 Filename of output restart data
|
|
デフォルト値については初期化手続 "rad_DennouAGCM#RadInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_DennouAGCM#RadInit" for the default values.
This namelist group name is input/output in
rad_DennouAGCM#RadInit
rad_SL09_nml( SWOptDepAtRefPress, SWRefPress, SWOrd, LWOptDepAtRefPress, LWRefPress, LWOrd, SolarConst )
| NAMELIST : |
|
| SWOptDepAtRefPress : | real(DP), save
|
| SWRefPress : | real(DP), save
|
| SWOrd : | real(DP), save
|
| LWOptDepAtRefPress : | real(DP), save
|
| LWRefPress : | real(DP), save
|
| LWOrd : | real(DP), save
|
| SolarConst : | real(DP), save
|
デフォルト値については初期化手続 "rad_SL09#RadSL09Init"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_SL09#RadSL09Init" for the default values.
This namelist group name is input/output in
rad_SL09#RadSL09Init
rad_dcpam_EV2_nml( VMRCO2 )
| NAMELIST : |
|
| VMRCO2 : | real(DP), save
| : | Volume mixing ratio of CO2
|
|
!$ & SWVer, LWVer
デフォルト値については初期化手続 "rad_dcpam_EV2#RadDcpamEV2Init"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_dcpam_EV2#RadDcpamEV2Init" for the default values.
This namelist group name is input/output in
rad_dcpam_E_V2#RadDcpamEV2Init
rad_dcpam_E_LW_V2_3_nml( FlagHighAlt, CloudWatREff, CloudIceREff, DelTimeCalcTransValue, DelTimeCalcTransUnit, flag_save_time )
| NAMELIST : |
|
| FlagHighAlt : | logical , save
|
| CloudWatREff : | real(DP), save
|
| CloudIceREff : | real(DP), save
|
| DelTimeCalcTransValue : | real(DP)
|
| DelTimeCalcTransUnit : | character(STRING)
|
| flag_save_time : | logical , save
|
This namelist group name is input/output in
rad_dcpam_E_LW_V2_3#RadDcpamELWV23Init
rad_dcpam_E_SW_V2_1_nml( FlagRayleighScattering, SolarConst, CloudWatREff, CloudIceREff )
| NAMELIST : |
|
| FlagRayleighScattering : | logical , save
|
| SolarConst : | real(DP), save
|
| CloudWatREff : | real(DP), save
|
| CloudIceREff : | real(DP), save
|
デフォルト値については初期化手続
"rad_dcpam_SWEV21#RadDcpamSWEV21Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_dcpam_SWEV21#RadDcpamSWEV21Init" for the default values.
This namelist group name is input/output in
rad_dcpam_E_SW_V2_1#RadDcpamESWV21Init
rad_dcpam_M_15m_nml( rad15mkg_fn, rad15mint )
| NAMELIST : |
|
| rad15mkg_fn : | character(STRING)
|
| rad15mint : | real(DP) , save
|
実行文 ; Executable statement
This namelist group name is input/output in
rad_dcpam_M_15m#rad15m_init
rad_dcpam_M_NIR_nml( FlagUse )
rad_dcpam_M_V1_nml( SolarConst, DOD067, DustVerDistCoef )
| NAMELIST : |
|
| SolarConst : | real(DP), save
| : | Solar radiation at the distance of semi-major axis
|
|
| DOD067 : | real(DP), save
| : | Dust optical depth at 0.67 micron.
|
|
| DustVerDistCoef : | real(DP), save
|
デフォルト値については初期化手続
"rad_dcpam_SWEV1#RadDcpamSWEV1Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_dcpam_SWEV1#RadDcpamSWEV1Init" for the default values.
This namelist group name is input/output in
rad_dcpam_M_V1#RadDcpamMV1Init
rad_short_income_nml( FlagRadSynchronous, FlagAnnualMean, FlagDiurnalMean, FlagPerpetual, PerpDelDeg, PerpDistFromStarScld, EpsOrb, PerLonFromVE, LonFromVEAtEpoch, Eccentricity, TimeAtEpoch, EpochYear, EpochMonth, EpochDay, EpochHour, EpochMin, EpochSec, MaxItrEccAnomaly, ThreEccAnomalyError, IncomAIns, IncomBIns, IncomAZet, IncomBZet )
| NAMELIST : |
|
| FlagRadSynchronous : | logical
| : | 同期回転日射のフラグ Flag for synchronous rotation
|
|
| FlagAnnualMean : | logical, save
| : | 年平均入射フラグ. Flag for annual mean incoming radiation.
|
|
| FlagDiurnalMean : | logical, save
| : | 日平均入射フラグ. Flag for diurnal mean incoming radiation.
|
|
| FlagPerpetual : | logical, save
| : | 季節変化なし入射フラグ. Flag for perpetual incoming radiation.
|
|
| PerpDelDeg : | real(DP)
| : | Declination angle in degree used for perpetual experiment
|
|
| PerpDistFromStarScld : | real(DP), save
| : | distance between a planet and a central star for perpetual experiment
|
|
| EpsOrb : | real(DP), save
| : | 赤道傾斜角. Inclination of equator to orbit.
|
|
| PerLonFromVE : | real(DP), save
| : | 春分から測った近日点の経度 (近日点黄経) (degree) Longitude of the
perihelion from vernal equinox (degree)
|
|
| LonFromVEAtEpoch : | real(DP), save
| : | 元期における惑星の経度 (黄経) (degree) Longitude of the planet at epoch
(degree)
|
|
| Eccentricity : | real(DP), save
|
| TimeAtEpoch : | real(DP), save
| : | 元期における時刻 (sec) Time at epoch (sec)
|
|
| EpochYear : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochMonth : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochDay : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochHour : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochMin : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochSec : | real(DP)
| : | 元期日時 (秒). "TimeAtEpoch" が負の場合にこちらが使用される.
Date at epoch (second) These are used when "TimeAtEpoch" is
negative.
|
|
| MaxItrEccAnomaly : | integer, save
| : | 離心近点角を計算する時の最大繰り返し回数. Maximum iteration number of
times to calculate eccentric anomaly.
|
|
| ThreEccAnomalyError : | real(DP), save
| : | 離心近点角を計算する時の誤差の許容しきい値. Threshold of error to
calculate eccentric anomaly.
|
|
| IncomAIns : | real(DP), save
| : | $ A_{ins} $ . 年平均入射の係数. Coefficient of annual mean incoming
radiation.
|
|
| IncomBIns : | real(DP), save
| : | $ B_{ins} $ . 年平均入射の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
| IncomAZet : | real(DP), save
| : | $ A_{zeta} $ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
| IncomBZet : | real(DP), save
| : | $ B_{zeta} $ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
デフォルト値については初期化手続 "rad_short_income#ShtIncomeInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "rad_short_income#ShtIncomeInit"
for the default values.
This namelist group name is input/output in rad_short_income#ShtIncomeInit
rad_utils_nml( DiffFact )
!$ & DelTimeLongValue, DelTimeLongUnit, & !$ &
DelTimeShortValue, DelTimeShortUnit, & !$! !$ & LongBandNum, &
!$ & LongAbsorpCoefQVap, LongAbsorpCoefDryAir, & !$ &
LongBandWeight, LongPathLengthFact, & !$! !$ & ShortBandNum, &
!$ & ShortAbsorpCoefQVap, ShortAbsorpCoefDryAir, & !$ &
ShortBandWeight, ShortSecScat, & !$ & ShortAtmosAlbedo, & !$!
!$ & RstInputFile, RstOutputFile
デフォルト値については初期化手続 "rad_utils#RadInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "rad_utils#RadInit" for the default
values.
This namelist group name is input/output in rad_utils#RadInit
restart_file_io_nml( InputFile, OutputFile, IntValue, IntUnit )
| NAMELIST : |
|
| InputFile : | character(STRING), save, public
| : | 入力するリスタートデータのファイル名 Filename of input restart data
|
|
| OutputFile : | character(STRING), save, public
| : | 出力するリスタートデータのファイル名 Filename of output restart data
|
|
| IntValue : | real(DP), save, public
| : | リスタートデータの出力間隔 (数値). Interval of restart data output
(numerical value)
|
|
| IntUnit : | character(TOKEN), save, public
| : | リスタートデータの出力間隔 (単位). Interval of restart data output (unit)
|
|
デフォルト値については初期化手続 "restart_file_io#RestartFileInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "restart_file_io#RestartFileInit"
for the default values.
This namelist group name is input/output in restart_file_io#RestartFileInit
restart_surftemp_io_nml( InputFile, InputName, OutputFile, IntValue, IntUnit )
| NAMELIST : |
|
| InputFile : | character(STRING), save
| : | 入力するリスタートデータのファイル名 Filename of input restart data
|
|
| InputName : | character(TOKEN), save
| : | 入力するリスタートデータの変数名 Variable name of input restart data
|
|
| OutputFile : | character(STRING), save
| : | 出力するリスタートデータのファイル名 Filename of output restart data
|
|
| IntValue : | real(DP), save
| : | リスタートデータの出力間隔. Interval of restart data output
|
|
| IntUnit : | character(TOKEN)
| : | リスタートデータの出力間隔の単位. Unit for interval of restart data output
|
|
デフォルト値については初期化手続 "restart_surftemp_io#RestartSurfTempInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "restart_surftemp_io#RestartSurfTempInit"
for the default values.
This namelist group name is input/output in restart_surftemp_io#RestartSurfTempInit
set_1d_profile_nml( InFileName )
set_O3_nml( FlagO3, Flag1D, O3File )
set_cloud_nml( FlagCloud, CloudLifeTime, CloudCover )
| NAMELIST : |
|
| FlagCloud : | logical , save
| : | A flag for cloud set. If FlagCloud is true, the effect of cloud is
considered. It should be noticed that in principle
|
|
| CloudLifeTime : | real(DP), save
|
| CloudCover : | real(DP), save
|
デフォルト値については初期化手続 "set_cloud#setCloudInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "set_cloud#SetCloudInit" for the
default values.
This namelist group name is input/output in set_cloud#SetCloudInit
sl09_diffusion_nml( SigmaB, kfTimeScaleInDay, FrictionLBLat, LBHeatFlux )
surface_data_nml( Pattern, SurfTemp, Albedo, HumidCoef, RoughLength, HeatCapacity, TempFlux, SurfCond, SeaIceConc, SoilHeatCap, SoilHeatDiffCoef )
| NAMELIST : |
|
| Pattern : | character(STRING), save
| : | 地表面データのパターン. 以下のパターンを選択可能.
Surface data pattern. Available patterns are as follows.
- "Hosaka et al. (1998)"
- "Homogeneous"
|
|
| SurfTemp : | real(DP), save
| : | 地表面温度の基準値. Standard value of surface temperature
|
|
| Albedo : | real(DP), save
|
| HumidCoef : | real(DP), save
| : | 地表湿潤度. Surface humidity coefficient
|
|
| RoughLength : | real(DP), save
| : | 地表粗度長. Surface rough length
|
|
| HeatCapacity : | real(DP), save
| : | 地表熱容量. Surface heat capacity
|
|
| TempFlux : | real(DP), save
| : | 地中熱フラックス. Ground temperature flux
|
|
| SurfCond : | integer, save
| : | 地表状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)
|
|
| SeaIceConc : | real(DP), save
| : | 海氷面密度 Sea ice concentration
|
|
| SoilHeatCap : | real(DP), save
| : | 土壌熱容量 (J K-1 kg-1) Specific heat of soil (J K-1 kg-1)
|
|
| SoilHeatDiffCoef : | real(DP), save
| : | 土壌熱伝導係数 (J m-3 K-1) Heat conduction coefficient of soil (J m-3 K-1)
|
|
デフォルト値については初期化手続 "surface_data#SurfDataInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_data#SurfDataInit" for
the default values.
This namelist group name is input/output in surface_data#SurfDataInit
surface_flux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, VelMaxForVel, VelMaxForTemp, VelMaxForQVap, VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax, FlagFixFricTimeConstAtLB, FricTimeConstAtLB, LowLatFricAtLB, FlagFixHeatFluxAtLB, HeatFluxAtLB, FlagFixMassFluxAtLB, MassFluxAtLB )
| NAMELIST : |
|
| FlagConstBulkCoef : | logical, save
| : | Flag for using constant bulk coefficient
|
|
| FlagUseOfBulkCoefInNeutralCond : | logical, save
| : | Flag for using bulk coefficient in neutral condition
|
|
| ConstBulkCoef : | real(DP), save
| : | バルク係数一定値. Steady value of bulk coefficient
|
|
| VelMinForRi : | real(DP), save
| : | $ R_i $ 数用風最小値. Minimum value of velocity for $ R_i $ number
|
|
| VelMinForVel : | real(DP), save
| : | 運動量用風最小値. Minimum value of velocity for momentum
|
|
| VelMinForTemp : | real(DP), save
| : | 熱用風最小値. Minimum value of velocity for thermal
|
|
| VelMinForQVap : | real(DP), save
| : | 水蒸気用風最小値. Minimum value of velocity for vapor
|
|
| VelMaxForVel : | real(DP), save
| : | 運動量用風最大値. Maximum value of velocity for momentum
|
|
| VelMaxForTemp : | real(DP), save
| : | 熱用風最大値. Maximum value of velocity for thermal
|
|
| VelMaxForQVap : | real(DP), save
| : | 水蒸気用風最大値. Maximum value of velocity for vapor
|
|
| VelBulkCoefMin : | real(DP), save
| : | $ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient
|
|
| TempBulkCoefMin : | real(DP), save
| : | $ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient
|
|
| QVapBulkCoefMin : | real(DP), save
| : | $ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient
|
|
| VelBulkCoefMax : | real(DP), save
| : | $ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient
|
|
| TempBulkCoefMax : | real(DP), save
| : | $ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient
|
|
| QVapBulkCoefMax : | real(DP), save
| : | $ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient
|
|
| FlagFixFricTimeConstAtLB : | logical , save
|
| FricTimeConstAtLB : | real(DP), save
| : | 下部境界摩擦の時定数 (s). Time constant of surface friction (s).
|
|
| LowLatFricAtLB : | real(DP), save
| : | 下部境界摩擦が働く最低緯度 (degree). Lowest latitude where the friction is
applied (degree)
|
|
| FlagFixHeatFluxAtLB : | logical , save
|
| HeatFluxAtLB : | real(DP), save
| : | 下部境界での熱フラックス (W m-2). Heat flux at the lower boundary (W m-2).
|
|
| FlagFixMassFluxAtLB : | logical , save
|
| MassFluxAtLB : | real(DP), save
| : | 下部境界での質量フラックス (W m-2).
実際にはゼロに固定するために使う程度にしか使えないだろう. Mass flux at the
lower boundary (kg m-2 s-1).
|
|
デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_flux_bulk#SurfFluxInit"
for the default values.
This namelist group name is input/output in surface_flux_bulk#SurfFluxInit
surface_properties_nml( SurfTempSetting, SurfTempFile, SurfTempName, SeaIceSetting, SeaIceFile, SeaIceName, AlbedoSetting, AlbedoFile, AlbedoName, HumidCoefSetting, HumidCoefFile, HumidCoefName, RoughLengthSetting, RoughLengthFile, RoughLengthName, HeatCapacitySetting, HeatCapacityFile, HeatCapacityName, TempFluxSetting, TempFluxFile, TempFluxName, SurfCondSetting, SurfCondFile, SurfCondName, SurfHeightSetting, SurfHeightFile, SurfHeightName, SoilHeatCapSetting, SoilHeatCapFile, SoilHeatCapName, SoilHeatDiffCoefSetting, SoilHeatDiffCoefFile, SoilHeatDiffCoefName )
| NAMELIST : |
|
| SurfTempSetting : | character(STRING), save
| : | 地表面温度の設定方法 Setting of surface temperature
|
|
| SurfTempFile : | character(STRING), save
| : | 地表面温度のファイル名. File name of surface temperature
|
|
| SurfTempName : | character(TOKEN) , save
| : | 地表面温度の変数名. Variable name of surface temperature
|
|
| SeaIceSetting : | character(STRING), save
| : | 海氷面密度の設定方法 Setting of sea ice concentration
|
|
| SeaIceFile : | character(STRING), save
| : | 海氷面密度のファイル名. File name of sea ice concentration
|
|
| SeaIceName : | character(TOKEN) , save
| : | 海氷面密度の変数名. Variable name of sea ice concentration
|
|
| AlbedoSetting : | character(STRING), save
| : | 地表アルベドの設定方法 Settingof surface albedo
|
|
| AlbedoFile : | character(STRING), save
| : | 地表アルベドのファイル名. File name of surface albedo
|
|
| AlbedoName : | character(TOKEN) , save
| : | 地表アルベドの変数名. Variable name of surface albedo
|
|
| HumidCoefSetting : | character(STRING), save
| : | 地表湿潤度の設定方法 Setting of surface humidity coefficient
|
|
| HumidCoefFile : | character(STRING), save
| : | 地表湿潤度のファイル名. File name of surface humidity coefficient
|
|
| HumidCoefName : | character(TOKEN) , save
| : | 地表湿潤度の変数名. Variable name of surface humidity coefficient
|
|
| RoughLengthSetting : | character(STRING), save
| : | 地表粗度長の設定方法 Setting of surface rough length
|
|
| RoughLengthFile : | character(STRING), save
| : | 地表粗度長のファイル名. File name of surface rough length
|
|
| RoughLengthName : | character(TOKEN) , save
| : | 地表粗度長の変数名. Variable name of surface rough length
|
|
| HeatCapacitySetting : | character(STRING), save
| : | 地表熱容量の設定方法 Setting of surface heat capacity
|
|
| HeatCapacityFile : | character(STRING), save
| : | 地表熱容量のファイル名. File name of surface heat capacity
|
|
| HeatCapacityName : | character(TOKEN) , save
| : | 地表熱容量の変数名. Variable name of surface heat capacity
|
|
| TempFluxSetting : | character(STRING), save
| : | 地中熱フラックスの設定方法 Setting of ground temperature flux
|
|
| TempFluxFile : | character(STRING), save
| : | 地中熱フラックスのファイル名. File name of ground temperature flux
|
|
| TempFluxName : | character(TOKEN) , save
| : | 地中熱フラックスの変数名. Variable name of ground temperature flux
|
|
| SurfCondSetting : | character(STRING), save
| : | 地表状態の設定方法 Setting of surface condition
|
|
| SurfCondFile : | character(STRING), save
| : | 地表状態のファイル名. File name of surface condition
|
|
| SurfCondName : | character(TOKEN) , save
| : | 地表状態の変数名. Variable name of surface condition
|
|
| SurfHeightSetting : | character(STRING), save
| : | 地表面高度の設定方法 Setting of surface height
|
|
| SurfHeightFile : | character(STRING), save
| : | 地表面高度のファイル名. File name of surface height
|
|
| SurfHeightName : | character(TOKEN) , save
| : | 地表面高度の変数名. Variable name of surface height
|
|
| SoilHeatCapSetting : | character(STRING), save
| : | 土壌熱容量の設定方法 Setting of heat conduction coefficient of soil
|
|
| SoilHeatCapFile : | character(STRING), save
| : | 土壌熱容量のファイル名. File name of heat conduction coefficient of soil
|
|
| SoilHeatCapName : | character(TOKEN) , save
| : | 土壌熱容量の変数名. Variable name of heat conduction coefficient of soil
|
|
| SoilHeatDiffCoefSetting : | character(STRING), save
| : | 土壌熱伝導係数の設定方法 Setting of heat conduction coefficient of soil
|
|
| SoilHeatDiffCoefFile : | character(STRING), save
| : | 土壌熱伝導係数のファイル名. File name of heat conduction coefficient of
soil
|
|
| SoilHeatDiffCoefName : | character(TOKEN) , save
| : | 土壌熱伝導係数の変数名. Variable name of heat conduction coefficient of
soil
|
|
デフォルト値については初期化手続 "surface_properties#SurfacePropertiesInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_properties#SurfacePropertiesInit"
for the default values.
This namelist group name is input/output in surface_properties#SurfacePropertiesInit
timefilter_asselin1972_nml( FilterParameter )
| NAMELIST : |
|
| FilterParameter : | real(DP), save
| : | タイムフィルターの係数. Time filter coefficient
| !$ integer, save: | IntStep ! タイムフィルターを適用するステップ間隔.
|
!$ ! Step interval of time filter application
| !$ integer, save: | CurStep ! TimeFilter が呼ばれた回数.
|
!$ ! Number of times that "TimeFilter" is called
| !$ integer, save: | PrevStep ! 前回タイムフィルターを適用したステップ数.
|
!$ ! Step number that is filtered previously
|
|
, IntStep
デフォルト値については初期化手続
"timefilter_asselin1972#Hs94Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"timefilter_asselin1972#Hs94Init" for the default values.
This namelist group name is input/output in timefilter_asselin1972#TimeFiltInit
timeset_nml( cal_type, month_in_year, day_in_month, hour_in_day, min_in_hour, sec_in_min, DelTimeValue, DelTimeUnit, RestartTimeValue, RestartTimeUnit, InitialYear, InitialMonth, InitialDay, InitialHour, InitialMin, InitialSec, EndYear, EndMonth, EndDay, EndHour, EndMin, EndSec, IntegPeriodValue, IntegPeriodUnit, PredictIntValue, PredictIntUnit, CpuTimeMoniter )
| NAMELIST : |
|
| cal_type : | character(TOKEN), save
| : | 暦情報. Type of calendar used for an experiment
|
|
| month_in_year : | integer , save
| : | Number of months in a year which is used when cal_type =
"user_defined"
|
|
| day_in_month(1:MaxNmlArySize) : | integer , save
| : | Number of days in a month which is used when cal_type =
"user_defined"
|
|
| hour_in_day : | integer , save
| : | Number of hours in a day which is used when cal_type =
"user_defined"
|
|
| min_in_hour : | integer , save
| : | Number of minutes in a hour which is used when cal_type =
"user_defined"
|
|
| sec_in_min : | real(DP) , save
| : | Number of seconds in a minute which is used when cal_type =
"user_defined"
|
|
| DelTimeValue : | real(DP) , save
| : | $ Delta t $ . 単位は DelTimeUnit にて指定. Unit is specified by
"DelTimeUnit".
|
|
| DelTimeUnit : | character(TOKEN), save
| : | $ Delta t $ の単位. Unit of $ Delta t $
|
|
| RestartTimeValue : | real(DP) , save
| : | リスタート開始時刻. Restart time of calculation
|
|
| RestartTimeUnit : | character(TOKEN), save
| : | リスタート開始時刻の単位. Unit of restart time of calculation
|
|
| InitialYear : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialMonth : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialDay : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialHour : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialMin : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialSec : | real(DP)
| : | 計算開始日時 (秒) Start date of calculation (second)
|
|
| EndYear : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndMonth : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndDay : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndHour : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndMin : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndSec : | real(DP)
| : | 計算終了日時 (秒). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (second) These are used when
"IntegPeriodValue" is negative
|
|
| IntegPeriodValue : | real(DP)
|
| IntegPeriodUnit : | character(TOKEN)
| : | "IntegPeriodValue" の単位. Unit of "IntegPeriodValue".
|
|
| PredictIntValue : | real(DP) , save
| : | 終了予測日時表示間隔. Interval of predicted end time output
|
|
| PredictIntUnit : | character(TOKEN), save
| : | 終了予測日時表示間隔 (単位). Unit for interval of predicted end time
output
|
|
| CpuTimeMoniter : | logical , save
| : | CPU 時間計測のオンオフ On/off of CPU time monitoring
|
|
デフォルト値については初期化手続 "timeset#TimesetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "timeset#TimesetInit" for the default
values.
This namelist group name is input/output in timeset#TimesetInit
vdiffusion_my1974_nml( FlagConstDiffCoef, ConstDiffCoefM, ConstDiffCoefH, SquareVelMin, BulkRiNumMin, MixLengthMax, TildeShMin, TildeSmMin, VelDiffCoefMin, TempDiffCoefMin, QMixDiffCoefMin, VelDiffCoefMax, TempDiffCoefMax, QMixDiffCoefMax, MYLv2ParamA1, MYLv2ParamB1, MYLv2ParamA2, MYLv2ParamB2, MYLv2ParamC1 )
| NAMELIST : |
|
| FlagConstDiffCoef : | logical , save
| : | Flag for use of constant diffusion coefficient
|
|
| ConstDiffCoefM : | real(DP), save
| : | Diffusion coefficient for momentum that is used in the case of
FlagConstDiffCoef == .true.
|
|
| ConstDiffCoefH : | real(DP), save
| : | Diffusion coefficient for heat that is used in the case of
FlagConstDiffCoef == .true.
|
|
| SquareVelMin : | real(DP), save
| : | 風二乗差最小値. Minimum value of square of velocity
|
|
| BulkRiNumMin : | real(DP), save
| : | バルク $ R_i $ 数最小値. Minimum value of bulk $ R_i $
|
|
| MixLengthMax : | real(DP), save
| : | 最大混合距離. Maximum mixing length
|
|
| TildeShMin : | real(DP), save
| : | $ tilde{S_h} $ 最小値. Minimum $ tilde{S_h} $
|
|
| TildeSmMin : | real(DP), save
| : | $ tilde{S_m} $ 最小値. Minimum $ tilde{S_m} $
|
|
| VelDiffCoefMin : | real(DP), save
| : | $ Dvect{u} $ 拡散係数最小値. Minimum diffusion coefficient of $ Dvect{u} $
|
|
| TempDiffCoefMin : | real(DP), save
| : | $ T $ 拡散係数最小値. Minimum diffusion coefficient of $ T $
|
|
| QMixDiffCoefMin : | real(DP), save
| : | $ q $ 拡散係数最小値. Minimum diffusion coefficient of $ q $
|
|
| VelDiffCoefMax : | real(DP), save
| : | $ Dvect{u} $ 拡散係数最大値. Maximum diffusion coefficient of $ Dvect{u} $
|
|
| TempDiffCoefMax : | real(DP), save
| : | $ T $ 拡散係数最大値. Maximum diffusion coefficient of $ T $
|
|
| QMixDiffCoefMax : | real(DP), save
| : | $ q $ 拡散係数最大値. Maximum diffusion coefficient of $ q $
|
|
| MYLv2ParamA1 : | real(DP), save
|
| MYLv2ParamB1 : | real(DP), save
|
| MYLv2ParamA2 : | real(DP), save
|
| MYLv2ParamB2 : | real(DP), save
|
| MYLv2ParamC1 : | real(DP), save
|
デフォルト値については初期化手続 "vdiffusion_my1974#VDiffInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "vdiffusion_my1974#VDiffInit"
for the default values.
This namelist group name is input/output in vdiffusion_my1974#VDiffInit
venus_simple_forcing_nml( SurfFrictionTimeConstInEarthDay, FlagConstNCC, ConstNCCInEarthDay )
| NAMELIST : |
|
| SurfFrictionTimeConstInEarthDay : | real(DP), save
|
| FlagConstNCC : | logical , save
|
| ConstNCCInEarthDay : | real(DP), save
|
デフォルト値については初期化手続
"venus_simple_forcing#YT2003ForcingInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"venus_simple_forcing#YT2003ForcingInit" for the default values.
This namelist group name is input/output in yt2003_forcing#YT2003ForcingInit
vertical_filter_nml( FilterParameter )
| NAMELIST : |
|
| FilterParameter : | real(DP), save
| : | 鉛直フィルターの係数. Vertical filter coefficient
| !$ integer, save: | IntStep ! 鉛直フィルターを適用するステップ間隔.
|
!$ ! Step interval of vertical filter application
| !$ integer, save: | CurStep ! VerticalFilter が呼ばれた回数.
|
!$ ! Number of times that "VerticalFilter" is called
| !$ integer, save: | PrevStep ! 前回鉛直フィルターを適用したステップ数.
|
!$ ! Step number that is filtered previously
|
|
, IntStep
デフォルト値については初期化手続 "vertical_filter#VerticalFilterInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "vertical_filter#VerticalFilterInit"
for the default values.
This namelist group name is input/output in vertical_filter#VerticalFilterInit