Class major_comp_saturate
In: saturate/major_comp_saturate.f90

主成分相変化

Phase change of atmospheric major component

Note that Japanese and English are described in parallel.

Procedures List

!$ ! DryConvAdjust :乾燥対流調節
!$ ! ———— :————
!$ ! DryConvAdjust :Dry convective adjustment

NAMELIST

NAMELIST#major_comp_saturate_nml

Methods

Included Modules

gridset dc_types namelist_util dc_message dc_string

Public Instance methods

MajorCompSaturateCalcCondTemp( xy_Press, xy_TempCond )
Subroutine :
xy_Press(0:imax-1, 1:jmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xy_TempCond(0:imax-1, 1:jmax) :real(DP), intent(out)
: Condensation temperature

主成分相変化

Major component phase change

Alias for MajorCompSaturateCalcCondTemp2D

MajorCompSaturateCalcCondTemp( xyz_Press, xyz_TempCond )
Subroutine :
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xyz_TempCond(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: Condensation temperature

主成分相変化

Major component phase change

Alias for MajorCompSaturateCalcCondTemp3D

Subroutine :
CondMajCompName :character(*), intent(in)
: Condensable major component

major_comp_saturate モジュールの初期化を行います. NAMELIST#major_comp_saturate_nml の読み込みはこの手続きで行われます.

"major_comp_saturate" module is initialized. "NAMELIST#major_comp_saturate_nml" is loaded in this procedure.

[Source]

  subroutine MajorCompSaturateInit( CondMajCompName )
    !
    ! major_comp_saturate モジュールの初期化を行います. 
    ! NAMELIST#major_comp_saturate_nml の読み込みはこの手続きで行われます. 
    !
    ! "major_comp_saturate" module is initialized. 
    ! "NAMELIST#major_comp_saturate_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

!!$    ! NAMELIST ファイル入力に関するユーティリティ
!!$    ! Utilities for NAMELIST file input
!!$    !
!!$    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
!!$
!!$    ! ファイル入出力補助
!!$    ! File I/O support
!!$    !
!!$    use dc_iounit, only: FileOpen
!!$
!!$    ! 種別型パラメタ
!!$    ! Kind type parameter
!!$    !
!!$    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: StoA


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in) :: CondMajCompName
                                        ! Condensable major component


!!$    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
!!$                              ! Unit number for NAMELIST file open
!!$    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
!!$                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /major_comp_saturate_nml/ &
!!$      & FlagUse

          ! デフォルト値については初期化手続 "major_comp_saturate#MajorCompSaturateInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "major_comp_saturate#MajorCompSaturateInit" for the default values. 
          !

    ! 実行文 ; Executable statement
    !

    if ( major_comp_saturate_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml,                    &  ! (in)
!!$        & nml = major_comp_saturate_nml, &  ! (out)
!!$        & iostat = iostat_nml )             ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$!      if ( iostat_nml == 0 ) write( STDOUT, nml = cumulus_adjust_nml )
!!$    end if


    ! Set index
    select case ( CondMajCompName )
    case ( 'CO2' )
      IndexSpc = IndexSpcCO2
    case default
      call MessageNotify( 'E', module_name, 'This specice is not supported.' )
    end select



    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    major_comp_saturate_inited = .true.

  end subroutine MajorCompSaturateInit
Function :
LatentHeat :real(DP)

主成分の潜熱を返しします.

Inquiry of latent heat of major component

[Source]

  function MajorCompSaturateInqLatentHeat( ) result( LatentHeat )
    !
    ! 主成分の潜熱を返しします. 
    !
    ! Inquiry of latent heat of major component
    !

    ! モジュール引用 ; USE statements
    !

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP) :: LatentHeat


    ! 実行文 ; Executable statement
    !

    ! 初期化
    ! Initialization
    !
    if ( .not. major_comp_saturate_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    ! Set latent heat
    select case ( IndexSpc )
    case ( IndexSpcCO2  )
      LatentHeat = LatentHeatCO2Subl
    case default
      call MessageNotify( 'E', module_name, 'This specice is not supported.' )
    end select


  end function MajorCompSaturateInqLatentHeat
major_comp_saturate_inited
Variable :
major_comp_saturate_inited = .false. :logical, save, public
: 初期設定フラグ. Initialization flag

Private Instance methods

Subroutine :
xy_Press(0:imax-1, 1:jmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xy_TempCond(0:imax-1, 1:jmax) :real(DP), intent(out)
: Condensation temperature

CO2 相変化

CO2 phase change

[Source]

  subroutine CalcCO2CondTemp2D( xy_Press, xy_TempCond )
    !
    ! CO2 相変化
    !
    ! CO2 phase change
    !

    ! モジュール引用 ; USE statements
    !


    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in ):: xy_Press   (0:imax-1, 1:jmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(out):: xy_TempCond(0:imax-1, 1:jmax)
                              !
                              ! Condensation temperature

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !


    ! 初期化
    ! Initialization
    !
    if ( .not. major_comp_saturate_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    xy_TempCond = 149.2_DP + 6.48_DP * log( 0.135_DP * xy_Press * 1.0d-2 )


  end subroutine CalcCO2CondTemp2D
Subroutine :
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xyz_TempCond(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: Condensation temperature

CO2 相変化

CO2 phase change

[Source]

  subroutine CalcCO2CondTemp3D( xyz_Press, xyz_TempCond )
    !
    ! CO2 相変化
    !
    ! CO2 phase change
    !

    ! モジュール引用 ; USE statements
    !


    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in ):: xyz_Press   (0:imax-1, 1:jmax, 1:kmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(out):: xyz_TempCond(0:imax-1, 1:jmax, 1:kmax)
                              !
                              ! Condensation temperature

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !


    ! 初期化
    ! Initialization
    !
    if ( .not. major_comp_saturate_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    xyz_TempCond = 149.2_DP + 6.48_DP * log( 0.135_DP * xyz_Press * 1.0d-2 )


  end subroutine CalcCO2CondTemp3D
IndexSpc
Variable :
IndexSpc :integer, save
IndexSpcCO2
Constant :
IndexSpcCO2 = 1 :integer, parameter
LatentHeatCO2Subl
Constant :
LatentHeatCO2Subl = 5.9d5 :real(DP), parameter
: Latent heat of CO2 (J kg^{-1}) This value is obtained from Pollack et al. (1981) and Forget et al. (1998).
Subroutine :
xy_Press(0:imax-1, 1:jmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xy_TempCond(0:imax-1, 1:jmax) :real(DP), intent(out)
: Condensation temperature

主成分相変化

Major component phase change

[Source]

  subroutine MajorCompSaturateCalcCondTemp2D( xy_Press, xy_TempCond )
    !
    ! 主成分相変化
    !
    ! Major component phase change
    !

    ! モジュール引用 ; USE statements
    !


    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in ):: xy_Press   (0:imax-1, 1:jmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(out):: xy_TempCond(0:imax-1, 1:jmax)
                              !
                              ! Condensation temperature

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !


    ! 初期化
    ! Initialization
    !
    if ( .not. major_comp_saturate_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    select case ( IndexSpc )
    case ( IndexSpcCO2 )
      call CalcCO2CondTemp2D( xy_Press, xy_TempCond )
    end select


  end subroutine MajorCompSaturateCalcCondTemp2D
Subroutine :
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(in )
: $ p $ . 気圧 (整数レベル). Air pressure (full level)
xyz_TempCond(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)
: Condensation temperature

主成分相変化

Major component phase change

[Source]

  subroutine MajorCompSaturateCalcCondTemp3D( xyz_Press, xyz_TempCond )
    !
    ! 主成分相変化
    !
    ! Major component phase change
    !

    ! モジュール引用 ; USE statements
    !


    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in ):: xyz_Press   (0:imax-1, 1:jmax, 1:kmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(out):: xyz_TempCond(0:imax-1, 1:jmax, 1:kmax)
                              !
                              ! Condensation temperature

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !


    ! 初期化
    ! Initialization
    !
    if ( .not. major_comp_saturate_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    select case ( IndexSpc )
    case ( IndexSpcCO2 )
      call CalcCO2CondTemp3D( xyz_Press, xyz_TempCond )
    end select


  end subroutine MajorCompSaturateCalcCondTemp3D
module_name
Constant :
module_name = ‘major_comp_saturate :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: dcpam5-20121128 $’ // ’$Id: major_comp_saturate.f90,v 1.1 2012-09-08 15:16:39 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version