飽和比湿の算出

Evaluate saturation specific humidity

Note that Japanese and English are described in parallel.

飽和比湿および飽和比湿の温度微分の値を算出します.

Saturation specific humidity and temperature derivative of it are calculated.

飽和比湿の計算にはデフォルトでは Tetens (1930) を用いる (saturate_t1930 参照). また, Config.mk の CPPFLAGS に -DLIB_SATURATE_NHA1992 を指定すると Nakajima et al. (1992) を用いる (saturate_tnha1992 参照).

By default, Tetens (1930) is used for calculation of saturation specific humidity (See "saturate_t1930"). If "-DLIB_SATURATE_NHA1992" is specified to "CPPFLAGS" in Config.mk, Nakajima et al. (1992) is used (See "saturate_nha1992").

References

Procedures List

CalcQVapSat :	飽和比湿の計算
CalcDQVapSatDTemp :	飽和比湿の温度微分の計算
———— :	————
CalcQVapSat :	Calculate saturation specific humidity
CalcDQVapSatDTemp :	Calculate temperature derivative of saturation specific humidity

Methods

SaturateInit module_name saturate_inited saturate_scheme version xy_CalcDQVapSatDTemp xy_CalcQVapSat xyz_CalcDQVapSatDTemp xyz_CalcQVapSat

Included Modules

dc_types dc_message gridset saturate_nha1992 saturate_t1930 namelist_util dc_iounit dc_string gtool_historyauto

Public Instance methods

saturate_inited

Variable :

saturate_inited = .false. :

logical, save, public

:	初期設定フラグ. Initialization flag

xy_CalcDQVapSatDTemp( xy_Temp, xy_QVapSat ) result(xy_DQVapSatDTemp)

Function :

xy_DQVapSatDTemp(0:imax-1, 1:jmax) :

real(DP)

:	$ DP{q^{*}}{T} $ . 飽和比湿の温度微分. Temperature derivative of saturation specific humidity.

xy_Temp(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	$ T $ . 温度. Temperature

xy_QVapSat(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	$ q^{*} $ . 飽和比湿. Saturation specific humidity

温度 Temp と飽和比湿 QVapSat を用い, 飽和比湿の温度微分 DQVapSatDTemp を求めます.

Calculate temperature derivative of saturation specific humidity DQVapSatDTemp using temperature Temp and saturation specific humidity QVapSat.

[Source]

  function xy_CalcDQVapSatDTemp( xy_Temp, xy_QVapSat ) result( xy_DQVapSatDTemp )
    !
    ! 温度 *Temp* と飽和比湿 *QVapSat* を用い, 
    ! 飽和比湿の温度微分 *DQVapSatDTemp* を求めます. 
    !
    ! Calculate temperature derivative of saturation specific humidity 
    ! *DQVapSatDTemp* using
    ! temperature *Temp* and saturation specific humidity *QVapSat*. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xy_Temp   (0:imax-1, 1:jmax)
                              ! $ T $ . 温度. Temperature
    real(DP), intent(in):: xy_QVapSat(0:imax-1, 1:jmax)
                              ! $ q^{*} $ . 飽和比湿. Saturation specific humidity
    real(DP):: xy_DQVapSatDTemp(0:imax-1, 1:jmax)
                              ! $ \DP{q^{*}}{T} $ . 飽和比湿の温度微分. 
                              ! Temperature derivative of saturation specific humidity. 

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !

    call SaturateInit

    xy_DQVapSatDTemp = xy_CalcDQVapSatDTempCore( 0, imax-1, 1, jmax, xy_Temp, xy_QVapSat )


  end function xy_CalcDQVapSatDTemp

xy_CalcQVapSat( xy_Temp, xy_Press ) result(xy_QVapSat)

Function :

xy_QVapSat(0:imax-1, 1:jmax) :

real(DP)

:	$ q^{*} $ . 飽和比湿. Saturation specific humidity

xy_Temp(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	$ T $ . 温度. Temperature

xy_Press(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	$ p $ . 気圧. Air pressure

温度 Temp と気圧 Press を用い, 飽和比湿 QVapSat を求めます.

Calculate saturation specific humidity QVapSat using temperature Temp and air pressure Press.

[Source]

  function xy_CalcQVapSat( xy_Temp, xy_Press ) result( xy_QVapSat )
    !
    ! 温度 *Temp* と気圧 *Press* を用い, 
    ! 飽和比湿 *QVapSat* を求めます. 
    !
    ! Calculate saturation specific humidity *QVapSat* using
    ! temperature *Temp* and air pressure *Press*. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xy_Temp (0:imax-1, 1:jmax)
                              ! $ T $ . 温度. Temperature
    real(DP), intent(in):: xy_Press(0:imax-1, 1:jmax)
                              ! $ p $ . 気圧. Air pressure

    real(DP):: xy_QVapSat(0:imax-1, 1:jmax)
                              ! $ q^{*} $ . 飽和比湿. Saturation specific humidity

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !

    call SaturateInit

    xy_QVapSat = xy_CalcQVapSatCore( 0, imax-1, 1, jmax, xy_Temp, xy_Press )


  end function xy_CalcQVapSat

xyz_CalcDQVapSatDTemp( xyz_Temp, xyz_QVapSat ) result(xyz_DQVapSatDTemp)

Function :

xyz_DQVapSatDTemp(0:imax-1, 1:jmax, 1:size(xyz_Temp,3)) :

real(DP)

:	$ DP{q^{*}}{T} $ . 飽和比湿の温度微分. Temperature derivative of saturation specific humidity.

xyz_Temp(:,:,:) :

real(DP), intent(in)

:	$ T $ . 温度. Temperature

xyz_QVapSat(:,:,:) :

real(DP), intent(in)

:	$ q^{*} $ . 飽和比湿. Saturation specific humidity

温度 Temp と飽和比湿 QVapSat を用い, 飽和比湿の温度微分 DQVapSatDTemp を求めます.

Calculate temperature derivative of saturation specific humidity DQVapSatDTemp using temperature Temp and saturation specific humidity QVapSat.

[Source]

  function xyz_CalcDQVapSatDTemp( xyz_Temp, xyz_QVapSat ) result( xyz_DQVapSatDTemp )
    !
    ! 温度 *Temp* と飽和比湿 *QVapSat* を用い, 
    ! 飽和比湿の温度微分 *DQVapSatDTemp* を求めます. 
    !
    ! Calculate temperature derivative of saturation specific humidity 
    ! *DQVapSatDTemp* using
    ! temperature *Temp* and saturation specific humidity *QVapSat*. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xyz_Temp   (:,:,:)
                              ! $ T $ . 温度. Temperature
    real(DP), intent(in):: xyz_QVapSat(:,:,:)
                              ! $ q^{*} $ . 飽和比湿. Saturation specific humidity
    real(DP):: xyz_DQVapSatDTemp(0:imax-1, 1:jmax, 1:size(xyz_Temp,3))
                              ! $ \DP{q^{*}}{T} $ . 飽和比湿の温度微分. 
                              ! Temperature derivative of saturation specific humidity. 

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !

    call SaturateInit

    xyz_DQVapSatDTemp = xyz_CalcDQVapSatDTempCore( 0, imax-1, 1, jmax, 1, size(xyz_Temp,3), xyz_Temp, xyz_QVapSat )

  end function xyz_CalcDQVapSatDTemp

xyz_CalcQVapSat( xyz_Temp, xyz_Press ) result(xyz_QVapSat)

Function :

xyz_QVapSat(0:imax-1, 1:jmax, 1:size(xyz_Temp,3)) :

real(DP)

:	$ q^{*} $ . 飽和比湿. Saturation specific humidity

xyz_Temp(:,:,:) :

real(DP), intent(in)

:	$ T $ . 温度. Temperature

xyz_Press(:,:,:) :

real(DP), intent(in)

:	$ p $ . 気圧. Air pressure

温度 Temp と気圧 Press を用い, 飽和比湿 QVapSat を求めます.

Calculate saturation specific humidity QVapSat using temperature Temp and air pressure Press.

[Source]

  function xyz_CalcQVapSat( xyz_Temp, xyz_Press ) result( xyz_QVapSat )
    !
    ! 温度 *Temp* と気圧 *Press* を用い, 
    ! 飽和比湿 *QVapSat* を求めます. 
    !
    ! Calculate saturation specific humidity *QVapSat* using
    ! temperature *Temp* and air pressure *Press*. 
    !

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xyz_Temp (:,:,:)
                              ! $ T $ . 温度. Temperature
    real(DP), intent(in):: xyz_Press(:,:,:)
                              ! $ p $ . 気圧. Air pressure

    real(DP):: xyz_QVapSat(0:imax-1, 1:jmax, 1:size(xyz_Temp,3))
                              ! $ q^{*} $ . 飽和比湿. Saturation specific humidity

    ! 作業変数
    ! Work variables
    !

    ! 実行文 ; Executable statement
    !

    call SaturateInit

    xyz_QVapSat = xyz_CalcQVapSatCore( 0, imax-1, 1, jmax, 1, size(xyz_Temp,3), xyz_Temp, xyz_Press )


  end function xyz_CalcQVapSat

Private Instance methods

SaturateInit( )

Subroutine :

saturate モジュールの初期化を行います.

"saturate" module is initialized.

[Source]

  subroutine SaturateInit
    !
    ! saturate モジュールの初期化を行います. 
    !
    !
    ! "saturate" module is initialized. 
    !

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: StoA

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! 宣言文 ; Declaration statements
    !
    implicit none

!!$    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
!!$                              ! Unit number for NAMELIST file open
!!$    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
!!$                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /saturate_nml/ 
          !
          ! デフォルト値については初期化手続 "saturate#SaturateInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "saturate#SaturateInit" for the default values. 
          !

    ! 実行文 ; Executable statement
    !

    if ( saturate_inited ) return

    ! デフォルト値の設定
    ! Default values settings
    !


!!$    ! NAMELIST の読み込み
!!$    ! NAMELIST is input
!!$    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml, &           ! (in)
!!$        & nml = saturate_nml, &  ! (out)
!!$        & iostat = iostat_nml )   ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$    end if

    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
    call MessageNotify( 'M', module_name, '  Scheme of saturation = %c', c1 = saturate_scheme )
    saturate_inited = .true.
  end subroutine SaturateInit

module_name

Constant :

module_name = ‘saturate‘ :

character(*), parameter

:	モジュールの名称. Module name

saturate_scheme

*Constant* :
`saturate_scheme` `= ifdef LIB_SATURATE_NHA1992 elif LIB_SATURATE_T1930 else endif` :	`character(*), parameter`

version

Constant :

version = ’$Name: dcpam5-20130219 $’ // ’$Id: saturate.F90,v 1.2 2013-02-19 01:37:07 yot Exp $’ :

character(*), parameter

:	モジュールのバージョン Module version