Public Instance methods
albedo_Matthews_nml( flag_annual_mean, OceanAlbedo )
| NAMELIST : |
|
| flag_annual_mean : | logical , save
| : | 年平均フラグ. Flag of annual mean
|
|
| OceanAlbedo : | real(DP) , save
| : | 海洋のアルベド. Albedo of ocean.
|
|
デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"surface_flux_bulk#SurfFluxInit" for the default values.
This namelist group name is input/output in
albedo_Matthews#AlbedoMatthewsInit
auxiliary_nml( RefPress )
axesset_nml( Sigma, Depth, flag_generate_sigma, LonInDeg, LatInDeg )
| NAMELIST : |
|
| Sigma(1:MaxNmlArySize) : | real(DP), save
| : | $ sigma $ レベル (半整数). Half $ sigma $ level
|
|
| Depth(1:MaxNmlArySize) : | real(DP), save
| : | 入力用配列, 地下の鉛直層境界 array for input, layer interface of
subsurface vertical layer
|
|
| flag_generate_sigma : | logical
| : | 鉛直層数の内部生成のためのフラグ Flag for generation of sigma levels
internally
|
|
| LonInDeg : | real(DP)
| : | Longitude in unit of degree of a grid point in 1D mode
|
|
| LatInDeg : | real(DP)
| : | Latitude in unit of degree of a grid point in 1D mode
|
|
デフォルト値については初期化手続 "axesset#AxessetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "axesset#AxessetInit" for the default
values.
This namelist group name is input/output in axesset#AxessetInit
bucket_model_nml( SoilMoistCritAmnt, SoilMoistCritAmntforEvapEff )
| NAMELIST : |
|
| SoilMoistCritAmnt : | real(DP), save
| : | 土壌水分量の上限値 Critical amount of soil moisture
|
|
| SoilMoistCritAmntforEvapEff : | real(DP), save
| : | 地表湿潤度を 1 とする閾値 Critical amount of soil moisture for evaporation
efficiency
|
|
実行文 ; Executable statement
This namelist group name is input/output in Bucket_Model#BucketModelInit
check_prog_vars_nml( VelMin, VelMax, TempMin, TempMax )
cloud_T1993base_nml( CloudLifeTime )
| NAMELIST : |
|
| CloudLifeTime : | real(DP), save
|
デフォルト値については初期化手続
"cloud_T1993base#CloudT1993baseInit" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"cloud_T1993base#CloudT1993baseInit" for the default values.
This namelist group name is input/output in
cloud_T1993base#CloudT1993baseInit
cloud_simple_nml( CloudLifeTime, CloudWatLifeTime, CloudIceLifeTime, CloudCoverMethod, RHCrtl, CloudCover )
cloud_utils_nml( CloudOverlapType, TempWatLim, TempIceLim )
composition_nml( ncmax, Names, LongNames, FlagMassFix, FlagAdv, FlagVDiff )
| NAMELIST : |
|
| ncmax : | integer , save, public
|
| Names(1:MaxNmlArySize) : | character(len=STRING)
|
| LongNames(1:MaxNmlArySize) : | character(len=STRING)
|
| FlagMassFix(1:MaxNmlArySize) : | logical
|
| FlagAdv(1:MaxNmlArySize) : | logical
|
| FlagVDiff(1:MaxNmlArySize) : | logical
|
デフォルト値については初期化手続 "composition#CompositionInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "composition#CompositionInit" for
the default values.
This namelist group name is input/output in composition#CompositionInit
constants_nml( RPlanet, Omega, Grav, MolWtDry, CpDry, MolWtWet, CpWet, LatentHeat, LatentHeatFusion )
| NAMELIST : |
|
| RPlanet : | real(DP), save, public
| : | $ a $ [m]. 惑星半径. Radius of planet
|
|
| Omega : | real(DP), save, public
| : | $ Omega $ [s-1]. 回転角速度. Angular velocity
|
|
| Grav : | real(DP), save, public
| : | $ g $ [m s-2]. 重力加速度. Gravitational acceleration
|
|
| MolWtDry : | real(DP), save, public
| : | $ M $ [kg mol-1]. 乾燥大気の平均分子量. Mean molecular weight of dry air
|
|
| CpDry : | real(DP), save, public
| : | $ C_p $ [J kg-1 K-1]. 乾燥大気の定圧比熱. Specific heat of air at constant
pressure
|
|
| MolWtWet : | real(DP), save, public
| : | $ M_v $ [kg mol-1]. 凝結成分の平均分子量. Mean molecular weight of
condensible elements
|
|
| CpWet : | real(DP), save, public
| : | $ C_v $ [J kg-1 K-1] . 凝結成分の定圧比熱. Specific heat of condensible
elements at constant pressure
|
|
| LatentHeat : | real(DP), save, public
| : | $ L $ [J kg-1] . 凝結の潜熱. Latent heat of condensation
|
|
| LatentHeatFusion : | real(DP), save, public
| : | $ L $ [J kg-1] . 融解の潜熱. Latent heat of fusion
|
|
デフォルト値については初期化手続 "constants#ConstantsInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "constants#ConstantsInit" for the
default values.
This namelist group name is input/output in constants#ConstantsInit
constants_snowseaice_nml( ThresholdSurfSnow , SnowAlbedo , TempCondWater , SeaIceVolHeatCap , SeaIceThermCondCoef, SeaIceThreshold , SeaIceThickness , TempBelowSeaIce , SeaIceAlbedo , CO2IceAlbedoS , CO2IceAlbedoN , CO2IceEmisS , CO2IceEmisN )
| NAMELIST : |
|
| ThresholdSurfSnow : | real(DP), public, save
|
| SnowAlbedo : | real(DP), public, save
|
| TempCondWater : | real(DP), public, save
| : | <Japanese> Condensation temperature of water
|
|
| SeaIceVolHeatCap : | real(DP), public, save
| : | Volumetric heat capacity of sea ice (J m-3 K-1)
|
|
| SeaIceThermCondCoef : | real(DP), public, save
| : | Thermal conductivity of sea ice (W m-1 K-1)
|
|
| SeaIceThreshold : | real(DP), public, save
|
| SeaIceThickness : | real(DP), public, save
|
| TempBelowSeaIce : | real(DP), public, save
|
| SeaIceAlbedo : | real(DP), public, save
|
| CO2IceAlbedoS : | real(DP), public, save
|
| CO2IceAlbedoN : | real(DP), public, save
|
| CO2IceEmisS : | real(DP), public, save
|
| CO2IceEmisN : | real(DP), public, save
|
デフォルト値については初期化手続 "constants#ConstantsInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "constants#ConstantsInit" for the
default values.
This namelist group name is input/output in constants_snowseaice#ConstantsSnowSeaIceInit
cumulus_adjust_nml( CrtlRH, ItrtMax, TempSatMax )
dcpam_main_nml( DynMode, PhysMode, RadModel, SfcFluxMethod, VDiffMethod, PhysImpMode, MCMethod, LSCMethod, CloudMethod, SfcMoistMethod, DCMethod, FlagSnow, FlagMajCompPhaseChange, CondMajCompName )
| NAMELIST : |
|
| DynMode : | character(STRING)
| : | Dynamics used in calculation
|
|
| PhysMode : | character(STRING)
| : | Physics used in calculation
|
|
| RadModel : | character(STRING)
| : | Radiation model used in calculation
|
|
| SfcFluxMethod : | character(STRING)
| : | Method for surface flux evaluation used in calculation
|
|
| VDiffMethod : | character(STRING)
| : | Method for vertical diffusion evaluation used in calculation
|
|
| PhysImpMode : | character(STRING)
| : | Mode for implicit method used in calculation
|
|
| MCMethod : | character(STRING)
| : | Moist convection parameterization
|
|
| LSCMethod : | character(STRING)
| : | Large scale condensation parameterization
|
|
| CloudMethod : | character(STRING)
|
| SfcMoistMethod : | character(STRING)
|
| DCMethod : | character(STRING)
|
| FlagSnow : | logical
|
| FlagMajCompPhaseChange : | logical
| : | flag for use of major component phase change
|
|
| CondMajCompName : | character(STRING)
| : | name of condensable major component
|
|
デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"main/dcpam_main.F90#MainInit" for the default values.
This namelist group name is input/output in main/dcpam_main.f90#MainInit
dcpam_main_nml( DynMode, PhysMode, RadModel, SfcFluxMethod, VDiffMethod, PhysImpMode, MCMethod, LSCMethod, CloudMethod, SfcMoistMethod, DCMethod, FlagSnow, FlagMajCompPhaseChange, CondMajCompName )
| NAMELIST : |
|
| DynMode : | character(STRING)
| : | Dynamics used in calculation
|
|
| PhysMode : | character(STRING)
| : | Physics used in calculation
|
|
| RadModel : | character(STRING)
| : | Radiation model used in calculation
|
|
| SfcFluxMethod : | character(STRING)
| : | Method for surface flux evaluation used in calculation
|
|
| VDiffMethod : | character(STRING)
| : | Method for vertical diffusion evaluation used in calculation
|
|
| PhysImpMode : | character(STRING)
| : | Mode for implicit method used in calculation
|
|
| MCMethod : | character(STRING)
| : | Moist convection parameterization
|
|
| LSCMethod : | character(STRING)
| : | Large scale condensation parameterization
|
|
| CloudMethod : | character(STRING)
|
| SfcMoistMethod : | character(STRING)
|
| DCMethod : | character(STRING)
|
| FlagSnow : | logical
|
| FlagMajCompPhaseChange : | logical
| : | flag for use of major component phase change
|
|
| CondMajCompName : | character(STRING)
| : | name of condensable major component
|
|
デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"main/dcpam_main.F90#MainInit" for the default values.
This namelist group name is input/output in main/dcpam_main.f90#dcpam_main
dry_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion, FlagAdjustMom, FlagAdjustMR )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| AdjustCriterion(1:MaxNmlArySize) : | real(DP), save
| : | 調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of
adjustment (temperature difference equivalent to difference of dry static
energy)
|
|
| FlagAdjustMom : | logical, save
| : | Flag for adjusting momentum
|
|
| FlagAdjustMR : | logical, save
| : | Flag for adjusting mixing ratio
|
|
デフォルト値については初期化手続 "dry_conv_adjust#DryConvAdjustInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "dry_conv_adjust#DryConvAdjustInit"
for the default values.
This namelist group name is input/output in dry_conv_adjust#DryConvAdjustInit
dynamics_hspl_vas83_nml( TimeIntegScheme, HDOrder, HDEFoldTimeValue, HDEFoldTimeUnit, FlagSpongeLayer, FlagSpongeLayerforZonalMean, FlagSpongeLayerforHeat, SLEFoldTimeValue, SLEFoldTimeUnit, SLOrder, SLNumLayer, RefTemp, FlagDivDamp, DivDampPeriodValue, DivDampPeriodUnit, FlagTotMassFix, FlagMassHorDifCor, FlagSLTT, FlagCalcUVTPs )
| NAMELIST : |
|
| TimeIntegScheme : | character(TOKEN)
| : | 時間積分法. 以下の方法を選択可能.
Time integration scheme. Available schemes are as follows.
- "Semi-implicit"
- "Explicit"
|
|
| HDOrder : | integer
| : | 超粘性の次数. Order of hyper-viscosity
|
|
| HDEFoldTimeValue : | real(DP)
| : | 最大波数に対する e-folding time. 負の値を与えると,
水平拡散係数をゼロにします.
E-folding time for maximum wavenumber. If negative value is given,
coefficients of horizontal diffusion become zero.
|
|
| HDEFoldTimeUnit : | character(TOKEN)
| : | 最大波数に対する e-folding time の単位. Unit of e-folding time for maximum
wavenumber
|
|
| FlagSpongeLayer : | logical
|
| FlagSpongeLayerforZonalMean : | logical
|
| FlagSpongeLayerforHeat : | logical
|
| SLEFoldTimeValue : | real(DP)
| : | スポンジ層の最上層における減衰時定数 Damping time constant at the top
model layer in a sponge layer
|
|
| SLEFoldTimeUnit : | character(TOKEN)
| : | SLEFoldTimeValue の単位 Unit of SLEFoldTimeValue
|
|
| SLOrder : | integer
| : | スポンジ層の減衰係数の sigma 依存性のオーダ Sigma dependence of damping
coefficient in a sponge layer
|
|
| SLNumLayer : | integer
| : | スポンジ層が適応されるモデル上端からの層の数 Number of layers which the
sponge layer is applied.
|
|
| RefTemp : | real(DP)
| : | $ overline{T} $ . 基準温度. Reference temperature
|
|
| FlagDivDamp : | logical , save
| : | Flag for divergence damping
|
|
| DivDampPeriodValue : | real(DP)
| : | Period for divergence damping application
|
|
| DivDampPeriodUnit : | character(TOKEN)
| : | Unit of DivDampPeriodValue
|
|
| FlagTotMassFix : | logical , save
| : | Flag for fixing total mass
|
|
| FlagMassHorDifCor : | logical , save
| : | Flag for correction of horizontal diffusion of mass
|
|
| FlagSLTT : | logical , save
| : | セミラグランジュ法による物質移流フラグ。 Flag for using Semi-Lagrangian
method for tracer transport.
|
|
| FlagCalcUVTPs : | logical , save
| : | U, V, T, Ps を計算するかどうかのフラグ Flag for calculating U, V, T, and
Ps This is mainly used for advection test.
|
|
デフォルト値については初期化手続
"dynamics_hspl_vas83#DynamicsInit" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"dynamics_hspl_vas83#DynamicsInit" for the default values.
This namelist group name is input/output in dynamics_hspl_vas83#DynamicsHSplVAS83Init
dynamics_physicsonly_nml( UGeo, VGeo, WMagnitude, WHeight, WTimeInit )
| NAMELIST : |
|
| UGeo : | real(DP) , save
|
| VGeo : | real(DP) , save
|
| WMagnitude : | real(DP) , save
|
| WHeight : | real(DP) , save
|
| WTimeInit : | real(DP) , save
|
デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"surface_flux_bulk#SurfFluxInit" for the default values.
This namelist group name is input/output in dynamics_physicsonly#DynamicsPhysicsOnlyInit
fileset_nml( FileTitle, FileSource, FileInstitution )
| NAMELIST : |
|
| FileTitle : | character(STRING), save, public
| : | 出力データファイルの表題. Title of output data files
|
|
| FileSource : | character(STRING), save, public
| : | データファイル作成の手段. Source of data file
|
|
| FileInstitution : | character(STRING), save, public
| : | データファイルを最終的に変更した組織/個人. Institution or person that
changes data files for the last time
|
|
デフォルト値については初期化手続 "fileset#FilesetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "fileset#FilesetInit" for the default
values.
This namelist group name is input/output in fileset#FilesetInit
gridset_nml( nmax, imax, jmax, kmax, kslmax )
| NAMELIST : |
|
| nmax : | integer, save, public
| : | 最大全波数. Maximum truncated wavenumber
|
|
| imax : | integer, save, public
| : | 経度格子点数. Number of grid points in longitude
|
|
| jmax : | integer, save, public
| : | 緯度格子点数. Number of grid points in latitude
|
|
| kmax : | integer, save, public
| : | 鉛直層数. Number of vertical level
|
|
| kslmax : | integer, save, public
| : | 地下の鉛直層数. Number of subsurface vertical level
|
|
デフォルト値については初期化手続 "gridset#GridsetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "gridset#GridsetInit" for the default
values.
This namelist group name is input/output in gridset#GridsetInit
held_suarez_1994_nml( SigmaB, kfTimeScaleInDay, kaTimeScaleInDay, ksTimeScaleInDay )
initial_data_nml( Pattern, TempAvr, PsAvr, QVapAvr, Ueq, UGeos, VGeos )
| NAMELIST : |
|
| Pattern : | character(STRING), save, public
| : | 初期値データのパターン. 以下のパターンを選択可能.
Initial data pattern Available patterns are as follows.
- "Small Disturbance of Temperature" (default value)
- "AGCM 5.3 Default"
- "Sugiyama et al. (2008)"
|
|
| TempAvr : | real(DP), save, public
| : | $ bar{T} $ . 温度平均値. Mean temperature
|
|
| PsAvr : | real(DP), save, public
| : | $ bar{p_s} $ . 地表面気圧平均値. Mean surface pressure
|
|
| QVapAvr : | real(DP), save, public
| : | $ bar{q} $ . 比湿平均値. Mean specific humidity
|
|
| Ueq : | real(DP), save, public
| : | $ u_{eq} $ . 赤道上の東西風速. Eastward wind on the equator
|
|
| UGeos : | real(DP), save, public
| : | $ u_{g} $ . Eastward geostrophic wind
|
|
| VGeos : | real(DP), save, public
| : | $ v_{g} $ . Northward geostrophic wind
|
|
デフォルト値については初期化手続 "initial_data#InitDataInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "initial_data#InitDataInit" for
the default values.
This namelist group name is input/output in initial_data#InitDataInit
lb_flux_simple_nml( LBMomFluxMode, FricTimeConstAtLBValue, FricTimeConstAtLBUnit, FricLowestLatAtLB, LBHeatFluxMode, HeatFluxAtLB, TempAtLB, LBH2OVapFluxMode, H2OVapFluxAtLB, QH2OVapAtLB, DiffCoefHeatMass )
| NAMELIST : |
|
| LBMomFluxMode : | character(STRING)
|
| FricTimeConstAtLBValue : | real(DP)
|
| FricTimeConstAtLBUnit : | character(TOKEN)
|
| FricLowestLatAtLB : | real(DP), save
| : | 下部境界摩擦が働く最低緯度 (degree). Lowest latitude where the friction is
applied (degree)
|
|
| LBHeatFluxMode : | character(STRING)
|
| HeatFluxAtLB : | real(DP), save
| : | 下部境界での熱フラックス (W m-2). Heat flux at the lower boundary (W m-2).
|
|
| TempAtLB : | real(DP), save
|
| LBH2OVapFluxMode : | character(STRING)
|
| H2OVapFluxAtLB : | real(DP), save
| : | 下部境界での H2O 蒸気質量フラックス (W m-2).
実際にはゼロに固定するために使う程度にしか使えないだろう. H2O vapor flux at
the lower boundary (kg m-2 s-1).
|
|
| QH2OVapAtLB : | real(DP), save
|
| DiffCoefHeatMass : | real(DP), save
|
デフォルト値については初期化手続 "lb_flux_simple#LBFluxSimpleInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "lb_flux_simple#LBFluxSimpleInit"
for the default values.
This namelist group name is input/output in lb_flux_simple#LBFluxSimpleInit
lscond_nml( CrtlRH, ItrtMax, FlagUse )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| FlagUse : | logical, save
| : | 使用フラグ flag for use of this scheme
|
|
デフォルト値については初期化手続 "lscond#LSCondInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"lscond#LSCondInit" for the default values.
This namelist group name is input/output in lscond#LScaleCondInit
lscond_nml( Gamma, ItrtMax )
| NAMELIST : |
|
| Gamma : | real(DP), save
| : | Subgrid scale variation of specific humidity expressed as fraction of
specific humidity
!$ ! 臨界相対湿度. !$ ! Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
| !$ logical, save : | FlagUse
|
!$ ! 使用フラグ !$ ! flag for use of this scheme
|
|
, FlagUse
デフォルト値については初期化手続 "lscond#LSCondInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"lscond#LSCondInit" for the default values.
This namelist group name is input/output in
lscond_LL91#LScaleCondLL91Init
moist_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion )
| NAMELIST : |
|
| CrtlRH : | real(DP), save
| : | 臨界相対湿度. Critical relative humidity
|
|
| ItrtMax : | integer, save
| : | イテレーション回数. Number of iteration
|
|
| AdjustCriterion(1:MaxNmlArySize) : | real(DP), save
| : | 調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of
adjustment (temperature difference equivalent to difference of moist static
energy)
|
|
, FlagUse
This namelist group name is input/output in moist_conv_adjust#MoistConvAdjustInit
phy_implicit_atmonly_nml( FlagPresSurfTemp, FlagPresSurfQMix )
| NAMELIST : |
|
| FlagPresSurfTemp : | logical, save
|
| FlagPresSurfQMix : | logical, save
|
デフォルト値については初期化手続
"phy_implicit_atmonly#PhyImplInit" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"phy_implicit_atmonly#PhyImplInit" for the default values.
This namelist group name is input/output in phy_implicit_atmonly#PhyImplAtmOnlyInit
phy_implicit_sdh_V2_nml( SOHeatCapacity, NumMaxItr, TempItrCrit )
| NAMELIST : |
|
| SOHeatCapacity : | real(DP), save
| : | Slab ocean heat capacity (J m-2 K-1)
|
|
| NumMaxItr : | integer, save
|
| TempItrCrit : | real(DP), save
|
デフォルト値については初期化手続 "phy_implicit#PhyImplInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "phy_implicit#PhyImplInit" for the
default values.
This namelist group name is input/output in
phy_implicit_sdh_V2#PhyImplSDHV2Init
phy_implicit_sdh_nml( SOHeatCapacity )
rad_DennouAGCM_nml( SolarConst, DelTimeLongValue, DelTimeLongUnit, DelTimeShortValue, DelTimeShortUnit, LongBandNum, LongAbsorpCoefQVap, LongAbsorpCoefDryAir, LongBandWeight, LongPathLengthFact, ShortBandNum, ShortAbsorpCoefQVap, ShortAbsorpCoefDryAir, ShortBandWeight, ShortSecScat, ShortAtmosAlbedo, RstInputFile, RstOutputFile )
| NAMELIST : |
|
| SolarConst : | real(DP), save
|
| DelTimeLongValue : | real(DP), save
| : | 長波フラックスを計算する時間間隔の数値. Value of interval step of long
wave flux calculation
|
|
| DelTimeLongUnit : | character(STRING), save
| : | 長波フラックスを計算する時間間隔の単位. Unit of interval step of long wave
flux calculation
|
|
| DelTimeShortValue : | real(DP), save
| : | 短波 (日射) フラックスを計算する時間間隔の数値. Value of interval step of
short wave (insolation) flux calculation
|
|
| DelTimeShortUnit : | character(STRING), save
| : | 短波 (日射) フラックスを計算する時間間隔の単位. Unit of interval step of
short wave (insolation) flux calculation
|
|
| LongBandNum : | integer, save
| : | 長波バンド数. Number of long wave band
|
|
| LongAbsorpCoefQVap(1:MaxNmlArySize) : | real(DP), save
| : | $ k_R $ . 水の吸収係数. Absorption coefficient of water.
|
|
| LongAbsorpCoefDryAir(1:MaxNmlArySize) : | real(DP), save
| : | $ bar{k}_R $ . 空気の吸収係数. Absorption coefficient of air.
|
|
| LongBandWeight(1:MaxNmlArySize) : | real(DP), save
|
| LongPathLengthFact : | real(DP), save
| : | 光路長のファクタ. Factor of optical length
|
|
| ShortBandNum : | integer, save
| : | 短波バンド数. Number of short wave band
|
|
| ShortAbsorpCoefQVap(1:MaxNmlArySize) : | real(DP), save
| : | $ k_S $ . 水の吸収係数. Absorption coefficient of water.
|
|
| ShortAbsorpCoefDryAir(1:MaxNmlArySize) : | real(DP), save
| : | $ bar{k}_S $ . 空気の吸収係数. Absorption coefficient of air.
|
|
| ShortBandWeight(1:MaxNmlArySize) : | real(DP), save
|
| ShortSecScat : | real(DP), save
| : | 散乱の $ sec zeta $ . $ sec zeta $ of scattering
|
|
| ShortAtmosAlbedo : | real(DP), save
|
| RstInputFile : | character(STRING)
| : | 入力するリスタートデータのファイル名 Filename of input restart data
|
|
| RstOutputFile : | character(STRING)
| : | 出力するリスタートデータのファイル名 Filename of output restart data
|
|
デフォルト値については初期化手続 "rad_DennouAGCM#RadInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_DennouAGCM#RadInit" for the default values.
This namelist group name is input/output in
rad_DennouAGCM#RadDennouAGCMInit
rad_Earth_LW_V2_4_nml( FlagHighAlt, CloudWatREff, CloudIceREff, DelTimeCalcTransValue, DelTimeCalcTransUnit, flag_save_time )
| NAMELIST : |
|
| FlagHighAlt : | logical , save
|
| CloudWatREff : | real(DP), save
|
| CloudIceREff : | real(DP), save
|
| DelTimeCalcTransValue : | real(DP)
|
| DelTimeCalcTransUnit : | character(STRING)
|
| flag_save_time : | logical , save
|
This namelist group name is input/output in
rad_Earth_LW_V2_4#RadEarthLWV24Init
rad_Earth_SW_V2_1_nml( FlagRayleighScattering, CloudWatREff, CloudIceREff )
| NAMELIST : |
|
| FlagRayleighScattering : | logical , save
|
| CloudWatREff : | real(DP), save
|
| CloudIceREff : | real(DP), save
|
デフォルト値については初期化手続
"rad_Earth_SW_V2_1#RadEarthSWV21Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_Earth_SW_V2_1#RadEarthSWEV21Init" for the default values.
This namelist group name is input/output in
rad_Earth_SW_V2_1#RadEarthSWV21Init
rad_Earth_SW_V2_2_nml( FlagRayleighScattering, SolarConst, CloudWatREff, CloudIceREff )
| NAMELIST : |
|
| FlagRayleighScattering : | logical , save
|
| SolarConst : | real(DP), save
|
| CloudWatREff : | real(DP), save
|
| CloudIceREff : | real(DP), save
|
デフォルト値については初期化手続
"rad_Earth_SW_V2_2#RadEarthSWV22Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_Earth_SW_V2_2#RadEarthSWEV22Init" for the default values.
This namelist group name is input/output in
rad_Earth_SW_V2_2#RadEarthSWV22Init
rad_Mars_15m_nml( rad15mkg_fn, Rad15mInt )
| NAMELIST : |
|
| rad15mkg_fn : | character(STRING)
|
| Rad15mInt : | real(DP) , save
|
実行文 ; Executable statement
This namelist group name is input/output in
rad_Mars_15m#RadMars15mInit
rad_Mars_NIR_nml( FlagUse )
rad_Mars_V1_nml( SolarConst, FlagRadActiveDust )
| NAMELIST : |
|
| SolarConst : | real(DP), save
| : | Solar radiation at the distance of semi-major axis
|
|
| FlagRadActiveDust : | logical, save
|
デフォルト値については初期化手続 "rad_Mars_V1#RadMarsV1Init"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_Mars_V1#RadMarsV1Init" for the default values.
This namelist group name is input/output in
rad_Mars_V1#RadMarsV1Init
rad_SL09_nml( FlagGMIns, SWOptDepAtRefPress, SWRefPress, SWOrd, LWOptDepAtRefPress, LWRefPress, LWOrd, SolarConst )
| NAMELIST : |
|
| FlagGMIns : | logical, save
|
| SWOptDepAtRefPress : | real(DP), save
|
| SWRefPress : | real(DP), save
|
| SWOrd : | real(DP), save
|
| LWOptDepAtRefPress : | real(DP), save
|
| LWRefPress : | real(DP), save
|
| LWOrd : | real(DP), save
|
| SolarConst : | real(DP), save
|
デフォルト値については初期化手続 "rad_SL09#RadSL09Init"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_SL09#RadSL09Init" for the default values.
This namelist group name is input/output in
rad_SL09#RadSL09Init
rad_rte_nonscat_nml( DiffFact, NumGaussNodeZAInt )
rad_short_income_nml( FlagRadSynchronous, FlagAnnualMean, FlagDiurnalMean, FlagPerpetual, PerpDelDeg, PerpDistFromStarScld, EpsOrb, PerLonFromVE, LonFromVEAtEpoch, Eccentricity, TimeAtEpoch, EpochYear, EpochMonth, EpochDay, EpochHour, EpochMin, EpochSec, MaxItrEccAnomaly, ThreEccAnomalyError, IncomAIns, IncomBIns, IncomAZet, IncomBZet, FlagSpecifySolDay, SolDayValue, SolDayUnit )
| NAMELIST : |
|
| FlagRadSynchronous : | logical
| : | 同期回転日射のフラグ Flag for synchronous rotation
|
|
| FlagAnnualMean : | logical, save
| : | 年平均入射フラグ. Flag for annual mean incoming radiation.
|
|
| FlagDiurnalMean : | logical, save
| : | 日平均入射フラグ. Flag for diurnal mean incoming radiation.
|
|
| FlagPerpetual : | logical, save
| : | 季節変化なし入射フラグ. Flag for perpetual incoming radiation.
|
|
| PerpDelDeg : | real(DP)
| : | Declination angle in degree used for perpetual experiment
|
|
| PerpDistFromStarScld : | real(DP), save
| : | distance between a planet and a central star for perpetual experiment
|
|
| EpsOrb : | real(DP), save
| : | 赤道傾斜角. Inclination of equator to orbit.
|
|
| PerLonFromVE : | real(DP), save
| : | 春分から測った近日点の経度 (近日点黄経) (degree) Longitude of the
perihelion from vernal equinox (degree)
|
|
| LonFromVEAtEpoch : | real(DP), save
| : | 元期における惑星の経度 (黄経) (degree) Longitude of the planet at epoch
(degree)
|
|
| Eccentricity : | real(DP), save
|
| TimeAtEpoch : | real(DP), save
| : | 元期における時刻 (sec) Time at epoch (sec)
|
|
| EpochYear : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochMonth : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochDay : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochHour : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochMin : | integer
| : | 元期日時 (年月日時分). "TimeAtEpoch"
が負の場合にこちらが使用される.
Date at epoch (year, month, day, hour, minute) These are used when
"TimeAtEpoch" is negative.
|
|
| EpochSec : | real(DP)
| : | 元期日時 (秒). "TimeAtEpoch" が負の場合にこちらが使用される.
Date at epoch (second) These are used when "TimeAtEpoch" is
negative.
|
|
| MaxItrEccAnomaly : | integer, save
| : | 離心近点角を計算する時の最大繰り返し回数. Maximum iteration number of
times to calculate eccentric anomaly.
|
|
| ThreEccAnomalyError : | real(DP), save
| : | 離心近点角を計算する時の誤差の許容しきい値. Threshold of error to
calculate eccentric anomaly.
|
|
| IncomAIns : | real(DP), save
| : | $ A_{ins} $ . 年平均入射の係数. Coefficient of annual mean incoming
radiation.
|
|
| IncomBIns : | real(DP), save
| : | $ B_{ins} $ . 年平均入射の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
| IncomAZet : | real(DP), save
| : | $ A_{zeta} $ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
| IncomBZet : | real(DP), save
| : | $ B_{zeta} $ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean
incoming radiation. Same as "AIns".
|
|
| FlagSpecifySolDay : | logical, save
| : | Flag for specifying solar day
|
|
| SolDayValue : | real(DP)
|
| SolDayUnit : | character(TOKEN)
|
デフォルト値については初期化手続 "rad_short_income#RadShortIncomeInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "rad_short_income#RadShortIncomeInit"
for the default values.
This namelist group name is input/output in rad_short_income#RadShortIncomeInit
rad_simple_LW_nml( nbmax, WNBnds, AbsCoefDryCom, PressScaleIndDryCom, RefPressDryCom, AbsCoefH2OVap, PressScaleIndH2OVap, RefPressH2OVap, DiffFact, NumGaussNode )
| NAMELIST : |
|
| nbmax : | integer , save
| : | 長波バンド数. Number of long wave band
|
|
| WNBnds(0:MaxNmlArySize) : | real(DP)
|
| AbsCoefDryCom(1:MaxNmlArySize) : | real(DP)
|
| PressScaleIndDryCom(1:MaxNmlArySize) : | real(DP)
|
| RefPressDryCom(1:MaxNmlArySize) : | real(DP)
|
| AbsCoefH2OVap(1:MaxNmlArySize) : | real(DP)
|
| PressScaleIndH2OVap(1:MaxNmlArySize) : | real(DP)
|
| RefPressH2OVap(1:MaxNmlArySize) : | real(DP)
|
| DiffFact : | real(DP), save
|
| NumGaussNode : | integer , save
|
デフォルト値については初期化手続 "rad_DennouAGCM#RadInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_DennouAGCM#RadInit" for the default values.
This namelist group name is input/output in
rad_simple_LW#RadSimpleLWInit
read_time_series_nml( FlagYearCyclic )
relaxed_arakawa_schubert( AdjTimeConst, RainConversionFactor, FlagZeroCrtlCWF )
| NAMELIST : |
|
| AdjTimeConst : | real(DP), save
| : | Time constant for adjustment
|
|
| RainConversionFactor : | real(DP), save
| : | Factor for conversion of detrained water vapor (liquid water ) to rain
|
|
| FlagZeroCrtlCWF : | logical , save
| : | Flag for zero critical cloud work function
|
|
デフォルト値については初期化手続 "moist_conv_adjust#CumAdjInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "moist_conv_adjust#MoistConvAdjustInit"
for the default values.
This namelist group name is input/output in relaxed_arakawa_schubert#RelaxedArakawaSchubertInit
restart_file_io_nml( InputFile, OutputFile, IntValue, IntUnit )
| NAMELIST : |
|
| InputFile : | character(STRING), save, public
| : | 入力するリスタートデータのファイル名 Filename of input restart data
|
|
| OutputFile : | character(STRING), save, public
| : | 出力するリスタートデータのファイル名 Filename of output restart data
|
|
| IntValue : | real(DP), save, public
| : | リスタートデータの出力間隔 (数値). Interval of restart data output
(numerical value)
|
|
| IntUnit : | character(TOKEN), save, public
| : | リスタートデータの出力間隔 (単位). Interval of restart data output (unit)
|
|
デフォルト値については初期化手続 "restart_file_io#RestartFileInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "restart_file_io#RestartFileInit"
for the default values.
This namelist group name is input/output in restart_file_io#RestartFileInit
restart_surftemp_io_nml( InputFile, OutputFile, IntValue, IntUnit )
roughlen_Matthews_nml( RoughLenOcean, RoughLenIce )
| NAMELIST : |
|
| RoughLenOcean : | real(DP) , save
|
| RoughLenIce : | real(DP) , save
|
実行文 ; Executable statement
This namelist group name is input/output in
roughlen_Matthews#RoughLenMatthewsInit
set_1d_profile_nml( InFileName, PressName, TempName, H2OVapName, O3Name )
set_Mars_dust_nml( DustExtEff, REff, RhoDust, DustScenario, DODFileName, DODVarName, DOD067, DustVerDistCoef, DustOptDepRefPress, DustVerDistRefPress )
| NAMELIST : |
|
| DustExtEff : | real(DP), save
|
| REff : | real(DP), save
|
| RhoDust : | real(DP), save
|
| DustScenario : | character(STRING), save
|
| DODFileName : | character(STRING), save
|
| DODVarName : | character(STRING), save
|
| DOD067 : | real(DP) , save
| : | Dust optical depth at 0.67 micron.
|
|
| DustVerDistCoef : | real(DP) , save
|
| DustOptDepRefPress : | real(DP) , save
|
| DustVerDistRefPress : | real(DP) , save
|
デフォルト値については初期化手続 "rad_Mars_V1#RadMarsV1Init"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"rad_Mars_V1#RadMarsV1Init" for the default values.
This namelist group name is input/output in
set_Mars_dust#SetMarsDustInit
set_O3_nml( FlagO3, Flag1D, O3File )
set_gcmr_nml( MRCO2, CO2File, CO2Name, MRN2O, N2OFile, N2OName, MRCH4, CH4File, CH4Name )
| NAMELIST : |
|
| MRCO2 : | real(DP), save
|
| CO2File : | character(STRING), save
|
| CO2Name : | character(STRING), save
|
| MRN2O : | real(DP), save
|
| N2OFile : | character(STRING), save
|
| N2OName : | character(STRING), save
|
| MRCH4 : | real(DP), save
|
| CH4File : | character(STRING), save
|
| CH4Name : | character(STRING), save
|
デフォルト値については初期化手続 "set_gcmr#SetGCMRInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "set_gcmr#SetGCMRInit" for the default
values.
This namelist group name is input/output in set_gcmr#SetGCMRInit
set_solarconst_nml( SolarConst, SolarConstFile, SolarConstVarName )
sl09_diffusion_nml( SigmaB, kfTimeScaleInDay, FrictionLBLat, LBHeatFlux, SurfQMixDiffCoef, SurfQVap )
sltt_nml( FlagSLTTArcsine, SLTTIntHor, SLTTIntVer )
| NAMELIST : |
|
| FlagSLTTArcsine : | logical, save
| : | Arcsine変換の非負フィルタフラグ Flag for non-negative filter using arcsine
trasformation
|
|
| SLTTIntHor : | character(TOKEN), save
| : | 水平方向の補間方法を指定するキーワード Keyword for Interpolation Method
for Horizontal direction
|
|
| SLTTIntVer : | character(TOKEN), save
| : | 鉛直方向の補間方法を指定するキーワード Keyword for Interpolation Method
for Vertical direction
|
|
実行文 ; Executable statement
This namelist group name is input/output in sltt#SLTTInit
surface_data_nml( Pattern, SurfTemp, Albedo, HumidCoef, RoughLength, HeatCapacity, TempFlux, SurfCond, SeaIceConc, SoilHeatCap, SoilHeatDiffCoef )
| NAMELIST : |
|
| Pattern : | character(STRING), save
| : | 地表面データのパターン. 以下のパターンを選択可能.
Surface data pattern. Available patterns are as follows.
- "Hosaka et al. (1998)"
- "Homogeneous"
|
|
| SurfTemp : | real(DP), save
| : | 地表面温度の基準値. Standard value of surface temperature
|
|
| Albedo : | real(DP), save
|
| HumidCoef : | real(DP), save
| : | 地表湿潤度. Surface humidity coefficient
|
|
| RoughLength : | real(DP), save
| : | 地表粗度長. Surface rough length
|
|
| HeatCapacity : | real(DP), save
| : | 地表熱容量. Surface heat capacity
|
|
| TempFlux : | real(DP), save
| : | 地中熱フラックス. Ground temperature flux
|
|
| SurfCond : | integer, save
| : | 地表状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)
|
|
| SeaIceConc : | real(DP), save
| : | 海氷面密度 Sea ice concentration
|
|
| SoilHeatCap : | real(DP), save
| : | 土壌熱容量 (J K-1 m-3) Specific heat of soil (J K-1 m-3)
|
|
| SoilHeatDiffCoef : | real(DP), save
| : | 土壌熱伝導係数 (W m-1 K-1) Heat conduction coefficient of soil (W m-1 K-1)
|
|
デフォルト値については初期化手続 "surface_data#SurfDataInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_data#SurfDataInit" for
the default values.
This namelist group name is input/output in surface_data#SurfDataInit
surface_flux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, FlagIncludeB94W, VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, VelMaxForVel, VelMaxForTemp, VelMaxForQVap, VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax, FlagFixFricTimeConstAtLB, FricTimeConstAtLB, LowLatFricAtLB, FlagFixHeatFluxAtLB, HeatFluxAtLB, FlagFixMassFluxAtLB, MassFluxAtLB )
| NAMELIST : |
|
| FlagConstBulkCoef : | logical, save
| : | Flag for using constant bulk coefficient
|
|
| FlagUseOfBulkCoefInNeutralCond : | logical, save
| : | Flag for using bulk coefficient in neutral condition
|
|
| ConstBulkCoef : | real(DP), save
| : | バルク係数一定値. Steady value of bulk coefficient
|
|
| FlagIncludeB94W : | logical
|
| VelMinForRi : | real(DP), save
| : | $ R_i $ 数用風最小値. Minimum value of velocity for $ R_i $ number
|
|
| VelMinForVel : | real(DP), save
| : | 運動量用風最小値. Minimum value of velocity for momentum
|
|
| VelMinForTemp : | real(DP), save
| : | 熱用風最小値. Minimum value of velocity for thermal
|
|
| VelMinForQVap : | real(DP), save
| : | 水蒸気用風最小値. Minimum value of velocity for vapor
|
|
| VelMaxForVel : | real(DP), save
| : | 運動量用風最大値. Maximum value of velocity for momentum
|
|
| VelMaxForTemp : | real(DP), save
| : | 熱用風最大値. Maximum value of velocity for thermal
|
|
| VelMaxForQVap : | real(DP), save
| : | 水蒸気用風最大値. Maximum value of velocity for vapor
|
|
| VelBulkCoefMin : | real(DP), save
| : | $ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient
|
|
| TempBulkCoefMin : | real(DP), save
| : | $ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient
|
|
| QVapBulkCoefMin : | real(DP), save
| : | $ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient
|
|
| VelBulkCoefMax : | real(DP), save
| : | $ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient
|
|
| TempBulkCoefMax : | real(DP), save
| : | $ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient
|
|
| QVapBulkCoefMax : | real(DP), save
| : | $ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient
|
|
| FlagFixFricTimeConstAtLB : | logical , save
|
| FricTimeConstAtLB : | real(DP), save
| : | 下部境界摩擦の時定数 (s). Time constant of surface friction (s).
|
|
| LowLatFricAtLB : | real(DP), save
| : | 下部境界摩擦が働く最低緯度 (degree). Lowest latitude where the friction is
applied (degree)
|
|
| FlagFixHeatFluxAtLB : | logical , save
|
| HeatFluxAtLB : | real(DP), save
| : | 下部境界での熱フラックス (W m-2). Heat flux at the lower boundary (W m-2).
|
|
| FlagFixMassFluxAtLB : | logical , save
|
| MassFluxAtLB : | real(DP), save
| : | 下部境界での質量フラックス (W m-2).
実際にはゼロに固定するために使う程度にしか使えないだろう. Mass flux at the
lower boundary (kg m-2 s-1).
|
|
デフォルト値については初期化手続 "surface_flux_bulk#SurfaceFluxInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_flux_bulk#SurfaceFluxInit"
for the default values.
This namelist group name is input/output in surface_flux_bulk#SurfaceFluxInit
surface_properties_lo_nml( AlbedoLand, AlbedoOcean, RoughLenLand, RoughLenOcean )
surface_properties_nml( SurfTempSetting, SurfTempFile, SurfTempName, SeaIceSetting, SeaIceFile, SeaIceName, AlbedoSetting, AlbedoFile, AlbedoName, HumidCoefSetting, HumidCoefFile, HumidCoefName, RoughLengthSetting, RoughLengthFile, RoughLengthName, HeatCapacitySetting, HeatCapacityFile, HeatCapacityName, TempFluxSetting, TempFluxFile, TempFluxName, SurfCondSetting, SurfCondFile, SurfCondName, SurfTypeSetting, SurfTypeFile, SurfTypeName, SurfCulIntSetting, SurfCulIntFile, SurfCulIntName, SurfHeightSetting, SurfHeightFile, SurfHeightName, SoilHeatCapSetting, SoilHeatCapFile, SoilHeatCapName, SoilHeatDiffCoefSetting, SoilHeatDiffCoefFile, SoilHeatDiffCoefName )
| NAMELIST : |
|
| SurfTempSetting : | character(STRING), save
| : | 地表面温度の設定方法 Setting of surface temperature
|
|
| SurfTempFile : | character(STRING), save
| : | 地表面温度のファイル名. File name of surface temperature
|
|
| SurfTempName : | character(TOKEN) , save
| : | 地表面温度の変数名. Variable name of surface temperature
|
|
| SeaIceSetting : | character(STRING), save
| : | 海氷面密度の設定方法 Setting of sea ice concentration
|
|
| SeaIceFile : | character(STRING), save
| : | 海氷面密度のファイル名. File name of sea ice concentration
|
|
| SeaIceName : | character(TOKEN) , save
| : | 海氷面密度の変数名. Variable name of sea ice concentration
|
|
| AlbedoSetting : | character(STRING), save
| : | 地表アルベドの設定方法 Settingof surface albedo
|
|
| AlbedoFile : | character(STRING), save
| : | 地表アルベドのファイル名. File name of surface albedo
|
|
| AlbedoName : | character(TOKEN) , save
| : | 地表アルベドの変数名. Variable name of surface albedo
|
|
| HumidCoefSetting : | character(STRING), save
| : | 地表湿潤度の設定方法 Setting of surface humidity coefficient
|
|
| HumidCoefFile : | character(STRING), save
| : | 地表湿潤度のファイル名. File name of surface humidity coefficient
|
|
| HumidCoefName : | character(TOKEN) , save
| : | 地表湿潤度の変数名. Variable name of surface humidity coefficient
|
|
| RoughLengthSetting : | character(STRING), save
| : | 地表粗度長の設定方法 Setting of surface rough length
|
|
| RoughLengthFile : | character(STRING), save
| : | 地表粗度長のファイル名. File name of surface rough length
|
|
| RoughLengthName : | character(TOKEN) , save
| : | 地表粗度長の変数名. Variable name of surface rough length
|
|
| HeatCapacitySetting : | character(STRING), save
| : | 地表熱容量の設定方法 Setting of surface heat capacity
|
|
| HeatCapacityFile : | character(STRING), save
| : | 地表熱容量のファイル名. File name of surface heat capacity
|
|
| HeatCapacityName : | character(TOKEN) , save
| : | 地表熱容量の変数名. Variable name of surface heat capacity
|
|
| TempFluxSetting : | character(STRING), save
| : | 地中熱フラックスの設定方法 Setting of ground temperature flux
|
|
| TempFluxFile : | character(STRING), save
| : | 地中熱フラックスのファイル名. File name of ground temperature flux
|
|
| TempFluxName : | character(TOKEN) , save
| : | 地中熱フラックスの変数名. Variable name of ground temperature flux
|
|
| SurfCondSetting : | character(STRING), save
| : | 惑星表面状態の設定方法 Setting of surface condition
|
|
| SurfCondFile : | character(STRING), save
| : | 惑星表面状態のファイル名. File name of surface condition
|
|
| SurfCondName : | character(TOKEN) , save
| : | 惑星表面状態の変数名. Variable name of surface condition
|
|
| SurfTypeSetting : | character(STRING), save
| : | 惑星表面タイプ (土地利用) の設定方法 Setting of surface type (land use)
|
|
| SurfTypeFile : | character(STRING), save
| : | 惑星表面タイプ (土地利用) のファイル名. File name of surface type (land
use)
|
|
| SurfTypeName : | character(TOKEN) , save
| : | 惑星表面タイプ (土地利用) の変数名. Variable name of surface type (land
use)
|
|
| SurfCulIntSetting : | character(STRING), save
| : | … の設定方法 Setting of surface cultivation intensity
|
|
| SurfCulIntFile : | character(STRING), save
| : | … のファイル名. File name of surface cultivation intensity
|
|
| SurfCulIntName : | character(TOKEN) , save
| : | … の変数名. Variable name of surface cultivation intensity
|
|
| SurfHeightSetting : | character(STRING), save
| : | 地表面高度の設定方法 Setting of surface height
|
|
| SurfHeightFile : | character(STRING), save
| : | 地表面高度のファイル名. File name of surface height
|
|
| SurfHeightName : | character(TOKEN) , save
| : | 地表面高度の変数名. Variable name of surface height
|
|
| SoilHeatCapSetting : | character(STRING), save
| : | 土壌熱容量の設定方法 Setting of heat conduction coefficient of soil
|
|
| SoilHeatCapFile : | character(STRING), save
| : | 土壌熱容量のファイル名. File name of heat conduction coefficient of soil
|
|
| SoilHeatCapName : | character(TOKEN) , save
| : | 土壌熱容量の変数名. Variable name of heat conduction coefficient of soil
|
|
| SoilHeatDiffCoefSetting : | character(STRING), save
| : | 土壌熱伝導率の設定方法 Setting of heat conduction coefficient of soil
|
|
| SoilHeatDiffCoefFile : | character(STRING), save
| : | 土壌熱伝導率のファイル名. File name of heat conduction coefficient of soil
|
|
| SoilHeatDiffCoefName : | character(TOKEN) , save
| : | 土壌熱伝導率の変数名. Variable name of heat conduction coefficient of soil
|
|
デフォルト値については初期化手続 "surface_properties#SurfacePropertiesInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "surface_properties#SurfacePropertiesInit"
for the default values.
This namelist group name is input/output in surface_properties#SurfacePropertiesInit
timefilter_asselin1972_nml( FilterParameter )
| NAMELIST : |
|
| FilterParameter : | real(DP), save
| : | タイムフィルターの係数. Time filter coefficient
| !$ integer, save: | IntStep ! タイムフィルターを適用するステップ間隔.
|
!$ ! Step interval of time filter application
| !$ integer, save: | CurStep ! TimeFilter が呼ばれた回数.
|
!$ ! Number of times that "TimeFilter" is called
| !$ integer, save: | PrevStep ! 前回タイムフィルターを適用したステップ数.
|
!$ ! Step number that is filtered previously
|
|
, IntStep
デフォルト値については初期化手続
"timefilter_asselin1972#Hs94Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"timefilter_asselin1972#Hs94Init" for the default values.
This namelist group name is input/output in timefilter_asselin1972#TimeFiltInit
timefilter_williams2009_nml( FilterParameterRA, FilterParameterW )
| NAMELIST : |
|
| FilterParameterRA : | real(DP), save
| : | Robert-Asselin 時間フィルターの係数. Time filter coefficient for
Robert-Asselin filter
|
|
| FilterParameterW : | real(DP), save
| : | Williams 時間フィルターの係数. Time filter coefficient for Williams filter
|
|
デフォルト値については初期化手続
"timefilter_asselin1972#Hs94Init" のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"timefilter_asselin1972#Hs94Init" for the default values.
This namelist group name is input/output in timefilter_williams2009#TimeFilterWilliams2009Init
timeset_nml( cal_type, month_in_year, day_in_month, hour_in_day, min_in_hour, sec_in_min, DelTimeValue, DelTimeUnit, RestartTimeValue, RestartTimeUnit, InitialYear, InitialMonth, InitialDay, InitialHour, InitialMin, InitialSec, EndYear, EndMonth, EndDay, EndHour, EndMin, EndSec, IntegPeriodValue, IntegPeriodUnit, PredictIntValue, PredictIntUnit, CpuTimeMoniter )
| NAMELIST : |
|
| cal_type : | character(TOKEN), save
| : | 暦情報. Type of calendar used for an experiment
|
|
| month_in_year : | integer , save
| : | Number of months in a year which is used when cal_type =
"user_defined"
|
|
| day_in_month(1:MaxNmlArySize) : | integer , save
| : | Number of days in a month which is used when cal_type =
"user_defined"
|
|
| hour_in_day : | integer , save
| : | Number of hours in a day which is used when cal_type =
"user_defined"
|
|
| min_in_hour : | integer , save
| : | Number of minutes in a hour which is used when cal_type =
"user_defined"
|
|
| sec_in_min : | real(DP) , save
| : | Number of seconds in a minute which is used when cal_type =
"user_defined"
|
|
| DelTimeValue : | real(DP) , save
| : | $ Delta t $ . 単位は DelTimeUnit にて指定. Unit is specified by
"DelTimeUnit".
|
|
| DelTimeUnit : | character(TOKEN), save
| : | $ Delta t $ の単位. Unit of $ Delta t $
|
|
| RestartTimeValue : | real(DP) , save
| : | リスタート開始時刻. Restart time of calculation
|
|
| RestartTimeUnit : | character(TOKEN), save
| : | リスタート開始時刻の単位. Unit of restart time of calculation
|
|
| InitialYear : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialMonth : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialDay : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialHour : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialMin : | integer
| : | 計算開始日時 (年月日時分) Start date of calculation (year, month, day,
hour, minute)
|
|
| InitialSec : | real(DP)
| : | 計算開始日時 (秒) Start date of calculation (second)
|
|
| EndYear : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndMonth : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndDay : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndHour : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndMin : | integer
| : | 計算終了日時 (年月日時分). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (year, month, day, hour, minute) These are used
when "IntegPeriodValue" is negative
|
|
| EndSec : | real(DP)
| : | 計算終了日時 (秒). "IntegPeriodValue"
が負の場合にこちらが使用される.
End date of calculation (second) These are used when
"IntegPeriodValue" is negative
|
|
| IntegPeriodValue : | real(DP)
|
| IntegPeriodUnit : | character(TOKEN)
| : | "IntegPeriodValue" の単位. Unit of "IntegPeriodValue".
|
|
| PredictIntValue : | real(DP) , save
| : | 終了予測日時表示間隔. Interval of predicted end time output
|
|
| PredictIntUnit : | character(TOKEN), save
| : | 終了予測日時表示間隔 (単位). Unit for interval of predicted end time
output
|
|
| CpuTimeMoniter : | logical , save
| : | CPU 時間計測のオンオフ On/off of CPU time monitoring
|
|
デフォルト値については初期化手続 "timeset#TimesetInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "timeset#TimesetInit" for the default
values.
This namelist group name is input/output in timeset#TimesetInit
vdiffusion_my_nml( FlagConstDiffCoef, ConstDiffCoefM, ConstDiffCoefH, SquareVelMin, BulkRiNumMin, MixLengthMax, ShMin, SmMin, VelDiffCoefMin, TempDiffCoefMin, VelDiffCoefMax, TempDiffCoefMax, MYConstA1, MYConstB1, MYConstA2, MYConstB2, MYConstC1 )
| NAMELIST : |
|
| FlagConstDiffCoef : | logical , save
| : | Flag for use of constant diffusion coefficient
|
|
| ConstDiffCoefM : | real(DP), save
| : | Diffusion coefficient for momentum that is used in the case of
FlagConstDiffCoef == .true.
|
|
| ConstDiffCoefH : | real(DP), save
| : | Diffusion coefficient for heat that is used in the case of
FlagConstDiffCoef == .true.
|
|
| SquareVelMin : | real(DP), save
| : | 風二乗差最小値. Minimum value of square of velocity
|
|
| BulkRiNumMin : | real(DP), save
| : | バルク $ R_i $ 数最小値. Minimum value of bulk $ R_i $
|
|
| MixLengthMax : | real(DP), save
| : | 最大混合距離. Maximum mixing length
|
|
| ShMin : | real(DP), save
| : | $ S_h $ 最小値. Minimum $ S_h $
|
|
| SmMin : | real(DP), save
| : | $ S_m $ 最小値. Minimum $ S_m $
|
|
| VelDiffCoefMin : | real(DP), save
| : | $ Dvect{u} $ 拡散係数最小値. Minimum diffusion coefficient of $ Dvect{u} $
|
|
| TempDiffCoefMin : | real(DP), save
| : | $ T $ 拡散係数最小値. Minimum diffusion coefficient of $ T $
|
|
| VelDiffCoefMax : | real(DP), save
| : | $ Dvect{u} $ 拡散係数最大値. Maximum diffusion coefficient of $ Dvect{u} $
|
|
| TempDiffCoefMax : | real(DP), save
| : | $ T $ 拡散係数最大値. Maximum diffusion coefficient of $ T $
|
|
| MYConstA1 : | real(DP), save
|
| MYConstB1 : | real(DP), save
|
| MYConstA2 : | real(DP), save
|
| MYConstB2 : | real(DP), save
|
| MYConstC1 : | real(DP), save
|
デフォルト値については初期化手続 "vdiffusion_my#VDiffInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"vdiffusion_my#VDiffInit" for the default values.
This namelist group name is input/output in vdiffusion_my#VDiffusionInit
venus_simple_forcing_nml( SurfFrictionTimeConstInEarthDay, FlagConstNCC, ConstNCCInEarthDay )
| NAMELIST : |
|
| SurfFrictionTimeConstInEarthDay : | real(DP), save
|
| FlagConstNCC : | logical , save
|
| ConstNCCInEarthDay : | real(DP), save
|
デフォルト値については初期化手続
"venus_simple_forcing#YT2003ForcingInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure
"venus_simple_forcing#YT2003ForcingInit" for the default values.
This namelist group name is input/output in yt2003_forcing#YT2003ForcingInit
vertical_filter_nml( FilterParameter )
| NAMELIST : |
|
| FilterParameter : | real(DP), save
| : | 鉛直フィルターの係数. Vertical filter coefficient
| !$ integer, save: | IntStep ! 鉛直フィルターを適用するステップ間隔.
|
!$ ! Step interval of vertical filter application
| !$ integer, save: | CurStep ! VerticalFilter が呼ばれた回数.
|
!$ ! Number of times that "VerticalFilter" is called
| !$ integer, save: | PrevStep ! 前回鉛直フィルターを適用したステップ数.
|
!$ ! Step number that is filtered previously
|
|
, IntStep
デフォルト値については初期化手続 "vertical_filter#VerticalFilterInit"
のソースコードを参照のこと.
Refer to source codes in the initialization procedure "vertical_filter#VerticalFilterInit"
for the default values.
This namelist group name is input/output in vertical_filter#VerticalFilterInit