Class Bucket_Model
In: surface_flux/bucket_model.f90

Methods

Included Modules

dc_types timeset gridset constants_snowseaice constants namelist_util dc_iounit dc_string dc_message

Public Instance methods

Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xy_SurfEvapFlux( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoistB( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfSnowB( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoistA( 0:imax-1, 1:jmax ) :real(DP), intent(out)
xy_SurfSnowA( 0:imax-1, 1:jmax ) :real(DP), intent(out)

[Source]

  subroutine BucketEvap( xy_SurfCond, xy_SurfEvapFlux, xy_SoilMoistB, xy_SurfSnowB, xy_SoilMoistA, xy_SurfSnowA )

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimesetClockStart, TimesetClockStop

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    ! 雪と海氷の定数の設定
    ! Setting constants of snow and sea ice
    !
    use constants_snowseaice, only: ThresholdSurfSnow, TempCondWater

    integer , intent(in ) :: xy_SurfCond    ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SurfEvapFlux( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SoilMoistB  ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SurfSnowB   ( 0:imax-1, 1:jmax )
    real(DP), intent(out) :: xy_SoilMoistA  ( 0:imax-1, 1:jmax )
    real(DP), intent(out) :: xy_SurfSnowA   ( 0:imax-1, 1:jmax )

    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )

    ! 初期化
    ! Initialization
    !
    if ( .not. bucket_model_inited ) call BucketInit

    if ( .not. FlagBucketModel ) then
      xy_SoilMoistA = xy_SoilMoistB
      xy_SurfSnowA  = xy_SurfSnowB
      return
    end if


    if ( FlagBucketModelSnow ) then
      ! Evaporation is subtracted from surface snow and soil moisture
      !
      xy_SurfSnowA = xy_SurfSnowB - xy_SurfEvapFlux * 2.0d0 * DelTime
      do j = 1, jmax
        do i = 0, imax-1
          if ( xy_SurfSnowA(i,j) < 0.0d0 ) then
            xy_SoilMoistA(i,j) = xy_SoilMoistB(i,j) + xy_SurfSnowA(i,j)
            xy_SurfSnowA (i,j) = 0.0d0
          else
            xy_SoilMoistA(i,j) = xy_SoilMoistB(i,j)
          end if
        end do
      end do
    else
      ! Evaporation is subtracted from soil moisture
      !
      xy_SoilMoistA = xy_SoilMoistB - xy_SurfEvapFlux * 2.0d0 * DelTime
      xy_SurfSnowA  = xy_SurfSnowB
    end if

    ! Remove negative values
    !
    do j = 1, jmax
      do i = 0, imax-1
        if( xy_SoilMoistA(i,j) < 0.0d0 ) xy_SoilMoistA(i,j) = 0.0d0
        if( xy_SurfSnowA (i,j) < 0.0d0 ) xy_SurfSnowA (i,j) = 0.0d0
      end do
    end do

    ! Fill meaningless value in ocean grid
    !
    do j = 1, jmax
      do i = 0, imax-1
        if ( xy_SurfCond( i, j ) == 0 ) then
          xy_SoilMoistA(i,j) = SoilMoistMeaningLess
          xy_SurfSnowA(i,j)  = SoilMoistMeaningLess
        end if
      end do
    end do

    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )


  end subroutine BucketEvap
Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xy_SurfEvapFlux( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoist( 0:imax-1, 1:jmax ) :real(DP), intent(inout)
xy_SurfSnow( 0:imax-1, 1:jmax ) :real(DP), intent(inout)

[Source]

  subroutine BucketEvapAdjust( xy_SurfCond, xy_SurfEvapFlux, xy_SoilMoist, xy_SurfSnow )

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    integer , intent(in   ) :: xy_SurfCond    ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xy_SurfEvapFlux( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SoilMoist   ( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SurfSnow    ( 0:imax-1, 1:jmax )

    ! 作業変数
    ! Work variables
    !
    real(DP) :: xy_SoilMoistB( 0:imax-1, 1:jmax )
    real(DP) :: xy_SurfSnowB ( 0:imax-1, 1:jmax )
    real(DP) :: xy_SoilMoistA( 0:imax-1, 1:jmax )
    real(DP) :: xy_SurfSnowA ( 0:imax-1, 1:jmax )


    xy_SoilMoistB = xy_SoilMoist
    xy_SurfSnowB  = xy_SurfSnow

    call BucketEvap( xy_SurfCond, xy_SurfEvapFlux, xy_SoilMoistB, xy_SurfSnowB, xy_SoilMoistA, xy_SurfSnowA )

    xy_SoilMoist = xy_SoilMoistA
    xy_SurfSnow  = xy_SurfSnowA


  end subroutine BucketEvapAdjust
Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xy_DSoilMoistDt( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_DSurfSnowDt( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoistB( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfSnowB( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoistA( 0:imax-1, 1:jmax ) :real(DP), intent(out)
xy_SurfSnowA( 0:imax-1, 1:jmax ) :real(DP), intent(out)

[Source]

  subroutine BucketIntegration( xy_SurfCond, xy_DSoilMoistDt, xy_DSurfSnowDt, xy_SoilMoistB, xy_SurfSnowB, xy_SoilMoistA, xy_SurfSnowA )

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimesetClockStart, TimesetClockStop

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    ! 雪と海氷の定数の設定
    ! Setting constants of snow and sea ice
    !
    use constants_snowseaice, only: ThresholdSurfSnow, TempCondWater

    integer , intent(in ) :: xy_SurfCond    ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_DSoilMoistDt( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_DSurfSnowDt ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SoilMoistB  ( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xy_SurfSnowB   ( 0:imax-1, 1:jmax )
    real(DP), intent(out) :: xy_SoilMoistA  ( 0:imax-1, 1:jmax )
    real(DP), intent(out) :: xy_SurfSnowA   ( 0:imax-1, 1:jmax )

    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )

    ! 初期化
    ! Initialization
    !
    if ( .not. bucket_model_inited ) call BucketInit

    if ( .not. FlagBucketModel ) then
      xy_SoilMoistA = xy_SoilMoistB
      xy_SurfSnowA  = xy_SurfSnowB
      return
    end if


    xy_SoilMoistA = xy_SoilMoistB + xy_DSoilMoistDt * 2.0d0 * DelTime

    ! Remove negative values
    !
    do j = 1, jmax
      do i = 0, imax-1
        if( xy_SoilMoistA(i,j) < 0.0d0 ) xy_SoilMoistA(i,j) = 0.0d0
      end do
    end do

    if ( FlagBucketModelSnow ) then
      xy_SurfSnowA = xy_SurfSnowB + xy_DSurfSnowDt * 2.0d0 * DelTime

      ! Remove negative values
      !
      do j = 1, jmax
        do i = 0, imax-1
          if( xy_SurfSnowA (i,j) < 0.0d0 ) xy_SurfSnowA (i,j) = 0.0d0
        end do
      end do
    else
      xy_SurfSnowA = xy_SurfSnowB
    end if


    ! Fill meaningless value in ocean grid
    !
    do j = 1, jmax
      do i = 0, imax-1
        if ( xy_SurfCond( i, j ) == 0 ) then
          xy_SoilMoistA(i,j) = SoilMoistMeaningLess
          xy_SurfSnowA(i,j)  = SoilMoistMeaningLess
        end if
      end do
    end do


    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )


  end subroutine BucketIntegration
Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xy_SoilMoist( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfSnow( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfHumidCoef( 0:imax-1, 1:jmax ) :real(DP), intent(inout)

[Source]

  subroutine BucketModHumidCoef( xy_SurfCond, xy_SoilMoist, xy_SurfSnow, xy_SurfHumidCoef )

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime            ! $ \Delta t $ [s]

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    ! 雪と海氷の定数の設定
    ! Setting constants of snow and sea ice
    !
    use constants_snowseaice, only: ThresholdSurfSnow

    integer , intent(in   ) :: xy_SurfCond     ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xy_SoilMoist    ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xy_SurfSnow     ( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SurfHumidCoef( 0:imax-1, 1:jmax )


    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude

    ! 初期化
    ! Initialization
    !
    if ( .not. bucket_model_inited ) call BucketInit

    if ( .not. FlagBucketModel ) return


    ! Surface humidity coefficient is modified.
    !
    if ( FlagBucketModelSnow ) then
      do j = 1, jmax
        do i = 0, imax-1
          if ( xy_SurfCond(i,j) == 0 ) then
            xy_SurfHumidCoef(i,j) = xy_SurfHumidCoef(i,j)
          else if ( xy_SurfSnow(i,j) > ThresholdSurfSnow ) then
            xy_SurfHumidCoef(i,j) = 1.0d0
          else
            xy_SurfHumidCoef(i,j) = xy_SoilMoist(i,j) / SoilMoistCritAmntforEvapEff
            if ( xy_SurfHumidCoef(i,j) > 1.0d0 ) xy_SurfHumidCoef(i,j) = 1.0d0
          end if
        end do
      end do
    else
      do j = 1, jmax
        do i = 0, imax-1
          if ( xy_SurfCond(i,j) == 0 ) then
            xy_SurfHumidCoef(i,j) = xy_SurfHumidCoef(i,j)
          else
            xy_SurfHumidCoef(i,j) = xy_SoilMoist(i,j) / SoilMoistCritAmntforEvapEff
            if ( xy_SurfHumidCoef(i,j) > 1.0d0 ) xy_SurfHumidCoef(i,j) = 1.0d0
          end if
        end do
      end do
    end if


  end subroutine BucketModHumidCoef
Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xy_SoilMoist( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfSnow( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SurfEvapFlux( 0:imax-1, 1:jmax ) :real(DP), intent(inout)

[Source]

  subroutine BucketModQvapFlux( xy_SurfCond, xy_SoilMoist, xy_SurfSnow, xy_SurfEvapFlux )

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimesetClockStart, TimesetClockStop

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    integer , intent(in   ) :: xy_SurfCond     ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xy_SoilMoist    ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xy_SurfSnow     ( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SurfEvapFlux ( 0:imax-1, 1:jmax )


    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    ! 初期化
    ! Initialization
    !
    if ( .not. bucket_model_inited ) call BucketInit

    if ( .not. FlagBucketModel ) return


    if ( FlagBucketModelSnow ) then
      ! Surface water vapor flux is limited up to the water and snow amount on the land. 
      !
      do j = 1, jmax
        do i = 0, imax-1
          if ( ( xy_SurfCond    (i,j)                   >= 1      ) .and. ( xy_SurfEvapFlux(i,j)                   >  0.0d0  ) .and. ( xy_SurfEvapFlux(i,j) * 2.0d0 * DelTime > xy_SoilMoist(i,j) + xy_SurfSnow(i,j)          ) ) then
            xy_SurfEvapFlux(i,j) = ( xy_SoilMoist(i,j) + xy_SurfSnow(i,j) ) / ( 2.0d0 * DelTime )
          end if
        end do
      end do
    else
      ! Surface water vapor flux is limited up to the water amount on the land. 
      !
      do j = 1, jmax
        do i = 0, imax-1
          if ( ( xy_SurfCond    (i,j)                   >= 1                 ) .and. ( xy_SurfEvapFlux(i,j)                   >  0.0d0             ) .and. ( xy_SurfEvapFlux(i,j) * 2.0d0 * DelTime >  xy_SoilMoist(i,j) ) ) then
            xy_SurfEvapFlux(i,j) = xy_SoilMoist(i,j) / ( 2.0d0 * DelTime )
          end if
        end do
      end do
    end if

    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )


  end subroutine BucketModQvapFlux
Subroutine :
xy_SurfCond( 0:imax-1, 1:jmax ) :integer , intent(in )
xyz_Temp( 0:imax-1, 1:jmax, 1:kmax ) :real(DP), intent(in )
xy_SurfPrepFlux( 0:imax-1, 1:jmax ) :real(DP), intent(in )
xy_SoilMoist( 0:imax-1, 1:jmax ) :real(DP), intent(inout)
xy_SurfSnow( 0:imax-1, 1:jmax ) :real(DP), intent(inout)

[Source]

  subroutine BucketPrepAdjust( xy_SurfCond, xyz_Temp, xy_SurfPrepFlux, xy_SoilMoist, xy_SurfSnow )

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimesetClockStart, TimesetClockStop

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: imax, jmax, kmax    ! 鉛直層数.
                               ! Number of vertical level

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: LatentHeat

    ! 雪と海氷の定数の設定
    ! Setting constants of snow and sea ice
    !
    use constants_snowseaice, only: TempCondWater

    integer , intent(in   ) :: xy_SurfCond    ( 0:imax-1, 1:jmax )
    real(DP), intent(in   ) :: xyz_Temp       ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in   ) :: xy_SurfPrepFlux( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SoilMoist   ( 0:imax-1, 1:jmax )
    real(DP), intent(inout) :: xy_SurfSnow    ( 0:imax-1, 1:jmax )


    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )

    ! 初期化
    ! Initialization
    !
    if ( .not. bucket_model_inited ) call BucketInit

    if ( .not. FlagBucketModel ) return


    if ( FlagBucketModelSnow ) then
      ! Precipitation is added to soil moisture or surface snow
      !
      do j = 1, jmax
        do i = 0, imax-1
          if ( xyz_Temp(i,j,1) > TempCondWater ) then
            xy_SoilMoist(i,j) = xy_SoilMoist(i,j) + xy_SurfPrepFlux(i,j) * 2.0d0 * DelTime
          else
            xy_SurfSnow (i,j) = xy_SurfSnow (i,j) + xy_SurfPrepFlux(i,j) * 2.0d0 * DelTime
          end if
        end do
      end do
    else
      ! Precipitation is added to soil moisture
      !
      xy_SoilMoist = xy_SoilMoist + xy_SurfPrepFlux * 2.0d0 * DelTime
    end if

    ! Calculation of Run-off
    !
    do j = 1, jmax
      do i = 0, imax-1
        if ( xy_SoilMoist(i,j) > SoilMoistCritAmnt ) xy_SoilMoist(i,j) = SoilMoistCritAmnt
      end do
    end do

    ! Fill meaningless value in ocean grid
    !
    do j = 1, jmax
      do i = 0, imax-1
        if ( xy_SurfCond(i,j) == 0 ) then
          xy_SoilMoist(i,j) = SoilMoistMeaningLess
          xy_SurfSnow (i,j) = SoilMoistMeaningLess
        end if
      end do
    end do

    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )

  end subroutine BucketPrepAdjust
FlagBucketModel
Variable :
FlagBucketModel :logical, save, public
: バケツモデル オン/オフ. bucket model on/off.
FlagBucketModelSnow
Variable :
FlagBucketModelSnow :logical, save, public
: バケツモデル 雪の扱い オン/オフ. bucket model treatment of snow on/off.

Private Instance methods

Subroutine :

bucket_model モジュールの初期化を行います. NAMELIST#bucket_model_nml の読み込みはこの手続きで行われます.

"bucket_model" module is initialized. "NAMELIST#bucket_model_nml" is loaded in this procedure.

This procedure input/output NAMELIST#bucket_model_nml .

[Source]

  subroutine BucketInit
    !
    ! bucket_model モジュールの初期化を行います. 
    ! NAMELIST#bucket_model_nml の読み込みはこの手続きで行われます. 
    !
    ! "bucket_model" module is initialized. 
    ! "NAMELIST#bucket_model_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: StoA

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify


    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /bucket_model_nml/ FlagBucketModel, SoilMoistCritAmnt, SoilMoistCritAmntforEvapEff, FlagBucketModelSnow


    ! 実行文 ; Executable statement
    !

    if ( bucket_model_inited ) return
!!$    call InitCheck

    ! デフォルト値の設定
    ! Default values settings
    !
    FlagBucketModel              = .false.

    SoilMoistCritAmnt            = 1.0d3 * 0.15d0
    SoilMoistCritAmntforEvapEff  = 1.0d3 * 0.15d0 * 0.75d0

    FlagBucketModelSnow           = .false.


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = bucket_model_nml, iostat = iostat_nml )        ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    if ( ( FlagBucketModelSnow ) .and. ( .not. FlagBucketModel ) ) then
      call MessageNotify( 'E', module_name, 'FlagBucketModel has to be true, when FlagBucketModelSnow is true.' )
    end if


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )

    call MessageNotify( 'M', module_name, '  FlagBucketModel             = %y', l = (/ FlagBucketModel   /) )
    call MessageNotify( 'M', module_name, '  SoilMoistCritAmnt           = %f', d = (/ SoilMoistCritAmnt  /) )
    call MessageNotify( 'M', module_name, '  SoilMoistCritAmntforEvapEff = %f', d = (/ SoilMoistCritAmntforEvapEff /) )
    call MessageNotify( 'M', module_name, '  FlagBucketModelSnow         = %y', l = (/ FlagBucketModelSnow /) )


    bucket_model_inited = .true.


  end subroutine BucketInit
SoilMoistCritAmnt
Variable :
SoilMoistCritAmnt :real(DP), save
: <Japanese> Critical amount of soil moisture
SoilMoistCritAmntforEvapEff
Variable :
SoilMoistCritAmntforEvapEff :real(DP), save
: <Japanese> Critical amount of soil moisture for evaporation efficiency
SoilMoistMeaningLess
Variable :
SoilMoistMeaningLess = -1.0d0 :real(DP), save
: <Japanese> Meaning less value for soil moisture on the ocean
bucket_model_inited
Variable :
bucket_model_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
module_name
Constant :
module_name = ‘bucket_model :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: $’ // ’$Id: bucket_model.f90,v 1.1.1.1 2010-08-17 05:24:51 takepiro Exp $’ :character(*), parameter
: モジュールのバージョン Module version