subroutine RadiationDcpamEV1Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QVap, xyz_QO3, xyz_Height, xy_SurfTemp, xyr_RadSFlux, xyr_RadLFlux, xyra_DelRadLFlux )


    ! USE statements
    !

    ! dcpam 地球大気向け短波放射モデル Ver. 1
    ! dcpam short wave radiation model for the Earth's atmosphere Ver. 1
    !
    use radiation_dcpam_E_SW_V1, only: RadiationDcpamESWV1Flux

    ! Roewe and Liou (1978) による長波放射モデル
    ! Long radiation model described by Roewe and Liou (1978)
    !
    use radiation_RL78, only: RadiationRL78Flux

    real(DP), intent(in ) :: xy_SurfAlbedo( 0:imax-1, 1:jmax )
    real(DP), intent(in ) :: xyz_Press    ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in ) :: xyr_Press    ( 0:imax-1, 1:jmax, 0:kmax )
    real(DP), intent(in ) :: xyz_Temp     ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in ) :: xyz_QVap     ( 0:imax-1, 1:jmax, 1:kmax )
                              ! $ q $ .   混合比. Mass mixing ratio of constituents (1)
    real(DP), intent(in ) :: xyz_QO3      ( 0:imax-1, 1:jmax, 1:kmax )
                              ! O3 分布 (1)
                              ! O3 distribution (1)
    real(DP), intent(in ) :: xyz_Height   ( 0:imax-1, 1:jmax, 1:kmax )
    real(DP), intent(in ) :: xy_SurfTemp     (0:imax-1, 1:jmax)
    real(DP), intent(out) :: xyr_RadSFlux ( 0:imax-1, 1:jmax, 0:kmax )
    real(DP), intent(out) :: xyr_RadLFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP), intent(out) :: xyra_DelRadLFlux(0:imax-1, 1:jmax, 0:kmax, 0:1)



    ! 初期化
    ! Initialization
    !
    if ( .not. radiation_dcpam_E_V1_inited ) call RadiationDcpamEV1Init


    ! dcpam 地球大気向け短波放射モデル Ver. 1
    ! dcpam short wave radiation model for the Earth's atmosphere Ver. 1
    !
    call RadiationDcpamESWV1Flux( xy_SurfAlbedo, xyz_Press, xyr_Press, xyz_Temp, xyz_QVap, xyz_QO3, xyz_Height, xyr_RadSFlux )


    ! Roewe and Liou (1978) による長波放射モデル
    ! Long radiation model described by Roewe and Liou (1978)
    !
    call RadiationRL78Flux( xyz_Temp, xyz_QVap, xyz_QO3, xyr_Press, xyz_Press, xy_SurfTemp, xyr_RadLFlux, xyra_DelRadLFlux )


  end subroutine RadiationDcpamEV1Flux

  subroutine RadiationDcpamEV1Init

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify


    ! 宣言文 ; Declaration statements
    !

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read

!!$    ! NAMELIST 変数群
!!$    ! NAMELIST group name
!!$    !
!!$    namelist /radiation_dcpam_SWEV1_nml/ &
!!$      & FactorCondToCloud
!!$          !
!!$          ! デフォルト値については初期化手続 "radiation_dcpam_SWEV1#RadiationDcpamSWEV1Init"
!!$          ! のソースコードを参照のこと.
!!$          !
!!$          ! Refer to source codes in the initialization procedure
!!$          ! "radiation_dcpam_SWEV1#RadiationDcpamSWEV1Init" for the default values.
!!$          !
!!$
!!$
!!$    ! デフォルト値の設定
!!$    ! Default values settings
!!$    !
!!$
!!$
!!$
!!$    ! NAMELIST の読み込み
!!$    ! NAMELIST is input
!!$    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml,                     & ! (in)
!!$        & nml = radiation_dcpam_SWEV1_nml, & ! (out)
!!$        & iostat = iostat_nml )             ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$    end if




    ! 印字 ; Print
    !
!!$    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$    call MessageNotify( 'M', module_name, 'FactorCondToCloud = %f', d = (/ FactorCondToCloud /) )
!!$    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    radiation_dcpam_E_V1_inited = .true.

  end subroutine RadiationDcpamEV1Init