初期値データ提供

Prepare initial data

初期値データのサンプルを提供します.

現在は以下のデータを提供します.

Small Disturbance of Temperature
- 風速: 0 [m/s], 地表面気圧: 1.0e+5 [Pa], 比湿: 1.0e-10 [kg kg-1]
- 温度: 250 [K] に微小擾乱を加えたもの
[AGCM 5.3]{www.gfd-dennou.org/library/agcm5} Default
- 風速: 0 [m/s], 地表面気圧: 1.0e+5 [Pa], 比湿: 1.0e-10 [kg kg-1]
- 温度: 250 [K] に微小擾乱を加えたもの
Sugiyama et al. (2008)
- 木星大気を想定した, Sugiyama et al. (2008) で用いられていた初期値を模倣する.
- 風速: 0 [m/s], 地表面気圧: 3.0e+6 [Pa]
- 温度: $ sigma = 1 $ で 490 [K] とし, 気圧 1.0e+4 となる高度まで, 温位一定で (乾燥断熱線に沿って) 高度に伴い温度を減少させる. 気圧 1.0e+4 以下の高度では温度一定とする.
- 比湿: $ sigma = 1 $ で 6.11641e-3 [kg kg-1] とし, 比湿が飽和比湿の 75 % となる高度までは一定とする. その高度以上では, 比湿を飽和比湿の 75 % とする.

Prepare sample data of initial data (restart data)

Now, following data are provided.

Small Disturbance of Temperature
- Velocity: 0 [m/s], Surface pressure: 1.0e+5 [Pa], Specific humidity: 1.0e-10 [kg kg-1]
- Temperature: 250 [K] and perturbation
[AGCM 5.3]{www.gfd-dennou.org/library/agcm5} Default
- Velocity: 0 [m/s], Surface pressure: 1.0e+5 [Pa], Specific humidity: 1.0e-10 [kg kg-1]
- Temperature: 250 [K] and perturbation
Sugiyama et al. (2008)
- Initial data like a Jovian atmosphere that is used in Sugiyama et al. (2008) is imitated.
- Velocity: 0 [m/s], Surface pressure: 3.0e+6 [Pa]
- Temperature: 490 [K] at $ sigma = 1 $ . And it is declined with constant potential temperature (along dry adiabat line) below where air pressure is 1.0e+4. It is constant above where air pressure is 1.0e+4.
- Specific humidity: 6.11641e-3 [kg kg-1] at $ sigma = 1 $ . And it is constant below where it is same as 75 % of saturation specific humidity. Above that, specific humidity is 75 % of saturation specific humidity.

Procedures List

SetInitData :	初期値データ取得
———— :	————
SetInitData :	Get initial data

NAMELIST

NAMELIST#initial_data_nml

Methods

InitCheck InitDataInit Pattern PsAvr QVapAvr SetInitData Sugiyamaetal2008InitData TempAvr Ueq initial_data_inited module_name version

Included Modules

gridset dc_types dc_message axesset dc_string constants saturate namelist_util dc_iounit

Public Instance methods

Pattern

Variable :

Pattern :

character(STRING), save, public

:	初期値データのパターン. 以下のパターンを選択可能. Initial data pattern Available patterns are as follows. "Small Disturbance of Temperature" (default value) "AGCM 5.3 Default" "Sugiyama et al. (2008)"

PsAvr

Variable :

PsAvr :

real(DP), save, public

:	$ bar{p_s} $ . 地表面気圧平均値. Mean surface pressure

QVapAvr

Variable :

QVapAvr :

real(DP), save, public

:	$ bar{q} $ . 比湿平均値. Mean specific humidity

SetInitData( xyz_U, xyz_V, xyz_Temp, xyz_QVap, xy_Ps )

Subroutine :

xyz_U(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ u $ . 東西風速. Eastward wind

xyz_V(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ v $ . 南北風速. Northward wind

xyz_Temp(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ T $ . 温度. Temperature

xyz_QVap(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ q $ . 比湿. Specific humidity

xy_Ps(0:imax-1, 1:jmax) :

real(DP), intent(out)

:	$ p_s $ . 地表面気圧. Surface pressure

初期値データのサンプルを提供します.

Prepare sample data of initial data

[Source]

  subroutine SetInitData( xyz_U, xyz_V, xyz_Temp, xyz_QVap, xy_Ps )
    !
    ! 初期値データのサンプルを提供します. 
    ! 
    ! Prepare sample data of initial data
    !

    ! モジュール引用 ; USE statements
    !

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: x_Lon, y_Lat, z_Sigma
                              ! $ \sigma $ レベル (整数). 
                              ! Full $ \sigma $ level

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: LChar

    ! 宣言文 ; Declaration statements
    !
    implicit none
    real(DP), intent(out):: xyz_U  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ u $ .   東西風速. Eastward wind
    real(DP), intent(out):: xyz_V  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ v $ .   南北風速. Northward wind
    real(DP), intent(out):: xyz_Temp  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ .   温度. Temperature
    real(DP), intent(out):: xyz_QVap  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q $ .   比湿. Specific humidity
    real(DP), intent(out):: xy_Ps (0:imax-1, 1:jmax)
                              ! $ p_s $ . 地表面気圧. Surface pressure

    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude
    integer:: k               ! 鉛直方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in vertical direction

    ! 実行文 ; Executable statement

    if ( .not. initial_data_inited ) call InitDataInit

    ! 微小な温度擾乱のある静止場
    ! Stationary field with small disturbance of temperature
    !
    select case ( LChar( trim(Pattern) ) )
    case ( 'small disturbance of temperature' )
      xyz_U    = 0.0_DP
      xyz_V    = 0.0_DP
      xyz_Temp = TempAvr
      xy_Ps    = PsAvr
      xyz_QVap = QVapAvr

      ! 温度に擾乱を与える
      ! Add perturbation to temperature
      !
      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_Temp(i,j,k) = xyz_Temp(i,j,k) + 0.1_DP * sin ( x_Lon(i) * y_Lat(j) ) - 0.1_DP * ( 1.0_DP - z_Sigma(k) )
          end do
        end do
      end do

      ! 東西風速を与える
      ! Add eastward wind
      !
      do j = 1, jmax
        xyz_U(:,j,:) = Ueq * cos(y_Lat(j))
      end do

    ! AGCM5.3 のデフォルト初期値
    ! AGCM5.3 default initial values
    !
    case ( 'agcm 5.3 default' )
      xyz_U    = 0.0_DP
      xyz_V    = 0.0_DP
      xyz_Temp = TempAvr
      xy_Ps    = PsAvr
      xyz_QVap = QVapAvr

      ! 温度に擾乱を与える
      ! Add perturbation to temperature
      !
      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax - 1
            xyz_Temp(i,j,k) = xyz_Temp(i,j,k) + 0.1_DP * sin ( real( ( i + 1 ) * ( jmax - j + 1 ) * ( kmax - k ), DP ) / real( imax * jmax * kmax, DP ) * 10.0_DP )
          end do
        end do
      end do

      ! 東西風速を与える
      ! Add eastward wind
      !
      do j = 1, jmax
        xyz_U(:,j,:) = Ueq * cos(y_Lat(j))
      end do

    ! Sugiyama et al. (2008) の初期値
    ! Initial values of Sugiyama et al. (2008)
    !
    case ( 'sugiyama et al. (2008)' )

      call Sugiyamaetal2008InitData( xyz_U, xyz_V, xyz_Temp, xyz_QVap, xy_Ps )

    end select

  end subroutine SetInitData

TempAvr

Variable :

TempAvr :

real(DP), save, public

:	$ bar{T} $ . 温度平均値. Mean temperature

Ueq

Variable :

Ueq :

real(DP), save, public

:	$ u_{eq} $ . 赤道上の東西風速. Eastward wind on the equator

initial_data_inited

Variable :

initial_data_inited = .false. :

logical, save, public

:	初期設定フラグ. Initialization flag

Private Instance methods

InitCheck( )

Subroutine :

依存モジュールの初期化チェック

Check initialization of dependency modules

[Source]

  subroutine InitCheck
    !
    ! 依存モジュールの初期化チェック
    !
    ! Check initialization of dependency modules

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_util_inited

    ! 格子点設定
    ! Grid points settings
    !
    use gridset, only: gridset_inited

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: constants_inited

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: axesset_inited


    ! 実行文 ; Executable statement

    if ( .not. namelist_util_inited ) call MessageNotify( 'E', module_name, '"namelist_util" module is not initialized.' )

    if ( .not. gridset_inited ) call MessageNotify( 'E', module_name, '"gridset" module is not initialized.' )

    if ( .not. constants_inited ) call MessageNotify( 'E', module_name, '"constants" module is not initialized.' )

    if ( .not. axesset_inited ) call MessageNotify( 'E', module_name, '"axesset" module is not initialized.' )

  end subroutine InitCheck

InitDataInit( )

Subroutine :

This procedure input/output NAMELIST#initial_data_nml .

[Source]

  subroutine InitDataInit

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: LChar

    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
    namelist /initial_data_nml/ Pattern, TempAvr, PsAvr, QVapAvr, Ueq
          !
          ! デフォルト値については初期化手続 "initial_data#InitDataInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "initial_data#InitDataInit" for the default values. 
          !


    ! 実行文 ; Executable statement

    if ( initial_data_inited ) return
    call InitCheck

    ! デフォルト値の設定 (まずは Pattern のみ)
    ! Default values settings (At first, "Pattern" only)
    !
    Pattern = 'Small Disturbance of Temperature'
    !Pattern = 'AGCM 5.3 Default'

    ! NAMELIST の読み込み (まずは Pattern のみ)
    ! NAMELIST is input (At first, "Pattern" only)
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = initial_data_nml, iostat = iostat_nml )     ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if

    ! デフォルト値の設定
    ! Default values settings
    !
    select case ( LChar( trim(Pattern) ) )
    case ( 'small disturbance of temperature' )
      TempAvr = 250.0_DP
      PsAvr   = 1.0e+5_DP
      QVapAvr = 1.0e-10_DP
      Ueq     = 0.0_DP
    case ( 'agcm 5.3 default' )
      TempAvr = 250.0_DP
      PsAvr   = 1.0e+5_DP
      QVapAvr = 1.0e-10_DP
      Ueq     = 0.0_DP
    case ( 'sugiyama et al. (2008)' )
      TempAvr = 490.0_DP
      PsAvr   = 3.0e+6_DP
      QVapAvr = 6.11641e-3_DP
      Ueq     = 0.0_DP
    case default
      call MessageNotify( 'E', module_name, 'Pattern=<%c> is invalid.', c1 = trim(Pattern) )
    end select

    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
    if ( trim(namelist_filename) /= '' ) then
      call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)

      rewind( unit_nml )
      read( unit_nml, nml = initial_data_nml, iostat = iostat_nml )     ! (out)
      close( unit_nml )

      call NmlutilMsg( iostat_nml, module_name ) ! (in)
    end if


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '  Pattern = %c', c1 = trim(Pattern) )
    call MessageNotify( 'M', module_name, '  TempAvr = %f', d = (/ TempAvr  /) )
    call MessageNotify( 'M', module_name, '  PsAvr   = %f', d = (/ PsAvr  /) )
    call MessageNotify( 'M', module_name, '  QVapAvr = %f', d = (/ QVapAvr  /) )
    call MessageNotify( 'M', module_name, '  Ueq     = %f', d = (/ Ueq  /) )
    call MessageNotify( 'M', module_name, '' )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    initial_data_inited = .true.
  end subroutine InitDataInit

Sugiyamaetal2008InitData( xyz_U, xyz_V, xyz_Temp, xyz_QVap, xy_Ps )

Subroutine :

xyz_U(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ u $ . 東西風速. Eastward wind

xyz_V(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ v $ . 南北風速. Northward wind

xyz_Temp(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ T $ . 温度. Temperature

xyz_QVap(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ q $ . 比湿. Specific humidity

xy_Ps(0:imax-1, 1:jmax) :

real(DP), intent(out)

:	$ p_s $ . 地表面気圧. Surface pressure

Sugiyama et al. (2008) の初期値 Initial values of Sugiyama et al. (2008)

[Source]

  subroutine Sugiyamaetal2008InitData( xyz_U, xyz_V, xyz_Temp, xyz_QVap, xy_Ps )
    !
    ! Sugiyama et al. (2008) の初期値
    ! Initial values of Sugiyama et al. (2008)
    !

    ! モジュール引用 ; USE statements
    !

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: x_Lon, y_Lat, z_Sigma
                              ! $ \sigma $ レベル (整数). 
                              ! Full $ \sigma $ level

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: CpDry, GasRDry               ! $ R $ [J kg-1 K-1]. 
                              ! 乾燥大気の気体定数. 
                              ! Gas constant of air

    ! 飽和比湿の算出
    ! Evaluate saturation specific humidity
    !
    use saturate, only: xyz_CalcQVapSat

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: LChar

    ! 宣言文 ; Declaration statements
    !
    implicit none
    real(DP), intent(out):: xyz_U  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ u $ .   東西風速. Eastward wind
    real(DP), intent(out):: xyz_V  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ v $ .   南北風速. Northward wind
    real(DP), intent(out):: xyz_Temp  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ .   温度. Temperature
    real(DP), intent(out):: xyz_QVap  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ q $ .   比湿. Specific humidity
    real(DP), intent(out):: xy_Ps (0:imax-1, 1:jmax)
                              ! $ p_s $ . 地表面気圧. Surface pressure

    ! Sugiyama et al. (2008) 用作業変数
    ! Work variables for Sugiyama et al. (2008)
    !
    real(DP):: xyz_PotTemp (0:imax-1, 1:jmax, 1:kmax)
                              ! 温位. Potential temperature
    real(DP):: xyz_Press (0:imax-1, 1:jmax, 1:kmax)
                              ! 気圧. Air pressure
    real(DP):: xy_TempMin (0:imax-1, 1:jmax)
                              ! 温度の最小値. Minimum value of temperature
    real(DP):: xyz_QVapSat (0:imax-1, 1:jmax, 1:kmax)
                              ! 飽和比湿. Saturation specific humidity

    ! 作業変数
    ! Work variables
    !
    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude
    integer:: k               ! 鉛直方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in vertical direction

    ! 実行文 ; Executable statement

    if ( .not. initial_data_inited ) call InitDataInit


    xyz_U    = 0.0_DP
    xyz_V    = 0.0_DP
    xyz_Temp = TempAvr
    xy_Ps    = PsAvr
    xyz_QVap = QVapAvr

    ! 温度の計算
    ! Calculate temperature
    !
    xyz_PotTemp = TempAvr
    xy_TempMin  = TempAvr

    do k = 1, kmax
      xyz_Temp(:,:,k) = xyz_PotTemp(:,:,k) * ( z_Sigma(k) )**( GasRDry / CpDry )

      if ( PsAvr * z_Sigma(k) < 1.0e+4_DP ) then
        xyz_Temp(:,:,k) = xy_TempMin
      else
        xy_TempMin = xyz_Temp(:,:,k)
      end if
    end do

    ! 温度に擾乱を与える
    ! Add perturbation to temperature
    !
    do k = 1, kmax
      do j = 1, jmax
        do i = 0, imax - 1
          xyz_Temp(i,j,k) = xyz_Temp(i,j,k) + 0.1_DP * sin ( real( ( i + 1 ) * ( jmax - j + 1 ) * ( kmax - k ), DP ) / real( imax * jmax * kmax, DP ) * 10.0_DP )
        end do
      end do
    end do

    ! 飽和比湿計算
    ! Calculate saturation specific humidity
    !
    do k = 1, kmax
      xyz_Press(:,:,k) = xy_Ps * z_Sigma(k)
    end do

    xyz_QVapSat = xyz_CalcQVapSat( xyz_Temp, xyz_Press )

    ! 比湿の計算
    ! Calculate specific humidity
    !
    where ( xyz_QVap > xyz_QVapSat * 0.75 )
      xyz_QVap = xyz_QVapSat * 0.75
    end where


  end subroutine Sugiyamaetal2008InitData

module_name

Constant :

module_name = ‘initial_data‘ :

character(*), parameter

:	モジュールの名称. Module name

version

Constant :

version = ’$Name: dcpam5-20101008-1 $’ // ’$Id: initial_data.f90,v 1.6 2010-09-12 02:03:47 yot Exp $’ :

character(*), parameter

:	モジュールのバージョン Module version