Class | co2_phase_change |
In: |
saturate/co2_phase_change.f90
|
Note that Japanese and English are described in parallel.
!$ ! DryConvAdjust : | 乾燥対流調節 |
!$ ! ———— : | ———— |
!$ ! DryConvAdjust : | Dry convective adjustment |
Subroutine : | |||
xyr_Press(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(in )
| ||
xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(in )
| ||
xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(inout)
| ||
xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(inout)
|
CO2 相変化
CO2 phase change
subroutine CO2PhaseChangeLimitTemp( xyr_Press, xyz_Press, xy_SurfTemp, xyz_Temp ) ! ! CO2 相変化 ! ! CO2 phase change ! ! モジュール引用 ; USE statements ! ! 時刻管理 ! Time control ! use timeset, only: DelTime, TimeN, TimesetClockStart, TimesetClockStop ! ヒストリデータ出力 ! History data output ! use gtool_historyauto, only: HistoryAutoPut ! 宣言文 ; Declaration statements ! implicit none real(DP), intent(in ):: xyr_Press (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{p} $ . 気圧 (半整数レベル). ! Air pressure (half level) real(DP), intent(in ):: xyz_Press (0:imax-1, 1:jmax, 1:kmax) ! $ p $ . 気圧 (整数レベル). ! Air pressure (full level) real(DP), intent(inout):: xy_SurfTemp(0:imax-1, 1:jmax) ! $ T_s $ . 惑星表面温度. Surface temperature real(DP), intent(inout):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax) ! $ T $ . 温度. Temperature ! 作業変数 ! Work variables ! real(DP):: xy_SurfTempB (0:imax-1, 1:jmax) ! 調節前の惑星表面温度. ! Surface temperature before adjustment real(DP):: xyz_TempB (0:imax-1, 1:jmax, 1:kmax) ! 調節前の温度. ! Temperature before adjustment real(DP):: xy_DSurfTempDt(0:imax-1, 1:jmax) ! 惑星表面温度変化率. ! Surface temperature tendency real(DP):: xyz_DTempDt (0:imax-1, 1:jmax, 1:kmax) ! 温度変化率. ! Temperature tendency real(DP):: xy_SurfTempCond(0:imax-1, 1:jmax) real(DP):: xyz_TempCond (0:imax-1, 1:jmax, 1:kmax) integer:: i ! 経度方向に回る DO ループ用作業変数 ! Work variables for DO loop in longitude integer:: j ! 緯度方向に回る DO ループ用作業変数 ! Work variables for DO loop in latitude integer:: k ! 鉛直方向に回る DO ループ用作業変数 ! Work variables for DO loop in vertical direction logical :: FlagCheckPs ! 実行文 ; Executable statement ! ! 計算時間計測開始 ! Start measurement of computation time ! call TimesetClockStart( module_name ) ! 初期化 ! Initialization ! if ( .not. co2_phase_change_inited ) call CO2PhaseChangeInit if ( .not. FlagUse ) return FlagCheckPs = .false. do j = 1, jmax do i = 0, imax-1 if ( xyr_Press(i,j,0) > 1.0d4 ) then FlagCheckPs = .true. end if end do end do if ( FlagCheckPs ) then call MessageNotify( 'W', module_name, 'Surface pressure is greater than 10000 Pa.' ) end if ! 調節前 "Temp" の保存 ! Store "Temp" before adjustment ! xy_SurfTempB = xy_SurfTemp xyz_TempB = xyz_Temp do j = 1, jmax do i = 0, imax-1 xy_SurfTempCond(i,j) = 149.2d0 + 6.48d0 * log( 0.135d0 * xyr_Press(i,j,0) * 1.0d-2 ) end do end do do k = 1, kmax do j = 1, jmax do i = 0, imax-1 xyz_TempCond(i,j,k) = 149.2d0 + 6.48d0 * log( 0.135d0 * xyz_Press(i,j,k) * 1.0d-2 ) end do end do end do do j = 1, jmax do i = 0, imax-1 if ( xy_SurfTemp(i,j) < xy_SurfTempCond(i,j) ) then xy_SurfTemp(i,j) = xy_SurfTempCond(i,j) end if end do end do do k = 1, kmax do j = 1, jmax do i = 0, imax-1 if ( xyz_Temp(i,j,k) < xyz_TempCond(i,j,k) ) then xyz_Temp(i,j,k) = xyz_TempCond(i,j,k) end if end do end do end do ! 温度変化率 ! Calculate temperature tendency ! xy_DSurfTempDt = ( xy_SurfTemp - xy_SurfTempB ) / ( 2.0_DP * DelTime ) xyz_DTempDt = ( xyz_Temp - xyz_TempB ) / ( 2.0_DP * DelTime ) ! ヒストリデータ出力 ! History data output ! call HistoryAutoPut( TimeN, 'DSurfTempDtCO2PhaseChange', xy_DSurfTempDt ) call HistoryAutoPut( TimeN, 'DTempDtCO2PhaseChange' , xyz_DTempDt ) ! 計算時間計測一時停止 ! Pause measurement of computation time ! call TimesetClockStop( module_name ) end subroutine CO2PhaseChangeLimitTemp
Variable : | |||
co2_phase_change_inited = .false. : | logical, save, public
|
Subroutine : |
co2_phase_change モジュールの初期化を行います. NAMELIST#co2_phase_change_nml の読み込みはこの手続きで行われます.
"co2_phase_change" module is initialized. "NAMELIST#co2_phase_change_nml" is loaded in this procedure.
This procedure input/output NAMELIST#co2_phase_change_nml .
subroutine CO2PhaseChangeInit ! ! co2_phase_change モジュールの初期化を行います. ! NAMELIST#co2_phase_change_nml の読み込みはこの手続きで行われます. ! ! "co2_phase_change" module is initialized. ! "NAMELIST#co2_phase_change_nml" is loaded in this procedure. ! ! モジュール引用 ; USE statements ! ! NAMELIST ファイル入力に関するユーティリティ ! Utilities for NAMELIST file input ! use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid ! ファイル入出力補助 ! File I/O support ! use dc_iounit, only: FileOpen ! 種別型パラメタ ! Kind type parameter ! use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output ! 文字列操作 ! Character handling ! use dc_string, only: StoA ! ヒストリデータ出力 ! History data output ! use gtool_historyauto, only: HistoryAutoAddVariable ! 宣言文 ; Declaration statements ! implicit none integer:: unit_nml ! NAMELIST ファイルオープン用装置番号. ! Unit number for NAMELIST file open integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT. ! IOSTAT of NAMELIST read ! NAMELIST 変数群 ! NAMELIST group name ! namelist /co2_phase_change_nml/ FlagUse ! デフォルト値については初期化手続 "co2_phase_change#CO2PhaseChangeInit" ! のソースコードを参照のこと. ! ! Refer to source codes in the initialization procedure ! "co2_phase_change#CO2PhaseChangeInit" for the default values. ! ! 実行文 ; Executable statement ! if ( co2_phase_change_inited ) return ! デフォルト値の設定 ! Default values settings ! FlagUse = .false. ! NAMELIST の読み込み ! NAMELIST is input ! if ( trim(namelist_filename) /= '' ) then call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in) rewind( unit_nml ) read( unit_nml, nml = co2_phase_change_nml, iostat = iostat_nml ) ! (out) close( unit_nml ) call NmlutilMsg( iostat_nml, module_name ) ! (in) !!$ if ( iostat_nml == 0 ) write( STDOUT, nml = cumulus_adjust_nml ) end if ! ヒストリデータ出力のためのへの変数登録 ! Register of variables for history data output ! call HistoryAutoAddVariable( 'DSurfTempDtCO2PhaseChange', (/ 'lon ', 'lat ', 'time' /), 'heating by CO2 phase change', 'K s-1' ) call HistoryAutoAddVariable( 'DTempDtCO2PhaseChange', (/ 'lon ', 'lat ', 'sig ', 'time' /), 'heating by CO2 phase change', 'K s-1' ) ! 印字 ; Print ! call MessageNotify( 'M', module_name, '----- Initialization Messages -----' ) call MessageNotify( 'M', module_name, ' FlagUse = %b', l = (/ FlagUse /) ) call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) ) co2_phase_change_inited = .true. end subroutine CO2PhaseChangeInit
Constant : | |||
module_name = ‘co2_phase_change‘ : | character(*), parameter
|
Constant : | |||
version = ’$Name: dcpam5-20110225-4 $’ // ’$Id: co2_phase_change.f90,v 1.1 2010-09-18 01:46:54 yot Exp $’ : | character(*), parameter
|