Class | auxiliary |
In: |
util/auxiliary.f90
|
Note that Japanese and English are described in parallel.
このモジュールでは, 補助的な変数を計算するサブルーチンや関数を提供します.
This module provides subroutines and functions for calculating auxiliary variables.
AuxVars : | 温度の半整数 $ sigma $ レベルの補間と 気圧と高度の算出 |
AuxFinalize : | 終了処理 (モジュール内部の変数の割り付け解除) |
————— : | ————— |
AuxVars : | Interpolate temperature on half $ sigma $ level, and calculate pressure and height |
AuxFinalize : | Termination (deallocate variables in this module) |
Subroutine : |
モジュール内部の変数の割り付け解除を行います.
Deallocate variables in this module.
subroutine AuxFinalize ! ! モジュール内部の変数の割り付け解除を行います. ! ! Deallocate variables in this module. ! ! 宣言文 ; Declaration statements ! implicit none ! 実行文 ; Executable statement ! if ( .not. auxiliary_inited ) return ! 割り付け解除 ! Deallocation ! if ( allocated( z_TempInpolM ) ) deallocate( z_TempInpolM ) if ( allocated( z_TempInpol ) ) deallocate( z_TempInpol ) auxiliary_inited = .false. end subroutine AuxFinalize
Subroutine : | |||
xy_Ps(0:imax-1, 1:jmax) : | real(DP), intent(in)
| ||
xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(in)
| ||
xyr_Temp(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
| ||
xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out), optional
| ||
xyr_Press(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
| ||
xy_SurfHeight(0:imax-1,1:jmax) : | real(DP), intent(in ), optional
| ||
xyz_Height(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out), optional
| ||
xyr_Height(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
| ||
xyz_Exner(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out), optional
| ||
xyr_Exner(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
|
温度の半整数σレベルの補間, 気圧と高度の算出, エクスナー関数の計算を行います.
Interpolate temperature on half sigma level, and calculate pressure and height, and calculate exner function.
subroutine AuxVars( xy_Ps, xyz_Temp, xyr_Temp, xyz_Press, xyr_Press, xy_SurfHeight, xyz_Height, xyr_Height, xyz_Exner, xyr_Exner ) ! ! 温度の半整数σレベルの補間, 気圧と高度の算出, ! エクスナー関数の計算を行います. ! ! Interpolate temperature on half sigma level, ! and calculate pressure and height, ! and calculate exner function. ! モジュール引用 ; USE statements ! ! 座標データ設定 ! Axes data settings ! use axesset, only: z_Sigma, r_Sigma, z_DelSigma, r_DelSigma ! $ \Delta \sigma $ (半整数). ! $ \Delta \sigma $ (Half) ! 物理定数設定 ! Physical constants settings ! use constants, only: Grav, GasRDry, CpDry ! $ C_p $ [J kg-1 K-1]. ! 乾燥大気の定圧比熱. ! Specific heat of air at constant pressure ! 時刻管理 ! Time control ! use timeset, only: TimesetClockStart, TimesetClockStop ! 宣言文 ; Declaration statements ! implicit none real(DP), intent(in):: xy_Ps (0:imax-1, 1:jmax) ! $ p_s (t-\Delta t) $ . 地表面気圧. Surface pressure real(DP), intent(in):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax) ! $ T $ . 温度. Temperature real(DP), intent(out), optional:: xyr_Temp (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{T} $ . 温度 (半整数レベル). ! Temperature (half level) real(DP), intent(out), optional:: xyz_Press (0:imax-1, 1:jmax, 1:kmax) ! $ p $ . 気圧 (整数レベル). ! Air pressure (full level) real(DP), intent(out), optional:: xyr_Press (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{p} $ . 気圧 (半整数レベル). ! Air pressure (half level) real(DP), intent(in ), optional:: xy_SurfHeight(0:imax-1,1:jmax) ! $ z_s $ . 地表面高度. ! Surface height. real(DP), intent(out), optional:: xyz_Height (0:imax-1, 1:jmax, 1:kmax) ! 高度 (整数レベル). ! Height (full level) real(DP), intent(out), optional:: xyr_Height (0:imax-1, 1:jmax, 0:kmax) ! 高度 (半整数レベル). ! Height (half level) real(DP), intent(out), optional:: xyz_Exner (0:imax-1, 1:jmax, 1:kmax) ! Exner 関数 (整数レベル). ! Exner function (full level) real(DP), intent(out), optional:: xyr_Exner (0:imax-1, 1:jmax, 0:kmax) ! Exner 関数 (半整数レベル). ! Exner function (half level) ! 作業変数 ! Work variables ! real(DP):: xyz_PressWork (0:imax-1, 1:jmax, 1:kmax) ! $ p $ . 気圧 (整数レベル). ! Air pressure (full level) real(DP):: xyr_PressWork (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{p} $ . 気圧 (半整数レベル). ! Air pressure (half level) real(DP):: xyr_TempWork (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{T} $ . 温度 (半整数レベル). ! Temperature (half level) integer:: k ! 鉛直方向に回る DO ループ用作業変数 ! Work variables for DO loop in vertical direction ! 実行文 ; Executable statement ! ! 計算時間計測開始 ! Start measurement of computation time ! call TimesetClockStart( module_name ) ! 初期化 ! Initialization ! if ( .not. auxiliary_inited ) call AuxInit ! 温度の補間 ! Interpolate temperature ! if ( present( xyr_Temp ) ) then call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyr_Temp = xyr_Temp ) end if ! 気圧の計算 ! Calculate pressure ! if ( present( xyz_Press ) ) then call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyz_Press = xyz_Press ) end if if ( present( xyr_Press ) ) then call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyr_Press = xyr_Press ) end if ! 高度の計算 ! Calculate height ! if ( present( xyz_Height ) .and. present( xy_SurfHeight ) ) then xyz_Height(:,:,1) = xy_SurfHeight(:,:) + GasRDry / Grav * xyz_Temp(:,:,1) * ( 1. - z_Sigma(1) ) if ( present( xyr_Temp ) ) then xyr_TempWork = xyr_Temp else call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyr_Temp = xyr_TempWork ) end if do k = 2, kmax xyz_Height(:,:,k) = xyz_Height(:,:,k-1) + GasRDry / Grav * xyr_TempWork(:,:,k-1) * r_DelSigma(k-1) / r_Sigma(k-1) end do end if if ( present( xyr_Height ) .and. present( xy_SurfHeight ) ) then xyr_Height(:,:,0) = xy_SurfHeight do k = 1, kmax xyr_Height(:,:,k) = xyr_Height(:,:,k-1) + GasRDry / Grav * xyz_Temp(:,:,k) * z_DelSigma(k) / z_Sigma(k) end do end if ! エクスナー関数の計算 ! Calculate exner function ! if ( present( xyz_Exner ) ) then if ( present( xyz_Press ) ) then xyz_PressWork = xyz_Press else call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyz_Press = xyz_PressWork ) end if xyz_Exner = ( xyz_PressWork / RefPress ) ** ( GasRDry / CpDry ) end if if ( present( xyr_Exner ) ) then if ( present( xyr_Press ) ) then xyr_PressWork = xyr_Press else call AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyr_Press = xyr_PressWork ) end if xyr_Exner = ( xyr_PressWork / RefPress ) ** ( GasRDry / CpDry ) end if ! 計算時間計測一時停止 ! Pause measurement of computation time ! call TimesetClockStop( module_name ) end subroutine AuxVars
Variable : | |||
auxiliary_inited = .false. : | logical, save, public
|
Subroutine : |
auxiliary モジュールの初期化を行います. NAMELIST#auxiliary_nml の読み込みはこの手続きで行われます.
"auxiliary" module is initialized. "NAMELIST#auxiliary_nml" is loaded in this procedure.
This procedure input/output NAMELIST#auxiliary_nml .
subroutine AuxInit ! ! auxiliary モジュールの初期化を行います. ! NAMELIST#auxiliary_nml の読み込みはこの手続きで行われます. ! ! "auxiliary" module is initialized. ! "NAMELIST#auxiliary_nml" is loaded in this procedure. ! ! モジュール引用 ; USE statements ! ! 座標データ設定 ! Axes data settings ! use axesset, only: z_Sigma, r_Sigma ! $ \sigma $ レベル (半整数). ! Half $ \sigma $ level ! NAMELIST ファイル入力に関するユーティリティ ! Utilities for NAMELIST file input ! use namelist_util, only: namelist_filename, NmlutilMsg ! ファイル入出力補助 ! File I/O support ! use dc_iounit, only: FileOpen ! 種別型パラメタ ! Kind type parameter ! use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output ! 文字列操作 ! Character handling ! use dc_string, only: StoA ! 宣言文 ; Declaration statements ! implicit none integer:: unit_nml ! NAMELIST ファイルオープン用装置番号. ! Unit number for NAMELIST file open integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT. ! IOSTAT of NAMELIST read integer:: k ! 鉛直方向に回る DO ループ用作業変数 ! Work variables for DO loop in vertical direction ! NAMELIST 変数群 ! NAMELIST group name ! namelist /auxiliary_nml/ RefPress ! ! デフォルト値については初期化手続 "auxiliary#AuxInit" ! のソースコードを参照のこと. ! ! Refer to source codes in the initialization procedure ! "auxiliary#AuxInit" for the default values. ! ! 実行文 ; Executable statement ! if ( auxiliary_inited ) return call InitCheck ! デフォルト値の設定 ! Default values settings ! RefPress = 1.0e+6 ! NAMELIST の読み込み ! NAMELIST is input ! if ( trim(namelist_filename) /= '' ) then call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in) rewind( unit_nml ) read( unit_nml, nml = auxiliary_nml, iostat = iostat_nml ) ! (out) close( unit_nml ) call NmlutilMsg( iostat_nml, module_name ) ! (in) end if ! 補間用の係数の計算 ! Calculate coefficient for interpolation ! allocate( z_TempInpolM(1:kmax) ) allocate( z_TempInpol(1:kmax) ) z_TempInpolM(1) = 0. z_TempInpol (1) = 0. do k = 2, kmax z_TempInpolM(k) = ( log( r_Sigma( k-1 ) ) - log( z_Sigma( k ) ) ) / ( log( z_Sigma( k-1 ) ) - log( z_Sigma( k ) ) ) z_TempInpol(k) = ( log( z_Sigma( k-1 ) ) - log( r_Sigma( k-1 ) ) ) / ( log( z_Sigma( k-1 ) ) - log( z_Sigma( k ) ) ) end do ! 印字 ; Print ! call MessageNotify( 'M', module_name, '----- Initialization Messages -----' ) call MessageNotify( 'M', module_name, ' z_TempInpolM = %*r', r = real( z_TempInpolM ), n = (/ kmax /) ) call MessageNotify( 'M', module_name, ' z_TempInpol = %*r', r = real( z_TempInpol ), n = (/ kmax /) ) call MessageNotify( 'M', module_name, ' RefPress = %f', d = (/ RefPress /) ) call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) ) auxiliary_inited = .true. end subroutine AuxInit
Subroutine : | |||
xy_Ps(0:imax-1, 1:jmax) : | real(DP), intent(in)
| ||
xyz_Temp(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(in)
| ||
xyr_Temp(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
| ||
xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out), optional
| ||
xyr_Press(0:imax-1, 1:jmax, 0:kmax) : | real(DP), intent(out), optional
|
温度の半整数σレベルの補間, 気圧の算出, エクスナー関数の計算を行います.
Interpolate temperature on half sigma level, and calculate pressure, and calculate exner function.
subroutine AuxVarsInternalRoutine( xy_Ps, xyz_Temp, xyr_Temp, xyz_Press, xyr_Press ) ! ! 温度の半整数σレベルの補間, 気圧の算出, ! エクスナー関数の計算を行います. ! ! Interpolate temperature on half sigma level, ! and calculate pressure, ! and calculate exner function. ! モジュール引用 ; USE statements ! ! 座標データ設定 ! Axes data settings ! use axesset, only: z_Sigma, r_Sigma ! $ \sigma $ レベル (半整数). ! Half $ \sigma $ level ! 宣言文 ; Declaration statements ! implicit none real(DP), intent(in):: xy_Ps (0:imax-1, 1:jmax) ! $ p_s (t-\Delta t) $ . 地表面気圧. Surface pressure real(DP), intent(in):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax) ! $ T $ . 温度. Temperature real(DP), intent(out), optional:: xyr_Temp (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{T} $ . 温度 (半整数レベル). ! Temperature (half level) real(DP), intent(out), optional:: xyz_Press (0:imax-1, 1:jmax, 1:kmax) ! $ p $ . 気圧 (整数レベル). ! Air pressure (full level) real(DP), intent(out), optional:: xyr_Press (0:imax-1, 1:jmax, 0:kmax) ! $ \hat{p} $ . 気圧 (半整数レベル). ! Air pressure (half level) ! 作業変数 ! Work variables ! integer:: k ! 鉛直方向に回る DO ループ用作業変数 ! Work variables for DO loop in vertical direction ! 実行文 ; Executable statement ! ! 初期化 ! Initialization ! if ( .not. auxiliary_inited ) call AuxInit ! 温度の補間 ! Interpolate temperature ! if ( present( xyr_Temp ) ) then do k = 2, kmax xyr_Temp(:,:,k-1) = z_TempInpolM(k) * xyz_Temp(:,:,k-1) + z_TempInpol (k) * xyz_Temp(:,:,k) end do xyr_Temp(:,:,kmax) = xyz_Temp(:,:,kmax) xyr_Temp(:,:,0) = xyz_Temp(:,:,1) end if ! 気圧の計算 ! Calculate pressure ! if ( present( xyz_Press ) ) then do k = 1, kmax xyz_Press(:,:,k) = xy_Ps * z_Sigma(k) end do end if if ( present( xyr_Press ) ) then do k = 0, kmax xyr_Press(:,:,k) = xy_Ps * r_Sigma(k) end do end if end subroutine AuxVarsInternalRoutine
Subroutine : |
依存モジュールの初期化チェック
Check initialization of dependency modules
subroutine InitCheck ! ! 依存モジュールの初期化チェック ! ! Check initialization of dependency modules ! モジュール引用 ; USE statements ! ! NAMELIST ファイル入力に関するユーティリティ ! Utilities for NAMELIST file input ! use namelist_util, only: namelist_util_inited ! 格子点設定 ! Grid points settings ! use gridset, only: gridset_inited ! 物理定数設定 ! Physical constants settings ! use constants, only: constants_inited ! 座標データ設定 ! Axes data settings ! use axesset, only: axesset_inited ! 実行文 ; Executable statement ! if ( .not. namelist_util_inited ) call MessageNotify( 'E', module_name, '"namelist_util" module is not initialized.' ) if ( .not. gridset_inited ) call MessageNotify( 'E', module_name, '"gridset" module is not initialized.' ) if ( .not. constants_inited ) call MessageNotify( 'E', module_name, '"constants" module is not initialized.' ) if ( .not. axesset_inited ) call MessageNotify( 'E', module_name, '"axesset" module is not initialized.' ) end subroutine InitCheck
Constant : | |||
version = ’$Name: dcpam5-20110228-4 $’ // ’$Id: auxiliary.f90,v 1.8 2010-03-07 14:51:05 yot Exp $’ : | character(*), parameter
|
Variable : | |||
z_TempInpol(:) : | real(DP), save, allocatable
|
Variable : | |||
z_TempInpolM(:) : | real(DP), save, allocatable
|