物理過程のみの計算のための力学過程

A dynamics for calculation with physical processes only

Note that Japanese and English are described in parallel.

Procedures List

NAMELIST

Methods

DynamicsPhysicsOnly DynamicsPhysicsOnlyInit dynamics_physicsonly_inited module_name version

Included Modules

gridset composition dc_types dc_message timeset dc_trace

Public Instance methods

DynamicsPhysicsOnly( xyz_DUDtPhy, xyz_DVDtPhy, xyz_DTempDtPhy, xyzf_DQMixDtPhy, xy_PsB, xyz_UB, xyz_VB, xyz_TempB, xyzf_QMixB, xy_PsA, xyz_UA, xyz_VA, xyz_TempA, xyzf_QMixA )

Subroutine :

xyz_DUDtPhy(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ left(DP{u}{t}right)^{phy} $ . 外力項 (物理過程) による東西風速変化. Eastward wind tendency by external force terms (physical processes)

xyz_DVDtPhy(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ left(DP{v}{t}right)^{phy} $ . 外力項 (物理過程) による南北風速変化. Northward wind tendency by external force terms (physicalprocesses)

xyz_DTempDtPhy(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ left(DP{T}{t}right)^{phy} $ . 外力項 (物理過程) による温度変化. Temperature tendency by external force terms (physical processes)

xyzf_DQMixDtPhy(0:imax-1, 1:jmax, 1:kmax, 1:ncmax) :

real(DP), intent(in)

:	$ left(DP{q}{t}right)^{phy} $ . 外力項 (物理過程) による比湿変化. Temperature tendency by external force terms (physical processes)

xy_PsB(0:imax-1, 1:jmax) :

real(DP), intent(in )

:	$ p_s $ . 地表面気圧 (半整数レベル). Surface pressure (half level)

xyz_UB(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in )

:	$ u $ . 東西風速. Eastward wind

xyz_VB(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in )

:	$ v $ . 南北風速. Northward wind

xyz_TempB(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in )

:	$ T $ . 温度 (整数レベル). Temperature (full level)

xyzf_QMixB(0:imax-1, 1:jmax, 1:kmax, 1:ncmax) :

real(DP), intent(in )

:	$ q $ . 比湿. Specific humidity

xy_PsA(0:imax-1, 1:jmax) :

real(DP), intent(out)

:	$ p_s $ . 地表面気圧 (半整数レベル). Surface pressure (half level)

xyz_UA(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ u $ . 東西風速. Eastward wind

xyz_VA(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ v $ . 南北風速. Northward wind

xyz_TempA(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	$ T $ . 温度 (整数レベル). Temperature (full level)

xyzf_QMixA(0:imax-1, 1:jmax, 1:kmax, 1:ncmax) :

real(DP), intent(out)

:	$ q $ . 比湿. Specific humidity

[Source]

  subroutine DynamicsPhysicsOnly( xyz_DUDtPhy, xyz_DVDtPhy, xyz_DTempDtPhy, xyzf_DQMixDtPhy, xy_PsB, xyz_UB, xyz_VB, xyz_TempB, xyzf_QMixB, xy_PsA, xyz_UA, xyz_VA, xyz_TempA, xyzf_QMixA )

    ! モジュール引用 ; USE statements
    !

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimeN, TimesetClockStart, TimesetClockStop

    ! デバッグ用ユーティリティ
    ! Utilities for debug
    !
    use dc_trace, only: DbgMessage, BeginSub, EndSub

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xyz_DUDtPhy    (0:imax-1, 1:jmax, 1:kmax)
                              ! $ \left(\DP{u}{t}\right)^{phy} $ .
                              ! 外力項 (物理過程) による東西風速変化.
                              ! Eastward wind tendency by external force terms (physical processes)
    real(DP), intent(in):: xyz_DVDtPhy    (0:imax-1, 1:jmax, 1:kmax)
                              ! $ \left(\DP{v}{t}\right)^{phy} $ .
                              ! 外力項 (物理過程) による南北風速変化.
                              ! Northward wind tendency by external force terms (physicalprocesses)
    real(DP), intent(in):: xyz_DTempDtPhy (0:imax-1, 1:jmax, 1:kmax)
                              ! $ \left(\DP{T}{t}\right)^{phy} $ .
                              ! 外力項 (物理過程) による温度変化.
                              ! Temperature tendency by external force terms (physical processes)
    real(DP), intent(in):: xyzf_DQMixDtPhy (0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
                              ! $ \left(\DP{q}{t}\right)^{phy} $ .
                              ! 外力項 (物理過程) による比湿変化.
                              ! Temperature tendency by external force terms (physical processes)
    real(DP), intent(in ):: xy_PsB(0:imax-1, 1:jmax)
                              ! $ p_s $ . 地表面気圧 (半整数レベル). 
                              ! Surface pressure (half level)
    real(DP), intent(in ):: xyz_UB(0:imax-1, 1:jmax, 1:kmax)
                              ! $ u $ . 東西風速. Eastward wind
    real(DP), intent(in ):: xyz_VB(0:imax-1, 1:jmax, 1:kmax)
                              ! $ v $ . 南北風速. Northward wind
    real(DP), intent(in ):: xyz_TempB(0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ . 温度 (整数レベル). 
                              ! Temperature (full level)
    real(DP), intent(in ):: xyzf_QMixB(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
                              ! $ q $ .     比湿. Specific humidity
    real(DP), intent(out):: xy_PsA(0:imax-1, 1:jmax)
                              ! $ p_s $ . 地表面気圧 (半整数レベル). 
                              ! Surface pressure (half level)
    real(DP), intent(out):: xyz_UA(0:imax-1, 1:jmax, 1:kmax)
                              ! $ u $ . 東西風速. Eastward wind
    real(DP), intent(out):: xyz_VA(0:imax-1, 1:jmax, 1:kmax)
                              ! $ v $ . 南北風速. Northward wind
    real(DP), intent(out):: xyz_TempA(0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ . 温度 (整数レベル). 
                              ! Temperature (full level)
    real(DP), intent(out):: xyzf_QMixA(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
                              ! $ q $ .     比湿. Specific humidity


    ! 作業変数
    ! Work variables
    !

!!$    integer:: i               ! 経度方向に回る DO ループ用作業変数
!!$                              ! Work variables for DO loop in longitude
!!$    integer:: j               ! 緯度方向に回る DO ループ用作業変数
!!$                              ! Work variables for DO loop in latitude
!!$    integer:: k

    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. dynamics_physicsonly_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    xy_PsA     = xy_PsB
    xyz_UA     = xyz_UB     + xyz_DUDtPhy     * 2.0d0 * DelTime
    xyz_VA     = xyz_VB     + xyz_DVDtPhy     * 2.0d0 * DelTime
    xyz_TempA  = xyz_TempB  + xyz_DTempDtPhy  * 2.0d0 * DelTime
    xyzf_QMixA = xyzf_QMixB + xyzf_DQMixDtPhy * 2.0d0 * DelTime


  end subroutine DynamicsPhysicsOnly

DynamicsPhysicsOnlyInit( )

Subroutine :

[Source]

  subroutine DynamicsPhysicsOnlyInit

    ! モジュール引用 ; USE statements
    !


    ! 宣言文 ; Declaration statements
    !
    implicit none

!!$    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
!!$                              ! Unit number for NAMELIST file open
!!$    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
!!$                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /surface_flux_bulk_nml/ &
!!$      & VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, &
!!$      & VelMaxForVel, VelMaxForTemp, VelMaxForQVap, &
!!$! 
!!$      & Neutral, ConstBulkCoef, &
!!$      & VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, &
!!$      & VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax
!!$          !
!!$          ! デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit" 
!!$          ! のソースコードを参照のこと. 
!!$          !
!!$          ! Refer to source codes in the initialization procedure
!!$          ! "surface_flux_bulk#SurfFluxInit" for the default values. 
!!$          !

    ! 実行文 ; Executable statement
    !

    if ( dynamics_physicsonly_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !



    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml, &                ! (in)
!!$        & nml = surface_flux_bulk_nml, &  ! (out)
!!$        & iostat = iostat_nml )        ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$    end if
!!$
!!$    ! ヒストリデータ出力のためのへの変数登録
!!$    ! Register of variables for history data output
!!$    !
!!$    call HistoryAutoAddVariable( 'TauX', &
!!$      & (/ 'lon ', 'lat ', 'time' /), &
!!$      & 'surface stress(x)  ', 'N m-2' )
!!$
!!$    call HistoryAutoAddVariable( 'TauY', &
!!$      & (/ 'lon ', 'lat ', 'time' /), &
!!$      & 'surface stress(y)  ', 'N m-2' )
!!$
!!$    call HistoryAutoAddVariable( 'Sens', &
!!$      & (/ 'lon ', 'lat ', 'time' /), &
!!$      & 'sensible heat flux', 'W m-2' )
!!$
!!$    call HistoryAutoAddVariable( 'EVap', &
!!$      & (/ 'lon ', 'lat ', 'time' /), &
!!$      & 'latent heat flux  ', 'W m-2' )
!!$
!!$    ! 印字 ; Print
!!$    !
!!$    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$
!!$    call MessageNotify( 'M', module_name, '  VelMinForRi   = %f', d = (/ VelMinForRi   /) )
!!$    call MessageNotify( 'M', module_name, '  VelMinForVel  = %f', d = (/ VelMinForVel  /) )
!!$    call MessageNotify( 'M', module_name, '  VelMinForTemp = %f', d = (/ VelMinForTemp /) )
!!$    call MessageNotify( 'M', module_name, '  VelMinForQVap = %f', d = (/ VelMinForQVap /) )
!!$    call MessageNotify( 'M', module_name, '  VelMaxForVel  = %f', d = (/ VelMaxForVel  /) )
!!$    call MessageNotify( 'M', module_name, '  VelMaxForTemp = %f', d = (/ VelMaxForTemp /) )
!!$    call MessageNotify( 'M', module_name, '  VelMaxForQVap = %f', d = (/ VelMaxForQVap /) )
!!$
!!$    call MessageNotify( 'M', module_name, 'Bulk coefficients:' )
!!$    call MessageNotify( 'M', module_name, '  Neutral         = %b', l = (/ Neutral          /) )
!!$    call MessageNotify( 'M', module_name, '  ConstBulkCoef   = %f', d = (/ ConstBulkCoef   /) )
!!$    call MessageNotify( 'M', module_name, '  VelBulkCoefMin  = %f', d = (/ VelBulkCoefMin  /) )
!!$    call MessageNotify( 'M', module_name, '  TempBulkCoefMin = %f', d = (/ TempBulkCoefMin /) )
!!$    call MessageNotify( 'M', module_name, '  QVapBulkCoefMin = %f', d = (/ QVapBulkCoefMin /) )
!!$    call MessageNotify( 'M', module_name, '  VelBulkCoefMax  = %f', d = (/ VelBulkCoefMax  /) )
!!$    call MessageNotify( 'M', module_name, '  TempBulkCoefMax = %f', d = (/ TempBulkCoefMax /) )
!!$    call MessageNotify( 'M', module_name, '  QVapBulkCoefMax = %f', d = (/ QVapBulkCoefMax /) )
!!$    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    dynamics_physicsonly_inited = .true.

  end subroutine DynamicsPhysicsOnlyInit

Private Instance methods

dynamics_physicsonly_inited

Variable :

dynamics_physicsonly_inited = .false. :

logical, save

:	初期設定フラグ. Initialization flag

module_name

Constant :

module_name = ‘dynamics_physicsonly‘ :

character(*), parameter

:	モジュールの名称. Module name

version

Constant :

version = ’$Name: dcpam5-20120229 $’ // ’$Id: dynamics_physicsonly.f90,v 1.3 2011-07-08 03:55:18 yot Exp $’ :

character(*), parameter

:	モジュールのバージョン Module version