| Class | read_time_series |
| In: |
io/read_time_series.f90
|
Note that Japanese and English are described in parallel.
海表面温度, O3 量などの時系列データを NetCDF ファイルから読み込む.
Reading time series data, such as sea surface temperature, O3, and so on, from NetCDF file.
| !$ ! GroundFileGet : | 地表面データファイルの入力 |
!$ !—
| !$ ! GroundFileOpen : | 地表面データファイルのオープン |
| !$ ! GroundFileOutput : | 地表面データファイルへのデータ出力 |
| !$ ! GroundFileClose : | 地表面データファイルのクローズ |
++
| ———— : | ———— |
| !$ ! GroundFileGet : | Input ground data file |
!$ !—
| !$ ! GroundFileOpen : | Open ground data file |
| !$ ! GroundFileOutput : | Data output to ground data file |
| !$ ! GroundFileClose : | Close ground data file |
++
!$ ! NAMELIST#ground_file_io_nml
| Subroutine : |
This procedure input/output NAMELIST#read_time_series_nml .
subroutine ReadTimeSeriesInit
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
! 時刻管理
! Time control
!
use timeset, only: InitialDate
! 宣言文 ; Declaration statements
!
logical :: flag_mpi_init
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
namelist /read_time_series_nml/ FlagYearCyclic
!
! デフォルト値については初期化手続 "read_time_series#ReadTimeSeriesInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "read_time_series#ReadTimeSeriesInit" for the default values.
!
if ( read_time_series_inited ) return
! デフォルト値の設定
! Default values settings
!
FlagYearCyclic = .true.
! NAMELIST の読み込み
! NAMELIST is input
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = read_time_series_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
end if
! Initialzation
!
NumMaxStruct = 0
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, 'FlagYearCyclic = %b', l = (/ FlagYearCyclic /) )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
read_time_series_inited = .true.
end subroutine ReadTimeSeriesInit
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| Var : | real(DP) , intent(inout)
|
Alias for SetValFromTimeSeriesWrapper0D
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| xy_Var(0:imax-1, 1:jmax) : | real(DP) , intent(inout)
|
Alias for SetValFromTimeSeriesWrapper2D
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , intent(in )
| ||
| xyz_Var(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , intent(inout)
| ||
| FlagLogVLev : | logical , intent(in ) | ||
| FlagLog : | logical , intent(in ) | ||
| FlagPositiveDef : | logical , intent(in ) |
Alias for SetValFromTimeSeriesWrapper3D
| Subroutine : | |
| FileName : | character(*), intent(in ) |
| DateString : | character(*), intent(in ) |
| Yr : | integer , intent(out) |
| Mon : | integer , intent(out) |
| Day : | integer , intent(out) |
| Hr : | integer , intent(out) |
| Min : | integer , intent(out) |
| Sec : | real(DP) , intent(out) |
subroutine InterpretTimeUnitString( FileName, DateString, Yr, Mon, Day, Hr, Min, Sec )
! モジュール引用 ; USE statements
!
! 宣言文 ; Declaration statements
!
implicit none
character(*), intent(in ) :: FileName
character(*), intent(in ) :: DateString
integer , intent(out) :: Yr
integer , intent(out) :: Mon
integer , intent(out) :: Day
integer , intent(out) :: Hr
integer , intent(out) :: Min
real(DP) , intent(out) :: Sec
! 作業変数
! Work variables
!
integer :: StrLen
integer :: l
integer :: ll
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
StrLen = len_trim( DateString )
! format of the DateString has to be "... since YYYY/MM/DD HH:MM:SS".
search_since : do ll = 1, StrLen-5+1
if ( DateString(ll:ll+5-1) == "since" ) exit search_since
end do search_since
if ( ll > StrLen-5+1 ) then
call MessageNotify( 'E', module_name, 'Unable to find "since" in %c.', c1 = trim(FileName) )
end if
!
l = ll + 5
!
if ( DateString(l:l) /= " " ) then
call MessageNotify( 'E', module_name, 'Unable to find a space after "since" in %c.', c1 = trim(FileName) )
end if
!
l = l + 1
!
search_yr : do ll = l, StrLen
if ( DateString(ll:ll) == "-" ) exit search_yr
end do search_yr
if ( ll > StrLen ) then
call MessageNotify( 'E', module_name, 'Unable to find "-" between year and month in %c.', c1 = trim(FileName) )
end if
read( DateString(l:ll-1), * ) Yr
!
l = ll + 1
!
search_mon : do ll = l, StrLen
if ( DateString(ll:ll) == "-" ) exit search_mon
end do search_mon
if ( ll > StrLen ) then
call MessageNotify( 'E', module_name, 'Unable to find "-" between month and day in %c.', c1 = trim(FileName) )
end if
read( DateString(l:ll-1), * ) Mon
!
l = ll + 1
!
search_day : do ll = l, StrLen
if ( DateString(ll:ll) == " " ) exit search_day
end do search_day
if ( ll > StrLen ) then
call MessageNotify( 'E', module_name, 'Unable to find a space between day and hour in %c.', c1 = trim(FileName) )
end if
read( DateString(l:ll-1), * ) Day
!
l = ll
!
if ( DateString(l:l) /= " " ) then
call MessageNotify( 'E', module_name, 'Unable to confirm a space between day and hour in %c.', c1 = trim(FileName) )
end if
!
l = l + 1
!
search_hr : do ll = l, StrLen
if ( DateString(ll:ll) == ":" ) exit search_hr
end do search_hr
if ( ll > StrLen ) then
call MessageNotify( 'E', module_name, 'Unable to find ":" between hour and minute in %c.', c1 = trim(FileName) )
end if
read( DateString(l:ll-1), * ) Hr
!
l = ll + 1
!
search_min : do ll = l, StrLen
if ( DateString(ll:ll) == ":" ) exit search_min
end do search_min
if ( ll > StrLen ) then
call MessageNotify( 'E', module_name, 'Unable to find ":" between minute and second in %c.', c1 = trim(FileName) )
end if
read( DateString(l:ll-1), * ) Min
!
l = ll + 1
!
search_sec : do ll = l, StrLen
if ( ( DateString(ll:ll) == " " ) .or. ( DateString(ll:ll) == "." ) ) exit search_sec
end do search_sec
!!$ if ( ll > StrLen ) then
!!$ call MessageNotify( 'E', module_name, 'Unable to find end of second in %c.', c1 = trim(FileName) )
!!$ end if
read( DateString(l:ll-1), * ) Sec
end subroutine InterpretTimeUnitString
| Subroutine : | |||
| Keyword : | character(*), intent(in )
| ||
| Index : | integer , intent(out)
|
subroutine SetValFromTimeSeriesFindIndex( Keyword, Index )
! 宣言文 ; Declaration statements
!
implicit none
character(*), intent(in ):: Keyword
!
! Keyword
integer , intent(out):: Index
!
! Index
integer :: l
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
! Search index of a_TSDataInfo with Keyword
Index = 0
search_index : do l = 1, NumMaxStruct
if ( a_TSDataInfo( l ) % Keyword == Keyword ) then
Index = l
exit search_index
end if
end do search_index
! If an element of a_TSDataInfo with Keyword cannot be found, a new
! element will be used.
if ( Index == 0 ) then
NumMaxStruct = NumMaxStruct + 1
Index = NumMaxStruct
a_TSDataInfo( Index ) % Keyword = Keyword
end if
if ( Index > NumMaxStructArr ) then
call MessageNotify( 'E', module_name, 'Index is greater than NumMaxStructArr.' )
end if
end subroutine SetValFromTimeSeriesFindIndex
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| Var : | real(DP) , intent(inout)
|
subroutine SetValFromTimeSeriesWrapper0D( Keyword, FileName, VarName, Var )
! 宣言文 ; Declaration statements
!
implicit none
character(*), intent(in ):: Keyword
character(*), intent(in ):: FileName
! ファイル名.
! File name
character(*), intent(in ):: VarName
! 変数名.
! Variable name
real(DP) , intent(inout):: Var
! 地表面温度.
! Surface temperature
integer :: Index
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
call SetValFromTimeSeriesFindIndex( Keyword, Index )
call SetValuesFromTimeSeries( a_TSDataInfo( Index ), FileName, VarName, Var = Var )
end subroutine SetValFromTimeSeriesWrapper0D
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| xy_Var(0:imax-1, 1:jmax) : | real(DP) , intent(inout)
|
subroutine SetValFromTimeSeriesWrapper2D( Keyword, FileName, VarName, xy_Var )
! 宣言文 ; Declaration statements
!
implicit none
character(*), intent(in ):: Keyword
character(*), intent(in ):: FileName
! ファイル名.
! File name
character(*), intent(in ):: VarName
! 変数名.
! Variable name
real(DP) , intent(inout):: xy_Var(0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
integer :: Index
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
call SetValFromTimeSeriesFindIndex( Keyword, Index )
call SetValuesFromTimeSeries( a_TSDataInfo( Index ), FileName, VarName, xy_Var = xy_Var )
end subroutine SetValFromTimeSeriesWrapper2D
| Subroutine : | |||
| Keyword : | character(*), intent(in ) | ||
| FileName : | character(*), intent(in )
| ||
| VarName : | character(*), intent(in )
| ||
| xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , intent(in )
| ||
| xyz_Var(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , intent(inout)
| ||
| FlagLogVLev : | logical , intent(in ) | ||
| FlagLog : | logical , intent(in ) | ||
| FlagPositiveDef : | logical , intent(in ) |
subroutine SetValFromTimeSeriesWrapper3D( Keyword, FileName, VarName, xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
! 宣言文 ; Declaration statements
!
implicit none
character(*), intent(in ):: Keyword
character(*), intent(in ):: FileName
! ファイル名.
! File name
character(*), intent(in ):: VarName
! 変数名.
! Variable name
real(DP) , intent(in ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
! 地表面温度.
! Surface temperature
real(DP) , intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
! 地表面温度.
! Surface temperature
logical , intent(in ):: FlagLogVLev
logical , intent(in ):: FlagLog
logical , intent(in ):: FlagPositiveDef
integer :: Index
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
call SetValFromTimeSeriesFindIndex( Keyword, Index )
call SetValuesFromTimeSeries( a_TSDataInfo(Index), FileName, VarName, xyz_Press = xyz_Press, xyz_Var = xyz_Var, FlagLogVLev = FlagLogVLev, FlagLog = FlagLog, FlagPositiveDef = FlagPositiveDef )
end subroutine SetValFromTimeSeriesWrapper3D
| Subroutine : | |||
| TSDataInfo : | type(time_series_data), intent(inout) | ||
| FileName : | character(*) , intent(in )
| ||
| VarName : | character(*) , intent(in )
| ||
| xyz_Press(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , optional, intent(in )
| ||
| Var : | real(DP) , optional, intent(inout)
| ||
| xy_Var(0:imax-1, 1:jmax) : | real(DP) , optional, intent(inout)
| ||
| xyz_Var(0:imax-1, 1:jmax, 1:kmax) : | real(DP) , optional, intent(inout)
| ||
| FlagLogVLev : | logical , optional, intent(in ) | ||
| FlagLog : | logical , optional, intent(in ) | ||
| FlagPositiveDef : | logical , optional, intent(in ) |
地表面の諸々のデータを設定します. xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.
Get various data on ground. Arguments excluding "xy_SurfTemp" are configured at first only.
subroutine SetValuesFromTimeSeries( TSDataInfo, FileName, VarName, xyz_Press, Var, xy_Var, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
!
! 地表面の諸々のデータを設定します.
! xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.
!
! Get various data on ground.
! Arguments excluding "xy_SurfTemp" are configured at first only.
!
! モジュール引用 ; USE statements
!
! gtool4 データ入力
! Gtool4 data input
!
use gtool_history, only: HistoryGet
! 文字列操作
! Character handling
!
use dc_string, only: toChar
! 日付および時刻の取り扱い
! Date and time handler
!
use dc_calendar, only: DCCalDateEvalSecOfYear
! 時刻管理
! Time control
!
use timeset, only: TimeN, InitialDate
! 宣言文 ; Declaration statements
!
implicit none
type(time_series_data), intent(inout):: TSDataInfo
character(*) , intent(in ):: FileName
! ファイル名.
! File name
character(*) , intent(in ):: VarName
! 変数名.
! Variable name
real(DP) , optional, intent(in ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
! 3 次元配列.
! 3D array
real(DP) , optional, intent(inout):: Var
! 2 次元配列.
! 2D array
real(DP) , optional, intent(inout):: xy_Var (0:imax-1, 1:jmax)
! 2 次元配列.
! 2D array
real(DP) , optional, intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
! 3 次元配列.
! 3D array
logical , optional, intent(in ):: FlagLogVLev
logical , optional, intent(in ):: FlagLog
logical , optional, intent(in ):: FlagPositiveDef
! 作業変数
! Work variables
!
real(DP):: CurrentTimeInSec
integer :: tindex
!!$ real(DP):: xyza_VarInterpolated(0:imax-1, 1:jmax, 1:kmax, 2)
logical :: FlagReadData
integer :: t
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
if ( ( .not. present( Var ) ) .and. ( .not. present( xy_Var ) ) .and. ( .not. present( xyz_Var ) ) ) then
call MessageNotify( 'E', module_name, 'Var or xy_Var or xyz_Var have to be given.' )
end if
if ( ( present( Var ) ) .and. ( present( xy_Var ) ) ) then
call MessageNotify( 'E', module_name, 'Both Var and xy_Var are not given.' )
end if
if ( ( present( xy_Var ) ) .and. ( present( xyz_Var ) ) ) then
call MessageNotify( 'E', module_name, 'Both xy_Var and xyz_Var are not given.' )
end if
if ( ( present( xyz_Var ) ) .and. ( present( Var ) ) ) then
call MessageNotify( 'E', module_name, 'Both xyz_Var and Var are not be given.' )
end if
if ( ( present( xyz_Var ) ) .and. ( .not. present( xyz_Press ) ) ) then
call MessageNotify( 'E', module_name, 'xyz_Press has to be given, when xyz_Var is given.' )
end if
! 実行文 ; Executable statement
!
if ( .not. associated( TSDataInfo % a_time ) ) then
if ( present( Var ) ) then
call StructureInit( FileName, VarName, 0, TSDataInfo )
else if ( present( xy_Var ) ) then
call StructureInit( FileName, VarName, 2, TSDataInfo )
else
call StructureInit( FileName, VarName, 3, TSDataInfo )
end if
end if
! Update values of time paying attention to leap year
! This is not used, because this causes error when FlagYearCyclic = .true..
!
!!$ call UpdateTime( &
!!$ & TSDataInfo & ! (inout)
!!$ & )
if ( TSDataInfo % tmax >= 2 ) then
if ( FlagYearCyclic ) then
CurrentTimeInSec = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )
else
CurrentTimeInSec = TimeN + TSDataInfo%TimeFromOriginToInitialDate
end if
!!$ write( 6, * ) TSDataInfo%a_time(TSDataInfo%a_tindex(1)), &
!!$ & SecOfYear, TSDataInfo%a_time(TSDataInfo%a_tindex(2))
! Check whether the data have to be read or not
if ( ( CurrentTimeInSec < TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) .or. ( CurrentTimeInSec >= TSDataInfo%a_time(TSDataInfo%a_tindex(2)) ) ) then
FlagReadData = .true.
else
FlagReadData = .false.
end if
if ( .not. FlagYearCyclic ) then
if ( ( CurrentTimeInSec < TSDataInfo%a_time(1) ) .or. ( CurrentTimeInSec >= TSDataInfo%a_time(TSDataInfo%tmax) ) ) then
FlagReadData = .false.
CurrentTimeInSec = max( CurrentTimeInSec, TSDataInfo%a_time(1) )
CurrentTimeInSec = min( CurrentTimeInSec, TSDataInfo%a_time(TSDataInfo%tmax) )
end if
end if
if ( FlagReadData ) then
!!$ if ( ( CurrentTimeInSec < TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) .or. &
!!$ & ( CurrentTimeInSec >= TSDataInfo%a_time(TSDataInfo%a_tindex(2)) ) ) then
TSDataInfo % a_tindex(1) = 0
TSDataInfo % a_tindex(2) = 1
do t = 1, TSDataInfo%tmax
if ( TSDataInfo % a_time(t) <= CurrentTimeInSec ) then
TSDataInfo % a_tindex(1) = t
TSDataInfo % a_tindex(2) = t+1
end if
end do
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) 'in if', TSDataInfo % a_tindex(1), TSDataInfo % a_tindex(2)
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
!!$ write( 6, * ) '##############################################'
! set time index
if ( FlagYearCyclic ) then
tindex = TSDataInfo % a_tindex(1)
if ( tindex == 0 ) then
tindex = TSDataInfo % tmax
else if ( tindex == TSDataInfo % tmax + 1 ) then
tindex = 1
else
tindex = tindex
end if
else
tindex = TSDataInfo % a_tindex(1)
tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
end if
if ( present( Var ) ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else if ( present( xy_Var ) ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
end if
! set time index
if ( FlagYearCyclic ) then
tindex = TSDataInfo % a_tindex(2)
if ( tindex == 0 ) then
tindex = TSDataInfo % tmax
else if ( tindex == TSDataInfo % tmax + 1 ) then
tindex = 1
else
tindex = tindex
end if
else
tindex = TSDataInfo % a_tindex(2)
tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
end if
if ( present( Var ) ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else if ( present( xy_Var ) ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
end if
end if
if ( present( Var ) ) then
Var = ( TSDataInfo%xyza_SavedData(0,1,1,2) - TSDataInfo%xyza_SavedData(0,1,1,1) ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) + TSDataInfo%xyza_SavedData(0,1,1,1)
else if ( present( xy_Var ) ) then
xy_Var = ( TSDataInfo%xyza_SavedData(:,:,1,2) - TSDataInfo%xyza_SavedData(:,:,1,1) ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) + TSDataInfo%xyza_SavedData(:,:,1,1)
else
TSDataInfo%xyz_VarTimeInterpolated = ( TSDataInfo%xyza_SavedData(:,:,:,2) - TSDataInfo%xyza_SavedData(:,:,:,1) ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) * ( CurrentTimeInSec - TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) + TSDataInfo%xyza_SavedData(:,:,:,1)
call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyz_VarTimeInterpolated, xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
end if
else
if ( present( Var ) ) then
Var = TSDataInfo%xyza_SavedData(0,1,1,1)
else if ( present( xy_Var ) ) then
xy_Var = TSDataInfo%xyza_SavedData(:,:,1,1)
else
call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyza_SavedData(:,:,:,1), xyz_Press, xyz_Var, FlagLogVLev, FlagLog, FlagPositiveDef )
end if
end if
end subroutine SetValuesFromTimeSeries
| Subroutine : | |||
| FileName : | character(*) , intent(in )
| ||
| VarName : | character(*) , intent(in )
| ||
| NDims : | integer , intent(in )
| ||
| TSDataInfo : | type(time_series_data), intent(inout) |
subroutine StructureInit( FileName, VarName, NDims, TSDataInfo )
! モジュール引用 ; USE statements
!
! gtool4 データ入力
! Gtool4 data input
!
use gtool_history, only: HistoryGet, HistoryGetPointer
! 文字列操作
! Character handling
!
use dc_string, only: toChar
! 暦と日時の取り扱い
! Calendar and Date handler
!
use dc_calendar, only: DC_CAL_DATE, DCCalInquire, DCCalDateEvalSecOfYear, DCCalDateCreate, DCCalDateDifference
! 時刻管理
! Time control
!
use timeset, only: TimeN, InitialDate
! NetCDF wrapper
!
use netcdf_wrapper, only: NWGetAtt, NWInqDimLen
! 宣言文 ; Declaration statements
!
implicit none
character(*) , intent(in ):: FileName
! ファイル名.
! File name
character(*) , intent(in ):: VarName
! 変数名.
! Variable name
integer , intent(in ):: NDims
! 時間以外の変数の次元.
! Number of dimensions except for time dimension
type(time_series_data), intent(inout):: TSDataInfo
! 作業変数
! Work variables
!
real(DP) :: CurrentTimeInSec
!!$ real(DP), pointer:: a_time(:)
integer :: tindex
integer :: t
character(STRING):: VLevelName
character(STRING):: attchar
integer:: hour_in_day, min_in_hour, day_in_year
integer, pointer:: day_in_month_ptr(:) => null()
real(DP):: sec_in_min, sec_in_day
type(DC_CAL_DATE), save :: DataOriginDate
! データ日時基準
! Origin date of data
integer :: DataOriginYr
integer :: DataOriginMon
integer :: DataOriginDay
integer :: DataOriginHr
integer :: DataOriginMin
real(DP) :: DataOriginSec
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
!!$ nullify( a_time )
call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day = hour_in_day , min_in_hour = min_in_hour , sec_in_min = sec_in_min ) ! (out)
day_in_year = sum( day_in_month_ptr )
deallocate( day_in_month_ptr )
sec_in_day = hour_in_day * min_in_hour * sec_in_min
TSDataInfo % FileName = FileName
TSDataInfo % VarName = VarName
TSDataInfo % NDims = NDims
if ( TSDataInfo % NDims == 0 ) then
TSDataInfo % NVLevels = 1
else if ( TSDataInfo % NDims == 2 ) then
TSDataInfo % NVLevels = 1
else
VLevelName = "plev"
call HistoryGetPointer( TSDataInfo%FileName, VLevelName, TSDataInfo % z_VLevels, flag_mpi_split = flag_mpi_split )
TSDataInfo % NVLevels = size( TSDataInfo % z_Vlevels )
end if
call NWInqDimLen( TSDataInfo%FileName, 'time', TSDataInfo%tmax )
if ( ( FlagYearCyclic ) .or. ( TSDataInfo % tmax < 2 ) ) then
! case in which the data are cyclic
TSDataInfo % TimeFromOriginToInitialDate = 0.0_DP
else
! case in which the data are not cyclic
call NWGetAtt( TSDataInfo%FileName, 'time', 'units', AttChar )
call InterpretTimeUnitString( TSDataInfo%FileName, AttChar, DataOriginYr, DataOriginMon, DataOriginDay, DataOriginHr, DataOriginMin, DataOriginSec )
! Check time from data origin to start time of integration
!
call DCCalDateCreate( year = DataOriginYr, month = DataOriginMon, day = DataOriginDay, hour = DataOriginHr , min = DataOriginMin, sec = DataOriginSec, date = DataOriginDate )
TSDataInfo % TimeFromOriginToInitialDate = DCCalDateDifference( DataOriginDate, InitialDate )
call MessageNotify( 'M', module_name, 'Origin time for a variable %c is %d/%d/%d %d:%d:%f.', c1 = trim(TSDataInfo%VarName), i = (/ DataOriginYr, DataOriginMon, DataOriginDay, DataOriginHr, DataOriginMin /), d = (/ DataOriginSec /) )
call MessageNotify( 'M', module_name, 'Time from origin to initial date is %f s.', d = (/ TSDataInfo % TimeFromOriginToInitialDate /) )
end if
!-----
!!$ call HistoryGetPointer( &
!!$ & TSDataInfo%FileName, &
!!$ & 'time', &
!!$ & a_time, &
!!$ & flag_mpi_split = flag_mpi_split &
!!$ & )
!!$ TSDataInfo % tmax = size( a_time )
!!$
!!$ call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
!!$ if ( ( attchar(1:3) == 'day' ) .or. &
!!$ & ( attchar(1:3) == 'DAY' ) .or. &
!!$ & ( attchar(1:3) == 'Day' ) ) then
!!$ a_time = a_time * DAY_SECONDS
!!$ else
!!$ call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
!!$ end if
!-----
if ( TSDataInfo % tmax >= 2 ) then
if ( FlagYearCyclic ) then
CurrentTimeInSec = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )
else
CurrentTimeInSec = TimeN + TSDataInfo%TimeFromOriginToInitialDate
end if
!-----
!!$ allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
!!$ TSDataInfo % a_time(0) = - ( YEAR_DAYS * DAY_SECONDS - a_time(TSDataInfo%tmax) )
!!$ do t = 1, TSDataInfo%tmax
!!$ TSDataInfo % a_time(t) = a_time(t)
!!$ end do
!!$ TSDataInfo % a_time(TSDataInfo%tmax+1) = YEAR_DAYS * DAY_SECONDS + a_time(1)
!!$ deallocate( a_time )
!-----
allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then
! convert unit of time from day to sec
TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
else
call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
end if
! set time in hallo regions
if ( FlagYearCyclic ) then
TSDataInfo % a_time(0 ) = - ( day_in_year * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year * sec_in_day + TSDataInfo % a_time(1 )
else
TSDataInfo % a_time(0 ) = TSDataInfo % a_time(1 ) - 1.0_DP
TSDataInfo % a_time(TSDataInfo%tmax+1) = TSDataInfo % a_time(TSDataInfo%tmax ) + 1.0_DP
end if
allocate( TSDataInfo % a_tindex(1:2) )
allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:2) )
TSDataInfo % a_tindex(1) = 0
TSDataInfo % a_tindex(2) = 1
do t = 1, TSDataInfo%tmax
if ( TSDataInfo % a_time(t) <= CurrentTimeInSec ) then
TSDataInfo % a_tindex(1) = t
TSDataInfo % a_tindex(2) = t+1
end if
end do
! set time index
if ( FlagYearCyclic ) then
tindex = TSDataInfo % a_tindex(1)
if ( tindex == 0 ) then
tindex = TSDataInfo % tmax
else if ( tindex == TSDataInfo % tmax + 1 ) then
tindex = 1
else
tindex = tindex
end if
else
tindex = TSDataInfo % a_tindex(1)
tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
end if
if ( TSDataInfo % NDims == 0 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else if ( TSDataInfo % NDims == 2 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
end if
! set time index
if ( FlagYearCyclic ) then
tindex = TSDataInfo % a_tindex(2)
if ( tindex == 0 ) then
tindex = TSDataInfo % tmax
else if ( tindex == TSDataInfo % tmax + 1 ) then
tindex = 1
else
tindex = tindex
end if
else
tindex = TSDataInfo % a_tindex(2)
tindex = min( max( tindex, 1 ), TSDataInfo % tmax )
end if
if ( TSDataInfo % NDims == 0 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else if ( TSDataInfo % NDims == 2 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
else
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
end if
allocate( TSDataInfo%xyz_VarTimeInterpolated(0:imax-1, 1:jmax, 1:TSDataInfo%NVLevels) )
else
!-----
!!$ allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
!!$ do t = 1, TSDataInfo%tmax
!!$ TSDataInfo % a_time(t) = a_time(t)
!!$ end do
!-----
allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then
! convert unit of time from day to sec
TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
else
call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
end if
allocate( TSDataInfo % a_tindex(1:1) )
allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:1) )
TSDataInfo % a_tindex(1) = 1
if ( TSDataInfo % NDims == 0 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(0,1,1,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
else if ( TSDataInfo % NDims == 2 ) then
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
else
call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
end if
end if
end subroutine StructureInit
| Subroutine : | |
| TSDataInfo : | type(time_series_data), intent(inout) |
subroutine UpdateTime( TSDataInfo )
! モジュール引用 ; USE statements
!
! 暦と日時の取り扱い
! Calendar and Date handler
!
use dc_calendar, only: DC_CAL_DATE ! 日時を表現するデータ型.
! Data type for date and time
! 日付および時刻の取り扱い
! Date and time handler
!
use dc_calendar, only: DCCalInquire, DCCalDateCreate, DCCalDateInquire, DCCalDateChkLeapYear
! 時刻管理
! Time control
!
use timeset, only: TimeN, InitialDate
! 宣言文 ; Declaration statements
!
implicit none
type(time_series_data), intent(inout):: TSDataInfo
! 作業変数
! Work variables
!
integer :: hour_in_day, min_in_hour, day_in_year
integer, pointer :: day_in_month_ptr(:) => null()
real(DP) :: sec_in_min, sec_in_day
integer :: year
type(DC_CAL_DATE) :: PreYearDate
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
if ( TSDataInfo % tmax >= 2 ) then
call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day = hour_in_day , min_in_hour = min_in_hour , sec_in_min = sec_in_min ) ! (out)
day_in_year = sum( day_in_month_ptr )
deallocate( day_in_month_ptr )
sec_in_day = hour_in_day * min_in_hour * sec_in_min
! Set TSDataInfo % a_time(0)
!
call DCCalDateInquire( year = year, elapse_sec = TimeN, date = InitialDate )
call DCCalDateCreate( year = year - 1, month = 1, day = 1, hour = 0, min = 0, sec = 0.0_DP, date = PreYearDate )
if ( DCCalDateChkLeapYear( 0.0_DP, PreYearDate ) ) then
TSDataInfo % a_time(0 ) = - ( ( day_in_year + 1 ) * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
else
TSDataInfo % a_time(0 ) = - ( day_in_year * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
end if
! Set TSDataInfo % a_time(TSDataInfo%tmax+1)
!
if ( DCCalDateChkLeapYear( TimeN, InitialDate ) ) then
TSDataInfo % a_time(TSDataInfo%tmax+1) = ( day_in_year + 1 ) * sec_in_day + TSDataInfo % a_time(1 )
else
TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year * sec_in_day + TSDataInfo % a_time(1 )
end if
end if
end subroutine UpdateTime
| Subroutine : | |
| NVLevels : | integer , intent(in ) |
| z_VLevelsIn(1:NVLevels) : | real(DP), intent(in ) |
| xyz_VarIn(0:imax-1, 1:jmax, 1:NVLevels) : | real(DP), intent(in ) |
| xyz_VarOut(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out) |
| FlagLogVLev : | logical , intent(in ), optional |
| FlagLog : | logical , intent(in ), optional |
| FlagPositiveDef : | logical , intent(in ), optional |
subroutine VerticalInterpolation( NVLevels, z_VLevelsIn, xyz_VarIn, xyz_VLevelsOut, xyz_VarOut, FlagLogVLev, FlagLog, FlagPositiveDef )
! モジュール引用 ; USE statements
!
! 宣言文 ; Declaration statements
!
implicit none
integer , intent(in ):: NVLevels
real(DP), intent(in ):: z_VLevelsIn(1:NVLevels)
real(DP), intent(in ):: xyz_VarIn (0:imax-1, 1:jmax, 1:NVLevels)
real(DP), intent(in ):: xyz_VlevelsOut(0:imax-1, 1:jmax, 1:kmax)
real(DP), intent(out):: xyz_VarOut (0:imax-1, 1:jmax, 1:kmax)
logical , intent(in ), optional:: FlagLogVLev
logical , intent(in ), optional:: FlagLog
logical , intent(in ), optional:: FlagPositiveDef
! 作業変数
! Work variables
!
logical:: FlagLogVLevLV
logical:: FlagLogLV
logical:: FlagPositiveDefLV
integer:: i
integer:: j
integer:: k
integer:: kk
integer:: xyz_kk(0:imax-1, 1:jmax, 1:kmax)
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. read_time_series_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
! Check order of vertical levels
!
if ( z_VlevelsIn(1) < z_VlevelsIn(2) ) then
call MessageNotify( 'E', module_name, 'The order of vertical levels is inappropriate.' )
end if
! Flags are checked
!
if ( present( FlagLogVLev ) ) then
FlagLogVLevLV = FlagLogVLev
else
FlagLogVLevLV = .false.
end if
if ( present( FlagLog ) ) then
FlagLogLV = FlagLog
else
FlagLogLV = .false.
end if
if ( present( FlagPositiveDef ) ) then
FlagPositiveDefLV = FlagPositiveDef
else
FlagPositiveDefLV = .false.
end if
xyz_kk = 1
do kk = 1, NVLevels-1
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(kk) ) then
xyz_kk(i,j,k) = kk
end if
end do
end do
end do
end do
if ( FlagLogVLevLV ) then
if ( FlagLogLV ) then
! log-log
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
!!$ if ( xyz_VLevelsOut(i,j,k) > z_VLevelsIn(1) ) then
!!$ xyz_VarOut(i,j,k) = xyz_VarIn(i,j,1)
!!$
!!$! else if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(NVLevels) ) then
!!$! call MessageNotify( 'E', module_name, 'Vertical level is out of given range.' )
!!$!! xyz_VarOut(i,j,k) = 0.0d0
!!$
!!$ else
!!$
!!$ xyz_VarOut(i,j,k) = &
!!$ & ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) - xyz_VarIn(i,j,xyz_kk(i,j,k)) ) &
!!$ & / log( z_VLevelsIn (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k)) ) &
!!$ & * log( xyz_VLevelsOut(i,j,k) / z_VLevelsIn(xyz_kk(i,j,k)) ) &
!!$ & + xyz_VarIn(i,j,xyz_kk(i,j,k))
!!$
!!$ end if
xyz_VarOut(i,j,k) = log( ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) + 1.0d-100 ) / ( xyz_VarIn(i,j,xyz_kk(i,j,k) ) + 1.0d-100 ) ) / log( z_VLevelsIn (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k)) ) * log( xyz_VLevelsOut(i,j,k) / z_VLevelsIn(xyz_kk(i,j,k)) ) + log( xyz_VarIn(i,j,xyz_kk(i,j,k)) + 1.0d-100 )
xyz_VarOut(i,j,k) = exp( xyz_VarOut(i,j,k) )
end do
end do
end do
else
! log-linear
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
xyz_VarOut(i,j,k) = ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) - xyz_VarIn(i,j,xyz_kk(i,j,k) ) ) / log( z_VLevelsIn (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k)) ) * log( xyz_VLevelsOut(i,j,k) / z_VLevelsIn(xyz_kk(i,j,k)) ) + xyz_VarIn(i,j,xyz_kk(i,j,k))
end do
end do
end do
end if
else
if ( FlagLogLV ) then
! linear-log
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
xyz_VarOut(i,j,k) = log( ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) + 1.0d-100 ) / ( xyz_VarIn(i,j,xyz_kk(i,j,k) ) + 1.0d-100 ) ) / ( z_VLevelsIn(xyz_kk(i,j,k)+1) - z_VLevelsIn(xyz_kk(i,j,k) ) ) * ( xyz_VLevelsOut(i,j,k) - z_VLevelsIn(xyz_kk(i,j,k)) ) + log( xyz_VarIn(i,j,xyz_kk(i,j,k)) + 1.0d-100 )
xyz_VarOut(i,j,k) = exp( xyz_VarOut(i,j,k) )
end do
end do
end do
else
! linear-linear
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
xyz_VarOut(i,j,k) = ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) - xyz_VarIn(i,j,xyz_kk(i,j,k) ) ) / ( z_VLevelsIn(xyz_kk(i,j,k)+1) - z_VLevelsIn(xyz_kk(i,j,k) ) ) * ( xyz_VLevelsOut(i,j,k) - z_VLevelsIn(xyz_kk(i,j,k)) ) + xyz_VarIn(i,j,xyz_kk(i,j,k))
end do
end do
end do
end if
end if
if ( FlagPositiveDefLV ) then
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
if ( xyz_VarOut(i,j,k) < 0.0d0 ) then
xyz_VarOut(i,j,k) = 0.0d0
end if
end do
end do
end do
end if
!!$ i = 0
!!$ j = jmax / 2
!!$ do k = 1, NVLevels
!!$ write( 92, * ) z_VLevelsIn(k), xyz_VarIn(i,j,k)
!!$ end do
!!$ write( 92, * )
!!$ call flush( 92 )
!!$ do k = 1, kmax
!!$ write( 93, * ) xyz_VLevelsOut(i,j,k), xyz_VarOut(i,j,k)
!!$ end do
!!$ write( 93, * )
!!$ call flush( 93 )
!!$ stop
end subroutine VerticalInterpolation
| Constant : | |||
| module_name = ‘read_time_series_from_file‘ : | character(*), parameter
|
| Variable : | |||
| read_time_series_inited = .false. : | logical, save
|
| Derived Type : | |||
| Keyword : | character(STRING)
| ||
| FileName : | character(STRING)
| ||
| VarName : | character(STRING)
| ||
| NDims : | integer | ||
| tmax : | integer | ||
| NVLevels : | integer | ||
| z_VLevels(:) : | real(DP), pointer | ||
| a_time(:) : | real(DP), pointer | ||
| a_tindex(:) : | integer , pointer | ||
| xyza_SavedData(:,:,:,:) : | real(DP), pointer | ||
| xyz_VarTimeInterpolated(:,:,:) : | real(DP), pointer | ||
| TimeFromOriginToInitialDate : | real(DP) |
| Constant : | |||
| version = ’$Name: dcpam5-20140204-3 $’ // ’$Id: read_time_series.f90,v 1.17 2013-03-01 14:16:09 yot Exp $’ : | character(*), parameter
|