| Class | surface_data |
| In: |
prepare_data/surface_data.f90
|
Note that Japanese and English are described in parallel.
GCM で用いる地表面データを生成します. 現在は暫定的に Hosaka et al. (1998) の SST 分布を与えます.
Surface data for GCM is generated. Now, SST profile in Hosaka et al. (1998) is provided tentatively.
| SetSurfData : | 地表面データの取得 |
| ———— : | ———— |
| SetSurfData : | Set surface data |
| Subroutine : | |||
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfAlbedo(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfHumidCoef(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfRoughLength(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfHeatCapacity(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_DeepSubSurfHeatFlux(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfType(0:imax-1, 1:jmax) : | integer , intent(out), optional
| ||
| xy_SurfCond(0:imax-1, 1:jmax) : | integer , intent(out), optional
| ||
| xy_SeaIceConc(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SoilHeatCap(0:imax-1,1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SoilHeatDiffCoef(0:imax-1,1:jmax) : | real(DP), intent(out), optional
|
GCM 用の地表面データを返します.
Return surface data for GCM.
subroutine SetSurfData( xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoef, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_DeepSubSurfHeatFlux, xy_SurfType, xy_SurfCond, xy_SeaIceConc, xy_SoilHeatCap, xy_SoilHeatDiffCoef )
!
! GCM 用の地表面データを返します.
!
! Return surface data for GCM.
!
! モジュール引用 ; USE statements
!
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 物理・数学定数設定
! Physical and mathematical constants settings
!
use constants0, only: PI ! $ \pi $.
! 円周率. Circular constant
! 座標データ設定
! Axes data settings
!
use axesset, only: y_Lat ! $ \varphi $ [rad.] . 緯度. Latitude
! ファイルから 1 次元プロファイルを読んで設定する.
! read 1-D profile from a file and set it
!
use set_1d_profile, only : Set1DProfileSurfTemp
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(out), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
real(DP), intent(out), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
! 地表アルベド.
! Surface albedo
real(DP), intent(out), optional:: xy_SurfHumidCoef (0:imax-1, 1:jmax)
! 地表湿潤度.
! Surface humidity coefficient
real(DP), intent(out), optional:: xy_SurfRoughLength (0:imax-1, 1:jmax)
! 地表粗度長.
! Surface rough length
real(DP), intent(out), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
! 地表熱容量.
! Surface heat capacity
real(DP), intent(out), optional:: xy_DeepSubSurfHeatFlux (0:imax-1, 1:jmax)
! 地中熱フラックス.
! "Deep subsurface heat flux"
! Heat flux at the bottom of surface/soil layer.
integer , intent(out), optional:: xy_SurfType (0:imax-1, 1:jmax)
! 土地利用
! Surface index
integer , intent(out), optional:: xy_SurfCond (0:imax-1, 1:jmax)
! 地表状態 (0: 固定, 1: 可変) .
! Surface condition (0: fixed, 1: variable)
real(DP), intent(out), optional:: xy_SeaIceConc(0:imax-1, 1:jmax)
! 海氷面密度
! Sea ice concentration
real(DP), intent(out), optional:: xy_SoilHeatCap(0:imax-1,1:jmax)
! 土壌熱容量 (J K-1 kg-1)
! Specific heat of soil (J K-1 kg-1)
real(DP), intent(out), optional:: xy_SoilHeatDiffCoef(0:imax-1,1:jmax)
! 土壌熱伝導係数 (J m-3 K-1)
! Heat conduction coefficient of soil (J m-3 K-1)
! 作業変数
! Work variables
!
!!$ integer:: i ! 経度方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
!!$ integer:: k ! 鉛直方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in vertical direction
! 実行文 ; Executable statement
! 初期化確認
! Initialization check
!
if ( .not. surface_data_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
select case ( LChar( trim(Pattern) ) )
case ( 'homogeneous' )
! SST 一様
! SST is homogeneous
!
if ( present(xy_SurfTemp) ) xy_SurfTemp = SurfTemp
case ( 'hosaka et al. (1998)' )
! Hosaka et al. (1998) において用いられた SST
! SST used in Hosaka et al. (1998)
!
if ( present( xy_SurfTemp ) ) then
call Hosakaetal98SST( xy_SurfTemp )
end if
case ( 'nh01_control' )
! Neale and Hoskins (2000) の control experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( 'control', xy_SurfTemp )
end if
case ( 'nh01_peaked' )
! Neale and Hoskins (2000) の peaked experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( 'peaked', xy_SurfTemp )
end if
case ( 'nh01_flat' )
! Neale and Hoskins (2000) の flat experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( 'flat', xy_SurfTemp )
end if
case ( 'nh01_control-5n' )
! Neale and Hoskins (2000) の control-5n experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( 'control-5n', xy_SurfTemp )
end if
case ( 'nh01_qobs' )
! Neale and Hoskins (2000) の qobs experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( 'qobs', xy_SurfTemp )
end if
case ( 'nh01_1keq' )
! Neale and Hoskins (2000) の 1keq experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( '1keq', xy_SurfTemp )
end if
case ( 'nh01_3keq' )
! Neale and Hoskins (2000) の 3keq experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( '3keq', xy_SurfTemp )
end if
case ( 'nh01_3kw1' )
! Neale and Hoskins (2000) の 3kw1 experiment において用いられた SST
! SST used for Control experiment by Neale and Hoskins (2000)
!
if ( present( xy_SurfTemp ) ) then
call NH01SST( '3kw1', xy_SurfTemp )
end if
case ( '1-d profile' )
if ( present( xy_SurfTemp ) ) then
call Set1DProfileSurfTemp( xy_SurfTemp )
end if
case default
call MessageNotify( 'E', module_name, 'Pattern=<%c> is invalid.', c1 = trim(Pattern) )
end select
if ( present(xy_SurfAlbedo ) ) xy_SurfAlbedo = Albedo
if ( present(xy_SurfHumidCoef ) ) xy_SurfHumidCoef = HumidCoef
if ( present(xy_SurfRoughLength ) ) xy_SurfRoughLength = RoughLength
if ( present(xy_SurfHeatCapacity ) ) xy_SurfHeatCapacity = HeatCapacity
if ( present(xy_DeepSubSurfHeatFlux ) ) xy_DeepSubSurfHeatFlux = TempFlux
if ( present(xy_SurfType ) ) xy_SurfType = SurfType
if ( present(xy_SurfCond ) ) xy_SurfCond = SurfCond
if ( present(xy_SeaIceConc ) ) xy_SeaIceConc = SeaIceConc
if ( present(xy_SoilHeatCap ) ) xy_SoilHeatCap = SoilHeatCap
if ( present(xy_SoilHeatDiffCoef ) ) xy_SoilHeatDiffCoef = SoilHeatDiffCoef
end subroutine SetSurfData
| Subroutine : |
This procedure input/output NAMELIST#surface_data_nml .
subroutine SurfDataInit
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 宣言文 ; Declaration statements
!
implicit none
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
namelist /surface_data_nml/ Pattern, SurfTemp, Albedo, HumidCoef, RoughLength, HeatCapacity, TempFlux, SurfType, SurfCond, SeaIceConc, SoilHeatCap, SoilHeatDiffCoef
!
! デフォルト値については初期化手続 "surface_data#SurfDataInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "surface_data#SurfDataInit" for the default values.
!
! 実行文 ; Executable statement
if ( surface_data_inited ) return
! デフォルト値の設定 (まずは Pattern のみ)
! Default values settings (At first, "Pattern" only)
!
!!$ Pattern = 'Hosaka et al. (1998)'
Pattern = 'homogeneous'
SurfTemp = 273.15_DP
Albedo = 0.15_DP
HumidCoef = 1.0_DP
RoughLength = 1.0e-4_DP
HeatCapacity = 0.0_DP
TempFlux = 0.0_DP
SurfType = 0
SurfCond = 0
SeaIceConc = 0.0_DP
SoilHeatCap = 2.1d6
! volumetric heat capacity (J m-3 K-1)
! Value of Clay for porosity f=0.4, volumetric wetness theta=0.2 in Table 12.3 by
! Hillel (2004).
! Note that the unit of Table 12.3 of Hillel (2004) would be wrong. Although the
! unit in the Table is wrong, the volumetric heat capacity of 2.1d6 J m-3 K-1 is
! within the range of typical value of it.
SoilHeatDiffCoef = 1.2d0
! thermal conductivity (W m-1 K-1)
! Value of Clay for porosity f=0.4, volumetric wetness theta=0.2 in Table 12.3 by
! Hillel (2004).
! Reference
!
! Hillet, D.,
! Introduction to Environmental Soil Physics,
! Elsevier Academic Press, pp494, 2004.
! Sample values for Mars
! These values were obtained from Kiefer (1976) and Kieffer et al. (1977).
! Reference
! Kieffer, Science, 194, 1344-1346, 1976.
! Kieffer et al., JGR, 82, 4249-4291, 1977.
!
! Standard model: see Kieffer et al. (1977) p. 4286,
! albedo, A = 0.25
! (Kieffer et al., 1977)
! thermal inertia, I = 6.5e-3 cal cm-2 s-1/2 K-1 = 272 J m-2 s-1/2 K-1
! (Kieffer et al., 1977)
! density, rho = 1.65 g cm-3 = 1650 kg m-3
! (Kieffer, 1976)
! specific heat, cp = 0.14 cal g-1 K-1 = 586 J kg-1 K-1
! (Kieffer, 1976)
!
! heat capacity, cp*rho = 0.97e6 J m-3 K-1
! conduction coefficient, k = I**2 / (cp*rho) = 7.6e-2 J m-1 s-1 K-1
!
!!$ SoilHeatCap = 0.97d6
!!$ SoilHeatDiffCoef = 0.076d0
! NOTE:
! Values by Kieffer (1976) and Kieffer et al. (1977) would be appropriate for GCM
! experiment.
! Sample values for Mars
! These values were obtained from Savijarvi (1995).
! Reference
! Savijarvi, H., Mars boundary layer modeling: Diurnal moisture cycle and soil
! properties at the Viking lander 1 site, Icarus, 117, 120-127, 1995.
!
!!$ SoilHeatCap = 0.8d6
!!$ SoilHeatDiffCoef = 0.18d0
! NAMELIST の読み込み (まずは Pattern のみ)
! NAMELIST is input (At first, "Pattern" only)
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = surface_data_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
end if
! NAMELIST の読み込み
! NAMELIST is input
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = surface_data_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
end if
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, ' Pattern = %c', c1 = trim(Pattern) )
call MessageNotify( 'M', module_name, ' SurfTemp = %f', d = (/ SurfTemp /) )
call MessageNotify( 'M', module_name, ' Albedo = %f', d = (/ Albedo /) )
call MessageNotify( 'M', module_name, ' HumidCoef = %f', d = (/ HumidCoef /) )
call MessageNotify( 'M', module_name, ' RoughLength = %f', d = (/ RoughLength /) )
call MessageNotify( 'M', module_name, ' HeatCapacity = %f', d = (/ HeatCapacity /) )
call MessageNotify( 'M', module_name, ' TempFlux = %f', d = (/ TempFlux /) )
call MessageNotify( 'M', module_name, ' SurfType = %d', i = (/ SurfType /) )
call MessageNotify( 'M', module_name, ' SurfCond = %d', i = (/ SurfCond /) )
call MessageNotify( 'M', module_name, ' SeaIceConc = %f', d = (/ SeaIceConc /) )
call MessageNotify( 'M', module_name, ' SoilHeatCap = %f', d = (/ SoilHeatCap /) )
call MessageNotify( 'M', module_name, ' SoilHeatDiffCoef = %f', d = (/ SoilHeatDiffCoef /) )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
surface_data_inited = .true.
end subroutine SurfDataInit
| Subroutine : | |||
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(out)
|
GCM 用の地表面データを返します.
Return surface data for GCM.
subroutine Hosakaetal98SST( xy_SurfTemp )
!
! GCM 用の地表面データを返します.
!
! Return surface data for GCM.
!
! モジュール引用 ; USE statements
!
! 座標データ設定
! Axes data settings
!
use axesset, only: y_Lat ! $ \varphi $ [rad.] . 緯度. Latitude
! 物理・数学定数設定
! Physical and mathematical constants settings
!
use constants0, only: PI ! $ \pi $.
! 円周率. Circular constant
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(out) :: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
! 作業変数 (Hosaka et al. (1998))
! Work variables (Hosaka et al. (1998))
!
real(DP):: TempEq ! 赤道上 (正確には LatCenter 上) での温度.
! Temperature on the equator
! (on LatCenter, to be exact)
real(DP):: LatCenter ! 温度最高の緯度.
! Latitude on which temperature is maximum.
real(DP):: LatFlatWidth ! 温度が平坦化される緯度幅.
! Latitude width in which temperature is flattened
integer:: jp
integer:: jm
real(DP):: LatA, Alpha, Beta, Gamma
real(DP):: Phi1, AlphaBeta4, Phi, LatAPlus, LatAMinus
real(DP):: SurfTempMx
! 作業変数
! Work variables
!
!!$ integer:: i ! 経度方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
!!$ integer:: k ! 鉛直方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in vertical direction
! 実行文 ; Executable statement
! 初期化確認
! Initialization check
!
if ( .not. surface_data_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
! Hosaka et al. (1998) において用いられた SST
! SST used in Hosaka et al. (1998)
!
!!$ TempEq = SurfTemp
TempEq = 302.0_DP
LatCenter = 0.0_DP
LatFlatWidth = 7.0_DP
LatA = 30.0_DP
Alpha = 60.0_DP
Beta = 32.0_DP
Gamma = 0.0_DP
Phi1 = abs( LatA * PI / 180.0_DP )
AlphaBeta4 = 2.0_DP *( Phi1**3 ) * ( Beta / Alpha )
do j = 1, jmax
Phi = abs( y_Lat(j) - LatCenter * PI / 180.0_DP )
xy_SurfTemp (:,j) = TempEq - Alpha / 2.0_DP * ( Phi - max( sqrt( Phi1**2 + AlphaBeta4 ) - sqrt( ( Phi - Phi1 )**2 + AlphaBeta4 ), 0.0_DP ) ) + Gamma * ( Phi**3 )
end do
! 中心 LatCenter +/- LatFlatWidth の間を平坦に
! Flatten between LatCenter +/- LatFlatWidth
!
if ( LatFlatWidth < 0.0_DP ) then
LatFlatWidth = - LatFlatWidth
end if
LatAPlus = ( LatCenter + LatFlatWidth ) * PI / 180.0_DP
LatAMinus = ( LatCenter - LatFlatWidth ) * PI / 180.0_DP
jp = 1
jm = jmax
do j = 1, jmax
if ( y_Lat(j) <= LatAPlus ) then
jp = j
if ( j == jmax ) jp = jp - 1
end if
if ( y_Lat(j) < LatAMinus ) then
jm = j
if ( j == jmax ) jm = jm - 1
end if
end do
if ( jmax /= 1 ) then
SurfTempMx = ( xy_SurfTemp(0,jm) * ( y_Lat(jm+1) - LatAMinus ) + xy_SurfTemp(0,jm+1) * ( LatAMinus - y_Lat(jm) ) ) / ( y_Lat(jm+1) - y_Lat(jm) )
xy_SurfTemp(:,jm+1:jp) = SurfTempMx
end if
end subroutine Hosakaetal98SST
| Subroutine : | recursive | ||
| SSTType : | character(len=*), intent(in ) | ||
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP) , intent(inout)
|
Set SST described by Neale and Hoskins (2000)
recursive subroutine NH01SST( SSTType, xy_SurfTemp )
!
! Set SST described by Neale and Hoskins (2000)
!
! モジュール引用 ; USE statements
!
! 座標データ設定
! Axes data settings
!
use axesset, only: x_Lon, y_Lat ! $ \varphi $ [rad.] . 緯度. Latitude
! 物理・数学定数設定
! Physical and mathematical constants settings
!
use constants0, only: PI ! $ \pi $.
! 円周率. Circular constant
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 宣言文 ; Declaration statements
!
implicit none
character(len=*), intent(in ) :: SSTType
real(DP) , intent(inout) :: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
! 作業変数
! Work variables
!
real(DP) :: Temp0 ! Zero degree Celsius
! Latitude width in which temperature is flattened
real(DP) :: xy_SurfTempTmp1 (0:imax-1, 1:jmax)
real(DP) :: xy_SurfTempTmp2 (0:imax-1, 1:jmax)
real(DP) :: TAmp
real(DP) :: LonCen
real(DP) :: LonWid
real(DP) :: LatWid
! 作業変数
! Work variables
!
integer:: i ! 経度方向に回る DO ループ用作業変数
! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
!!$ integer:: k ! 鉛直方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in vertical direction
! 実行文 ; Executable statement
Temp0 = 273.15d0
if ( SSTType == 'control' ) then
! Neale and Hoskins (2000) の control experiment において用いられた SST
! SST used for control experiment by Neale and Hoskins (2000)
!
do j = 1, jmax
if ( abs( y_Lat(j) ) < PI / 3.0d0 ) then
xy_SurfTemp(:,j) = 27.0d0 * ( 1.0d0 - sin( 3.0d0 * y_Lat(j) / 2.0d0 )**2 )
else
xy_SurfTemp(:,j) = 0.0d0
end if
end do
xy_SurfTemp = xy_SurfTemp + Temp0
else if ( SSTType == 'peaked' ) then
! Neale and Hoskins (2000) の Peaked experiment において用いられた SST
! SST used for Peaked experiment by Neale and Hoskins (2000)
!
do j = 1, jmax
if ( abs( y_Lat(j) ) < PI / 3.0d0 ) then
xy_SurfTemp(:,j) = 27.0d0 * ( 1.0d0 - 3.0d0 * abs( y_Lat(j) ) / PI )
else
xy_SurfTemp(:,j) = 0.0d0
end if
end do
xy_SurfTemp = xy_SurfTemp + Temp0
else if ( SSTType == 'flat' ) then
! Neale and Hoskins (2000) の Flat experiment において用いられた SST
! SST used for Flat experiment by Neale and Hoskins (2000)
!
do j = 1, jmax
if ( abs( y_Lat(j) ) < PI / 3.0d0 ) then
xy_SurfTemp(:,j) = 27.0d0 * ( 1.0d0 - sin( 3.0d0 * y_Lat(j) / 2.0d0 )**4 )
else
xy_SurfTemp(:,j) = 0.0d0
end if
end do
xy_SurfTemp = xy_SurfTemp + Temp0
else if ( SSTType == 'control-5n' ) then
! Neale and Hoskins (2000) の Control-5N experiment において用いられた SST
! SST used for Control-5N experiment by Neale and Hoskins (2000)
!
do j = 1, jmax
if ( y_Lat(j) < - PI / 3.0d0 ) then
xy_SurfTemp(:,j) = 0.0d0
else if ( y_Lat(j) < PI / 36.0d0 ) then
xy_SurfTemp(:,j) = 27.0d0 * ( 1.0d0 - sin( 90.0d0/65.0d0 * ( y_Lat(j) - PI/36.0d0 ) )**2 )
else if ( y_Lat(j) < PI / 3.0d0 ) then
xy_SurfTemp(:,j) = 27.0d0 * ( 1.0d0 - sin( 90.0d0/55.0d0 * ( y_Lat(j) - PI/36.0d0 ) )**2 )
else
xy_SurfTemp(:,j) = 0.0d0
end if
end do
xy_SurfTemp = xy_SurfTemp + Temp0
else if ( SSTType == 'qobs' ) then
! Neale and Hoskins (2000) の Qobs experiment において用いられた SST
! SST used for Qobs experiment by Neale and Hoskins (2000)
!
call NH01SST( 'control', xy_SurfTempTmp1 )
call NH01SST( 'flat', xy_SurfTempTmp2 )
xy_SurfTemp = ( xy_SurfTempTmp1 + xy_SurfTempTmp2 ) * 0.5d0
else if ( SSTType == '1keq' ) then
! Neale and Hoskins (2000) の 1KEQ experiment において用いられた SST
! SST used for 1KEQ experiment by Neale and Hoskins (2000)
!
call NH01SST( 'control', xy_SurfTemp )
TAmp = 1.0_DP
LonCen = 180.0_DP * PI / 180.0_DP
LonWid = 30.0_DP * PI / 180.0_DP
LatWid = 15.0_DP * PI / 180.0_DP
do j = 1, jmax
do i = 0, imax-1
if ( ( abs( x_Lon(i) - LonCen ) < LonWid ) .and. ( abs( y_Lat(j) ) < LatWid ) ) then
xy_SurfTemp(i,j) = xy_SurfTemp(i,j) + TAmp * cos( PI/2.0d0 * ( x_Lon(i) - LonCen ) / LonWid )**2 * cos( PI/2.0d0 * y_Lat(j) / LatWid )**2
end if
end do
end do
else if ( SSTType == '3keq' ) then
! Neale and Hoskins (2000) の 3KEQ experiment において用いられた SST
! SST used for 1KEQ experiment by Neale and Hoskins (2000)
!
call NH01SST( 'control', xy_SurfTemp )
TAmp = 3.0_DP
LonCen = 180.0_DP * PI / 180.0_DP
LonWid = 30.0_DP * PI / 180.0_DP
LatWid = 15.0_DP * PI / 180.0_DP
do j = 1, jmax
do i = 0, imax-1
if ( ( abs( x_Lon(i) - LonCen ) < LonWid ) .and. ( abs( y_Lat(j) ) < LatWid ) ) then
xy_SurfTemp(i,j) = xy_SurfTemp(i,j) + TAmp * cos( PI/2.0d0 * ( x_Lon(i) - LonCen ) / LonWid )**2 * cos( PI/2.0d0 * y_Lat(j) / LatWid )**2
end if
end do
end do
else if ( SSTType == '3kw1' ) then
! Neale and Hoskins (2000) の 3KW1 experiment において用いられた SST
! SST used for 1KEQ experiment by Neale and Hoskins (2000)
!
call NH01SST( 'control', xy_SurfTemp )
TAmp = 3.0_DP
LonCen = 180.0_DP * PI / 180.0_DP
LatWid = 30.0_DP * PI / 180.0_DP
do j = 1, jmax
do i = 0, imax-1
if ( abs( y_Lat(j) ) < LatWid ) then
xy_SurfTemp(i,j) = xy_SurfTemp(i,j) + TAmp * cos( x_Lon(i) - LonCen ) * cos( PI/2.0d0 * y_Lat(j) / LatWid )**2
end if
end do
end do
else
call MessageNotify( 'E', module_name, 'SSTType=<%c> is invalid.', c1 = trim(SSTType) )
end if
end subroutine NH01SST
| Variable : | |||
| Pattern : | character(STRING), save
|
| Variable : | |||
| SoilHeatCap : | real(DP), save
|
| Variable : | |||
| SoilHeatDiffCoef : | real(DP), save
|
| Variable : | |||
| SurfCond : | integer, save
|
| Constant : | |||
| module_name = ‘surface_data‘ : | character(*), parameter
|
| Variable : | |||
| surface_data_inited = .false. : | logical, save
|
| Constant : | |||
| version = ’$Name: dcpam5-20140218 $’ // ’$Id: surface_data.f90,v 1.14 2013-11-17 03:15:28 yot Exp $’ : | character(*), parameter
|