Class netcdf_wrapper
In: io/netcdf_wrapper.F90

NetCDF のラッパープログラム

NetCDF wrapper

Note that Japanese and English are described in parallel.

gtool で扱わない部分をカバーする NetCDF のラッパープログラム.

The wrapper routines in this module treat NetCDF input/output that are not covered by gtool.

Procedures List

NWInqDimLen :軸の長さを問い合わせる
———— :————
NWInqDimLen :Inquire length of a dimension

NAMELIST

NAMELIST#radiation_DennouAGCM_nml

Methods

Included Modules

dc_types dc_message netcdf mpi_wrapper

Public Instance methods

NWGetAtt( ncfn, varname, attname, att )
Subroutine :
ncfn :character(*), intent(in )
: NetCDF filename
varname :character(*), intent(in )
: Variable name
attname :character(*), intent(in )
: Attribute name
att :character(*), intent(out)
: Attribute

Alias for NWGetAttChar

NWGetAtt( ncfn, varname, attname, att )
Subroutine :
ncfn :character(*), intent(in )
: NetCDF filename
varname :character(*), intent(in )
: Variable name
attname :character(*), intent(in )
: Attribute name
att :integer , intent(out)
: Attribute

Alias for NWGetAttInteger

Subroutine :
ncfn :character(*), intent(in )
: NetCDF filename
dimname :character(*), intent(in )
: Dimension name
len :integer , intent(out)
: Length of a dimension

軸の長さを問い合わせます.

Inquire length of a dimension.

[Source]

  subroutine NWInqDimLen( ncfn, dimname, len )
    !
    ! 軸の長さを問い合わせます. 
    !
    ! Inquire length of a dimension. 
    !

    character(*), intent(in ) :: ncfn
                                  ! NetCDF filename
    character(*), intent(in ) :: dimname
                                  ! Dimension name
    integer     , intent(out) :: len
                                  ! Length of a dimension


    !
    ! Local variables
    !
    character(STRING) :: mode
    integer           :: ncid
    integer           :: dimid
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWInqDimLen"

    mode = "read"
    call NWOpen( NWMkNCFN(ncfn), mode, ncid )

    status = NF90_inq_dimid( ncid, dimname, dimid )
    call NWHandleErr( status, err_mes )

    status = NF90_Inquire_Dimension( ncid, dimid, len = len )
    call NWHandleErr( status, err_mes )

    call NWClose( ncid )


  end subroutine NWInqDimLen
Function :
Flag :logical
ncfn :character(*), intent(in )
: NetCDF filename
varname :character(*), intent(in )
: Variable name

[Source]

  function NWPresentAVarInFile( ncfn, varname ) result( Flag )

    character(*), intent(in ) :: ncfn
                                  ! NetCDF filename
    character(*), intent(in ) :: varname
                                  ! Variable name

    logical                   :: Flag

    ! Local variables
    !
    character(STRING) :: mode
    integer           :: ncid
    integer           :: varid
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWChkAVarInFile"
    err_mes = trim( err_mes ) // ', Var: ' // trim( varname )

    mode = "read"
    call NWOpen( NWMkNCFN(ncfn), mode, ncid )

    status = nf90_inq_varid( ncid, varname, varid )
    if( status == nf90_noerr ) then
      Flag = .true.
    else
      Flag = .false.
      call MessageNotify( 'M', module_name, 'Variable, %c, cannot be found in file, %c.', c1 = trim(varname), c2 = trim(NWMkNCFN(ncfn)) )
    end if

    call NWClose( ncid )

  end function NWPresentAVarInFile

Private Instance methods

Subroutine :
ncid :integer, intent(in)

[Source]

  subroutine NWClose( ncid )

    integer, intent(in) :: ncid


    ! Local variables
    !
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWClose"


    status = nf90_close( ncid )
    call NWHandleErr( status, err_mes )

  end subroutine NWClose
Subroutine :
ncid :integer, intent(in)

[Source]

  subroutine NWEndDef( ncid )

    integer, intent(in) :: ncid


    ! Local variables
    !
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWEndDef"


    status = nf90_enddef( ncid )
    if( ( status .ne. nf90_noerr ) .and. ( status .ne. nf90_enotindefine ) ) call NWHandleErr( status, err_mes )


  end subroutine NWEndDef
Subroutine :
ncfn :character(*), intent(in )
: NetCDF filename
varname :character(*), intent(in )
: Variable name
attname :character(*), intent(in )
: Attribute name
att :character(*), intent(out)
: Attribute

[Source]

  subroutine NWGetAttChar( ncfn, varname, attname, att )

    character(*), intent(in ) :: ncfn
                                  ! NetCDF filename
    character(*), intent(in ) :: varname
                                  ! Variable name
    character(*), intent(in ) :: attname
                                  ! Attribute name
    character(*), intent(out) :: att
                                  ! Attribute


    ! Local variables
    !
    character(STRING) :: mode
    integer           :: ncid
    integer           :: varid
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWGetAttChar"
    err_mes = trim( err_mes ) // ', Var: ' // trim( varname ) // ', Att: ' // trim( attname )

    mode = "read"
    call NWOpen( NWMkNCFN(ncfn), mode, ncid )

    if ( ( varname == 'global' ) .or. ( varname == 'GLOBAL' ) ) then
      varid = NF90_GLOBAL
    else
      status = nf90_inq_varid( ncid, varname, varid )
      call NWHandleErr( status, err_mes )
    end if

    status = nf90_get_att( ncid, varid, attname, att )
    call NWHandleErr( status, err_mes )

    call NWClose( ncid )

  end subroutine NWGetAttChar
Subroutine :
ncfn :character(*), intent(in )
: NetCDF filename
varname :character(*), intent(in )
: Variable name
attname :character(*), intent(in )
: Attribute name
att :integer , intent(out)
: Attribute

[Source]

  subroutine NWGetAttInteger( ncfn, varname, attname, att )

    character(*), intent(in ) :: ncfn
                                  ! NetCDF filename
    character(*), intent(in ) :: varname
                                  ! Variable name
    character(*), intent(in ) :: attname
                                  ! Attribute name
    integer     , intent(out) :: att
                                  ! Attribute


    ! Local variables
    !
    character(STRING) :: mode
    integer           :: ncid
    integer           :: varid
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWGetAttInteger"
    err_mes = trim( err_mes ) // ', Var: ' // trim( varname ) // ', Att: ' // trim( attname )

    mode = "read"
    call NWOpen( NWMkNCFN(ncfn), mode, ncid )

    if ( ( varname == 'global' ) .or. ( varname == 'GLOBAL' ) ) then
      varid = NF90_GLOBAL
    else
      status = nf90_inq_varid( ncid, varname, varid )
      call NWHandleErr( status, err_mes )
    end if

    status = nf90_get_att( ncid, varid, attname, att )
    call NWHandleErr( status, err_mes )

    call NWClose( ncid )

  end subroutine NWGetAttInteger
Subroutine :
status :integer , intent(in)
err_mes :character(*), intent(in), optional

[Source]

  subroutine NWHandleErr( status, err_mes )

    integer     , intent(in)           :: status
    character(*), intent(in), optional :: err_mes


    if( status .ne. nf90_noerr ) then
      if( present( err_mes ) ) print *, trim( err_mes )
      print *, trim( nf90_strerror( status ) )
      stop "STOP"
    end if


  end subroutine NWHandleErr
Function :
ncfn_out :character(STRING)
ncfn_in :character(*), intent(in )
: NetCDF filename

[Source]

  character(STRING) function NWMkNCFN( ncfn_in ) result( ncfn_out )

    ! MPI wrapper
    !
    use mpi_wrapper, only : myrank

    character(*), intent(in ) :: ncfn_in
                                  ! NetCDF filename


#ifdef LIB_MPI
    if ( ncfn_in(len_trim(ncfn_in)-2:len_trim(ncfn_in)) /= '.nc' ) then
      write( 6, * ) trim(ncfn_in), ' is inappropriate.'
      stop
    end if
    write( ncfn_out, '(a,a,i6.6,a)' ) ncfn_in(1:len_trim(ncfn_in)-3), '_rank', myrank, '.nc'
#else
    ncfn_out = ncfn_in
#endif

  end function NWMkNCFN
Subroutine :
path :character(*), intent(in )
mode :character(*), intent(in )
ncid :integer , intent(out)

[Source]

  subroutine NWOpen( path, mode, ncid )

    character(*), intent(in ) :: path
    character(*), intent(in ) :: mode
    integer     , intent(out) :: ncid


    ! Local variables
    !
    integer           :: cmode, omode
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWOpen"
    err_mes = trim( err_mes ) // ', path: ' // trim( path ) // ', mode: ' // trim( mode )


    if( ( mode .eq. "new" ) .or. ( mode .eq. "NEW" ) ) then

      cmode = NF90_CLOBBER
      status = nf90_create( path, cmode, ncid )
      call NWHandleErr( status, err_mes )

    else

      if( ( mode .eq. "read" ) .or. ( mode .eq. "READ" ) ) then
        omode = NF90_NOWRITE
      else if( ( mode .eq. "write" ) .or. ( mode .eq. "WRITE" ) ) then
        omode = NF90_WRITE
      else
        write( 6, * ) "Inproper argument, mode"
        write( 6, * ) "Argument mode should be either of words below."
        write( 6, * ) " 'new', 'NEW', 'read', 'READ', 'write', or 'WRITE'"
        stop
      end if

      status = nf90_open( path, omode, ncid )
      call NWHandleErr( status, err_mes )

    end if


  end subroutine NWOpen
Subroutine :
ncid :integer, intent(in)

[Source]

  subroutine NWReDef( ncid )

    integer, intent(in) :: ncid


    ! Local variables
    !
    integer           :: status
    character(STRING) :: err_mes


    err_mes = "In NWReDef"


    status = nf90_redef( ncid )
    if( ( status .ne. nf90_noerr ) .and. ( status .ne. nf90_eindefine ) ) call NWHandleErr( status, err_mes )


  end subroutine NWReDef
module_name
Constant :
module_name = ‘netcdf_wrapper :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: dcpam5-20140228 $’ // ’$Id: netcdf_wrapper.F90,v 1.3 2011-09-10 18:23:29 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version