Class: NAMELIST

Dynamics_nml( AlphaSound, AlphaNDiff, NDiffRatio, beta )

NAMELIST :

AlphaSound = 5.0d-2 :

real(DP)

:	音波減衰項の係数 (気象庁数値予報課報告・別冊49 より)

AlphaNDiff = 1.0d-3 :

real(DP)

:	4次の数値拡散の係数. CReSS マニュアルより

NDiffRatio = 1.0d0 :

real(DP)

:	速度に対する粘性を上げる場合は数字を 1 以上にする.

beta = 1.0d0 :

real(DP), save

:	クランクニコルソン法なら 0.5 完全陰解法なら 1

ファイルオープン. 情報取得.

This namelist group name is input/output in DynamicsHEVI#Dynamics_Init

arare4fileio_nml( Arare4Prefix )

*NAMELIST* :
`Arare4Prefix` `= "arare4_"` :	`character(STRING), save`

This namelist group name is input/output in Arare4fileio#Arare4fileio_Init

axesset_nml( xmin, xmax, ymin, ymax, zmin, zmax )

NAMELIST :

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in axesset#axesset_init

cloudphys_k1969_nml( Planet, FactorJ, AutoConvTime, QMixCr, FlagDExnerDtCloud, FlagDExnerDtFall )

NAMELIST :

Planet = "" : character(STRING)

FactorJ = 1.0d0 :

real(DP), save

:	雲物理過程のパラメータ木星では 3.0d0 地球では 1.0d0 とする

AutoConvTime = 1.0d3 :

real(DP), save

:	併合成長の時定数 [sec]

QMixCr = 1.0d-3 :

real(DP), save

:	併合成長を生じる臨界混合比 [kg/kg]

FlagDExnerDtCloud = .true. : logical, save

FlagDExnerDtFall = .true. : logical, save

This namelist group name is input/output in cloudphys_k1969#Cloudphys_K1969_Init

cloudphys_marscond_nml( DensIce, NumAerosol, RadiAerosol, Kd, SatRatioCr, SatRtWetAdia, CDensCr )

NAMELIST :

DensIce = 1.565d3 :

real(DP), save

:	固相の密度 [kg/m^3]

NumAerosol = 0.0d0 :

real(DP), save

:	エアロゾルの数密度 [1/kg]

RadiAerosol = 0.0d0 :

real(DP), save

:	エアロゾルの数密度 [1/kg]

Kd = 0.0d0 :

real(DP), save

:	大気の熱伝導係数 [W/K m]

SatRatioCr = 0.0d0 :

real(DP), save

:

臨界飽和比 []

SatRtWetAdia = 0.0d0 :

real(DP), save

:	湿潤断熱線の飽和比 []

CDensCr = 5.0d-5 : real(DP), save

This namelist group name is input/output in Cloudphys_MarsCond#cloudphys_marscond_init

composition_nml( SpcWetSymbol, SpcWetMolFr )

NAMELIST :

SpcWetSymbol(10) :

character(STRING)

:

湿潤成分の化学種名

SpcWetMolFr(10) :

real(DP)

:	湿潤成分の化学種の存在度

This namelist group name is input/output in composition#composition_init

constants_nml( Grav, PressBasis, TempSfc, PressSfc, SpcDrySymbol, SpcDryMolFr, DayTime, CpDry, MolWtDry )

NAMELIST :

Grav = 9.8d0 :

real(DP), save, public

:	重力 [m/s^2]

PressBasis = 965.0d0 :

real(DP), save, public

:	温位の基準圧力 [Pa]

TempSfc = 300.0d0 :

real(DP), save, public

:

地表面温度 [K]

PressSfc = 965.0d0 :

real(DP), save, public

:	地表面圧力 [Pa]

SpcDrySymbol(5) :

character(20)

:

乾燥成分の化学種名

SpcDryMolFr(5) :

real(DP)

:	乾燥成分の化学種の存在度

DayTime = 86400.0d0 :

real(DP), save, public

:	1 日の長さ [s]

CpDry = 0.0d0 :

real(DP), save, public

:	乾燥成分の定圧比熱 [J/K kg]

MolWtDry = 0.0d0 :

real(DP), save, public

:	乾燥成分の分子量 [kg/mol]

This namelist group name is input/output in constants#constants_Init

damping_nml( Time, DepthH, DepthV )

NAMELIST :

Time : real(DP)

DepthH :

real(DP)

:	スポンジ層の厚さ(水平方向)

DepthV :

real(DP)

:	スポンジ層の厚さ(鉛直方向)

This namelist group name is input/output in Damping#Damping_Init

deepconv_main_nml( FlagTurbMethod, FlagRadMethod, FlagCloudMethod, FlagSurfaceMethod )

*NAMELIST* :
`FlagTurbMethod` `= ""` :	`character(STRING)`
`FlagRadMethod` `= ""` :	`character(STRING)`
`FlagCloudMethod` `= ""` :	`character(STRING)`
`FlagSurfaceMethod` `= ""` :	`character(STRING)`

デフォルト値の設定 Default values settings

This namelist group name is input/output in ../src/main/arare.f90#deepconv_arare

deepconv_main_nml( FlagTurbMethod, FlagRadMethod, FlagCloudMethod, FlagSurfaceMethod )

*NAMELIST* :
`FlagTurbMethod` `= ""` :	`character(STRING)`
`FlagRadMethod` `= ""` :	`character(STRING)`
`FlagCloudMethod` `= ""` :	`character(STRING)`
`FlagSurfaceMethod` `= ""` :	`character(STRING)`

デフォルト値の設定 Default values settings

This namelist group name is input/output in ../src/main/arare.f90#deepconv_main

fileset_nml( FileTitle, FileSource, FileInstitution )

NAMELIST :

FileTitle = ‘cloud moist convection experiment‘ :

character(STRING), save, public

:	実験名. Title of experiment

FileSource = ‘deepconv/arare5 (www.gfd-dennou.org/library/deepconv)’ :

character(STRING), save, public

:	データファイル作成プログラム名. Source of data file

FileInstitution = ‘GFD Dennou Club (www.gfd-dennou.org)’ :

character(STRING), save, public

:	データファイル作成者/グループ. Institution or person that changes data files for the last time

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in fileset#fileset_init

gridset_nml( NX, NY, NZ, NCMAX, Xmg, Ymg, Zmg )

NAMELIST :

NX = 10 :

integer, public, save

:

x 方向格子点数

NY = 10 :

integer, public, save

:

y 方向格子点数

NZ = 10 :

integer, public, save

:

z 方向格子点数

NCMAX = 3 :

integer, public, save

:

組成配列要素数

Xmg = 4 :

integer, public, save

:	x 方向糊代格子点数

Ymg = 4 :

integer, public, save

:	y 方向糊代格子点数

Zmg = 4 :

integer, public, save

:	z 方向糊代格子点数

This namelist group name is input/output in gridset#gridset_init

initialdata_basic_nml( Humidity, TempTr, DHight )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_basic_nml( Humidity, TempTr, DHight )

NAMELIST :

Humidity = 0.0d0 :

real(DP)

:	相対湿度 Gauss 用

TempTr = 100.0d0 :

real(DP)

:	対流圏界面の温度 [k]

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_gauss_nml( PTempMax, ExnerMax, QMixMax, Xc, Xr, Yc, Yr, Zc, Zr )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_gauss_nml( PTempMax, ExnerMax, QMixMax, Xc, Xr, Yc, Yr, Zc, Zr )

NAMELIST :

PTempMax = 0.0d0 :

real(DP)

:

最大値

ExnerMax = 0.0d0 :

real(DP)

:

最大値

QMixMax = 0.0d0 :

real(DP)

:

最大値

Xc = 0.0d0 :

real(DP)

:	擾乱の中心位置(X方向)

Xr = 0.0d0 :

real(DP)

:	擾乱の半径(X方向)

Yc = 0.0d0 :

real(DP)

:	擾乱の中心位置(Y方向)

Yr = 0.0d0 :

real(DP)

:	擾乱の半径(Y方向)

Zc = 0.0d0 :

real(DP)

:	擾乱の中心位置(鉛直方向)

Zr = 0.0d0 :

real(DP)

:	擾乱の半径(鉛直方向) Therma-Random 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_moist_nml( Humidity )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_moist_nml( Humidity )

NAMELIST :

Humidity = 0.0d0 :

real(DP)

:	相対湿度 Gauss 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_random_nml( PTempMax, ExnerMax, QMixMax, Zpos )

NAMELIST :

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_random_nml( PTempMax, ExnerMax, QMixMax, Zpos )

NAMELIST :

PTempMax = 0.0d0 :

real(DP)

:

最大値

ExnerMax = 0.0d0 :

real(DP)

:

最大値

QMixMax = 0.0d0 :

real(DP)

:

最大値

Zpos = 0.0d0 :

real(DP)

:	擾乱の Z 座標 [m] Rectangle 用

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_disturb_rectangle_nml( QMixMax, PTempMax, XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax )

NAMELIST :

   NAMELIST /initialdata_disturb_dryreg_nml/ &
     & XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_disturb_rectangle_nml( QMixMax, PTempMax, XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax )

NAMELIST :

QMixMax = 0.0d0 :

real(DP)

:

最大値

PTempMax = 0.0d0 :

real(DP)

:

最大値

XposMin = 0.0d0 :

real(DP)

:	乾燥域の X 座標 [m]

YposMin = 0.0d0 :

real(DP)

:	乾燥域の Y 座標 [m]

ZposMin = 0.0d0 :

real(DP)

:	乾燥域の Z 座標 [m]

XposMax = 0.0d0 :

real(DP)

:	乾燥域の X 座標 [m]

YposMax = 0.0d0 :

real(DP)

:	乾燥域の Y 座標 [m]

ZposMax = 0.0d0 :

real(DP)

:	乾燥域の Z 座標 [m]

NAMELIST /initialdata_disturb_dryreg_nml/ &

  & XposMin, YposMin, ZposMin, XposMax, YposMax, ZposMax

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_nml( FlagBasic, FlagDisturb, FlagDisturbPTemp, FlagDisturbExner, FlagDisturbQMix, FlagDisturbWind )

*NAMELIST* :
`FlagBasic` `= ""` :	`character(STRING)`
`FlagDisturb` `= ""` :	`character(STRING)`
`FlagDisturbPTemp` `= ""` :	`character(STRING)`
`FlagDisturbExner` `= ""` :	`character(STRING)`
`FlagDisturbQMix` `= ""` :	`character(STRING)`
`FlagDisturbWind` `= ""` :	`character(STRING)`

This namelist group name is input/output in ../src/main/arare_init-data.f90#ArareInitData

initialdata_nml( FlagBasic, FlagDisturb, FlagDisturbPTemp, FlagDisturbExner, FlagDisturbQMix, FlagDisturbWind )

*NAMELIST* :
`FlagBasic` `= ""` :	`character(STRING)`
`FlagDisturb` `= ""` :	`character(STRING)`
`FlagDisturbPTemp` `= ""` :	`character(STRING)`
`FlagDisturbExner` `= ""` :	`character(STRING)`
`FlagDisturbQMix` `= ""` :	`character(STRING)`
`FlagDisturbWind` `= ""` :	`character(STRING)`

This namelist group name is input/output in ../src/main/arare_init-data.f90#Initialdata_init

initialdata_takemi2007_nml( FlagEnv, FlagWind, VelXSfc )

NAMELIST :

FlagEnv = "" : character(STRING)

FlagWind = "" : character(STRING)

VelXSfc :

real(DP), save

:

地表の速度

設定ファイルから出力ファイルに記載する情報を読み込む

This namelist group name is input/output in initialdata_takemi2007#initialdata_takemi2007_init

radiation_heatbalance_nml( RadCoolRate, HeightHeatUp, HeightHeatDown, HeightCoolUp, HeightCoolDown, FlagDExnerDtRad )

NAMELIST :

RadCoolRate = 0.0d0 :

real(DP),save

:	一様放射加熱率 [K/day]

HeightHeatUp = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の上限

HeightHeatDown = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の下限

HeightCoolUp = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の上限

HeightCoolDown = 0.0d0 :

real(8)

:	放射強制を与える鉛直領域の下限

FlagDExnerDtRad = .true. : logical, save

This namelist group name is input/output in Radiation_HeatBalance#Radiation_heatbalance_init

radiation_simple_nml( RadHeatRate, HeightUp, HeightDown, FlagDExnerDtRad )

NAMELIST :

RadHeatRate = 0.0d0 :

real(DP)

:	一様放射加熱率 [K/day]

HeightUp = 0.0d0 :

real(DP)

:	放射強制を与える鉛直領域の上限

HeightDown = 0.0d0 :

real(DP)

:	放射強制を与える鉛直領域の下限

FlagDExnerDtRad = .true. : logical, save

This namelist group name is input/output in Radiation_Simple#Radiation_Simple_init

restartfileio_nml( InputFile, OutputFile )

*NAMELIST* :
`InputFile` `= "input.nc"` :	`character(STRING), save, private`
`OutputFile` `= "output.nc"` :	`character(STRING), save, private`

This namelist group name is input/output in ReStartFileIO#ReStartFileio_Init

surface_flux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, VelMaxForVel, VelMaxForTemp, VelMaxForQVap, VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax, FlagFixFricTimeConstAtLB, FricTimeConstAtLB, LowLatFricAtLB, FlagFixHeatFluxAtLB, HeatFluxAtLB, FlagFixMassFluxAtLB, MassFluxAtLB, Vel0 )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

VelMinForRi :

real(DP), save

:	$ R_i $ 数用風最小値. Minimum value of velocity for $ R_i $ number

VelMinForVel :

real(DP), save

:	運動量用風最小値. Minimum value of velocity for momentum

VelMinForTemp :

real(DP), save

:	熱用風最小値. Minimum value of velocity for thermal

VelMinForQVap :

real(DP), save

:	水蒸気用風最小値. Minimum value of velocity for vapor

VelMaxForVel :

real(DP), save

:	運動量用風最大値. Maximum value of velocity for momentum

VelMaxForTemp :

real(DP), save

:	熱用風最大値. Maximum value of velocity for thermal

VelMaxForQVap :

real(DP), save

:	水蒸気用風最大値. Maximum value of velocity for vapor

VelBulkCoefMin :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QVapBulkCoefMin :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QVapBulkCoefMax :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

FlagFixFricTimeConstAtLB : logical , save

FricTimeConstAtLB :

real(DP), save

:	下部境界摩擦の時定数 (s). Time constant of surface friction (s).

LowLatFricAtLB :

real(DP), save

:	下部境界摩擦が働く最低緯度 (degree). Lowest latitude where the friction is applied (degree)

FlagFixHeatFluxAtLB : logical , save

HeatFluxAtLB :

real(DP), save

:	下部境界での熱フラックス (W m-2). Heat flux at the lower boundary (W m-2).

FlagFixMassFluxAtLB : logical , save

MassFluxAtLB :

real(DP), save

:	下部境界での質量フラックス (W m-2). 実際にはゼロに固定するために使う程度にしか使えないだろう. Mass flux at the lower boundary (kg m-2 s-1).

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

デフォルト値については初期化手続 "surface_flux_bulk#SurfaceFluxInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_flux_bulk#SurfaceFluxInit" for the default values.

This namelist group name is input/output in surfaceflux_bulk_core#SurfaceFluxInit

surfaceflux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, FlagDExnerDtSurf, VelMinForRi, SfcRoughLength, Vel0, VelBulkCoefMin, TempBulkCoefMin, QmixBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QmixBulkCoefMax )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

FlagDExnerDtSurf = .true. :

logical, save

:	Flag for diabatice heating term in pressure equation

VelMinForRi = 1.0d-8 :

real(DP), save

:	リチャード数計算用速度下限値 Lower limit of velocity for Ri

SfcRoughLength = 1.0d-2 :

real(DP), save

:	祖度長さ Roughness length

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

VelBulkCoefMin = 0.0d0 :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin = 0.0d0 :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QmixBulkCoefMin = 0.0d0 :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax = 1.0d2 :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax = 1.0d2 :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QmixBulkCoefMax = 1.0d2 :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

This namelist group name is input/output in Surfaceflux_bulk#Surfaceflux_Bulk_init

surfaceflux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, SfcRoughLength, Vel0, VelBulkCoefMin, TempBulkCoefMin, QmixBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QmixBulkCoefMax )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

VelMinForRi = 1.0d-8 :

real(DP), save

:	リチャード数計算用速度下限値 Lower limit of velocity for Ri

SfcRoughLength = 1.0d-2 :

real(DP), save

:	祖度長さ Roughness length

Vel0 = 0.0d0 :

real(DP), save

:	下層での水平速度嵩上げ値

VelBulkCoefMin = 0.0d0 :

real(DP), save

:	$ u $ バルク係数最小値. Minimum value of $ u $ bulk coefficient

TempBulkCoefMin = 0.0d0 :

real(DP), save

:	$ T $ バルク係数最小値. Minimum value of $ T $ bulk coefficient

QmixBulkCoefMin = 0.0d0 :

real(DP), save

:	$ q $ バルク係数最小値. Minimum value of $ q $ bulk coefficient

VelBulkCoefMax = 1.0d2 :

real(DP), save

:	$ u $ バルク係数最大値. Maximum value of $ u $ bulk coefficient

TempBulkCoefMax = 1.0d2 :

real(DP), save

:	$ T $ バルク係数最大値. Maximum value of $ T $ bulk coefficient

QmixBulkCoefMax = 1.0d2 :

real(DP), save

:	$ q $ バルク係数最大値. Maximum value of $ q $ bulk coefficient

This namelist group name is input/output in Surfaceflux_bulk_l1979#Surfaceflux_Bulk_init

surfaceflux_const_nml( SfcXMomFluxBtm, SfcXMomFluxTop, SfcYMomFluxBtm, SfcYMomFluxTop, SfcHeatFluxBtm, SfcHeatFluxTop, SfcQmixFluxBtm, SfcQmixFluxTop, FlagDExnerDtSurf )

*NAMELIST* :
`SfcXMomFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcXMomFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcYMomFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcYMomFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcHeatFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcHeatFluxTop` `= 0.0d0` :	`real(DP), save`
`SfcQmixFluxBtm` `= 0.0d0` :	`real(DP), save`
`SfcQmixFluxTop` `= 0.0d0` :	`real(DP), save`
`FlagDExnerDtSurf` `= .true.` :	`logical, save`

This namelist group name is input/output in Surfaceflux_const#Surfaceflux_const_init

surfaceflux_diff_nml( Kappa, FlagDExnerDtSurf )

*NAMELIST* :
`Kappa` `= 800.0d0` :	`real(DP), save`
`FlagDExnerDtSurf` `= .true.` :	`logical, save`

This namelist group name is input/output in Surfaceflux_diff#Surfaceflux_Diff_init

timeset_nml( DelTimeLong, DelTimeShort, IntegPeriod, RestartTime, DelTimeOutput )

NAMELIST :

DelTimeLong = 2.0d0 :

real(DP), save, public

:

長いタイムステップ

DelTimeShort = 2.0d-1 :

real(DP), save, public

:

短いタイムステップ

IntegPeriod = 3600.0d0 :

real(DP), save, public

:

積分時間

RestartTime = 0.0d0 :

real(DP), save, public

:

計算開始時刻

DelTimeOutput = 2.0d0 :

real(DP), save, public

:

出力タイムステップ

This namelist group name is input/output in timeset#timeset_init

turbulence_kw1978_nml( Cm, KmMax, FlagConstTurbCoef, ConstKm, ConstKh, FlagDExnerDtTurb )

NAMELIST :

Cm = 2.0d-1 :

real(DP), save

:	乱流エネルギー診断式の係数

KmMax = 0.0d0 :

real(DP), save

:

最大値

FlagConstTurbCoef : logical, save

ConstKm = 0.0d0 :

real(DP), save

:

定数値

ConstKh = 0.0d0 :

real(DP), save

:

定数値

FlagDExnerDtTurb =.true. : logical, save

This namelist group name is input/output in Turbulence_kw1978#turbulence_kw1978_init

Methods

Public Instance methods